530 Compact Digital Tire Inflator with Pressure Gauge, 255 PSI, Dual Head Air Chuck, 15" Hose, 2.5" Dial, 360 Swivel, Res: 0.1 Display, Backlit, Made in USA, Industrial Grade,Matte Black

Phil way faster than our Bluepoint Air Guns turns on automatically when it detects pressure great value, great gun

Pros: Made in USA. Accuracy is ±0.5 PSI, which is one of the most accurate tire gauges you can buy, at any price. I spent hours looking at manufacturer's websites, and no other gauge came close to +/- 0.5 psi for the entire measurement range. Swiveling head. The bleeder valve only lets out a little bit of air at a time, which is good because it allows you to accurately and slowly release air from an over-inflated tire. Cons: The pros far outweigh the cons, but there are some cons. I wish the lighted display would stay on for a few more seconds. When it arrives, you need to pull off the rubber shock mount to remove a piece of plastic that protects the AAA batteries. Then it is a little bit of trouble to screw the hose back on, but you'll figure it out. Doesn't come with any instructions. You will need to buy a 1/4" NPT air hose quick connect fitting if you want to connect this to your air hose.

The product is good and sturdy over all, if you read the reviews a lot say there is a missing O-Ring, its not missing you’ll need to apply Teflon tape to the threads and that will seal it where the hose connects. The problem I have is, for the price point I should not have to tape or tighten any thing to stop air leaks Period, also the quick connect fitting should have came with it. I’d be hard pressed to see where some one would screw this straight to a air hose and make it a permanent solution. All in all it is well built, poorly constructed, but can be brought up to par if you already have tools and Teflon tape. Would I suggest buying, No not at this price point, The consumer should not have to disassemble add Teflon tape then reassemble this tool or tighten it down to stop leaks all this should be down at the factory on the assembly line. UPDATE: 08/19/20 the chuck is useless on dual bud rims the angle of the head will not allow a connection on the inside vale stem. Like a previous reviewer stated the chuck can not be changed for a straight foot chuck because the hose end is not 1/4 NFT it’s more like 6.5 mm I need one a straight foot dual chuck but wanted the benefits of having a longer chuck also. Needless to say Milton have a 12” dual foot straight chuck for sale here on Amazon. The problem is it’s a 1/4 NFT and the air gauge hose connector is not. So what I did was went to Home Depot (couldn’t wait for Amazon had to roll out) and purchased a 1/4 barb to 1/4 NFT MALE ( the hose on the gauge is 1/4 ) then I purchased a 1/4 NFT female quick connector, and a worm clamp. I cut the the Milton’s bright idea connector off and replaced it with the 1/4 barb to 1/4 male NFT, put the quick connector on it and now the hose end can accommodate a host of things via the quick connector. Now the Milton’s long chuck will work as a quick connect item. You can check air pressure and fill using, the only quirk is once you check the air pressure get your reading and head to the next tire bleed off the residual air in the hose cause that chuck has a spring loaded valve to stop air from escaping, if not it’ll have you gauge reading numbers randomly lol. Other than the proprietary hose end, and the fresh out the box air leaks the gauge is just as solid of a build as you’d expect from Milton. Added photos to give a visual to my setup Update: 08/27/22 added to more photos to show the quick connect with a plug on the bottom, this makes it into a tire pressure gauge, with out needing the hose it seals the bottom end, this would be great for the truckers who are doing a pre trip and want to make sure the pressure is correct with needing to pull out the air hose and connect it to the air supply line.

The product really seemed to be rugged and useful until connected to an air supply. No amount of lubrication quelled the loss of air on the sticky actuator lever causing the compressor to lose air. Sorry for the bad review, maybe your assembly line needs a better testing of the product before shipping. The balance of the product shows good workmanship so adjusting your examining of the finished product is what would've caught the flaw.

I've used Milton fill nozzles with gauges for years. One of my gauges finally broke, so I decided to re3place it with this model. Love it! The gauge actually reads low enough to fill low-pressure ATV/UTV tires. The backlight is a godsend. Having a bleed-off valve is a total plus.

Love it

I found that this to be pretty accurate compared to a 60 dollar commercial tire gauge. Especially if you take the pressure a few pounds over a bleed the tire down to the correct pressure.

I got this since I have the original manual gauge air chuck from milton, pros: very good digital gauge though a bit slower than the manual gauge, also the rubber cover comes off easily while being bumped around so dont drop or drag on the ground the gauge is all plastic otherwise works great

USA made, heavy construction not like the off shore junk, priced fair given it will last for years even when used daily .Gauge lights up and is easy to read

Had a couple small air leaks initially, but just snugged the fittings and solved that problem. It doesn't inflate a tire super fast, but it's accurate and easy to use. Has a cool backlight for use in dark. Milton quality beats the cheaper products by far

Extremely dissapointed; this tool has more leaks than the Titanic! The release button leaks to the point that you can see uncontrollable pressure drop in the tire. Chuck hose leaked whre it attaches to the body and the chuck was not very accurate either. The display... very dim to the point that back light must be used. The other annoying aspects is that the display shuts off too quickly. At the high end price, this was an easy one to return ASAP. The cost is pretentious as this fits in China category tools.

Nicely made, but I don't feel that it's worth the asking price. Canadian tire sells similar ones at half the price, that work quite well. Standard tire chucks don't fit on the end of the hose, due to it being an oddball thread size. Otherwise, it looks well made. Tip: unscrew the brass base of the hose (with the pressure relief button) and apply blue loc-tite gel to the threads. Then, wind the brass section back in, but position the relief button where you want it. Then, it'll be easier to use. It appears that these inflators come with this button in different positions.

Works great