€ 33,91

Description

[Universal Hot Stick Igniter]: the universal silicon nitride hot stick igniter is designed to replacement traditional Igniters of water heaters boilers and fired forced air furnaces, the universal ignitors work compatible with furnace and warm air, silicon nitride igniters compatible with H150 can perfectly replace up to 170 kinds of conventional igniter, cover most of your home's ignition applications to get you through this cold winter.
[Fully Equipped]: great design: the universal igniter compatible with H150 has a durable nitride construction and is equipped with a universal ing bracket to increase the service life of the igniter; The bracket helps you to locate the hot surface igniter more quickly, in addition to the included connection plug, so that it is no longer necessary to remove the furnace igniter from the device to measure the resistance value.
[Simple Operation]: easy to install with just a screwdriver and scissors; Fits perfectly, with no special adjustments; Please be sure that it is recommended to use safety equipment and to disconnect the appliance from utilities prior to any service or repair.
[Durable Quality]: consists of stainless steel 304 bright finish bracket, 1.97'' nitride heating element, 1.18'' ceramic insulator body, non glazed, aluminum polished finish, 15-3/4'' 20AWG/ 250 °C temperature resistance cable; Silicon nitride igniters are the great alternative to traditional ignitors.
[Hot Side Ignitor/Igniter Specification]: rated voltage: AC 120V +/- 10%-15%, 50/60HZ; Cold resistance: 9-17Ω; Rated power: 150W; Temperature at 120v ± 0.5v. 60HZ at 17 sec ≧1180 ℃; Anti overvoltage ability: igniter energized for 1 minute -132V; Igniter current not allowed to increase from 30 seconds to 60 seconds, the front required to move the stand is 10 lbs, Minimum≧5kgf.

120 Volt hot surface ignitor kit with plug replaced for furnace ignitor igniter part How to tell if your igniter is working If the igniter has continuity, your multimeter should read anywhere from 8 to 16 Ohms. If there is no reading on the multimeter or very little change, then there is no continuity, and you will have to replace the new nitride furnace igniter. When the furnace won't light, the igniter doesn't glow, is cracked, broken, burned, cracked, damp, etc., or when the igniter doesn't energize, or when the multimeter doesn't read correctly or varies minimally (if the igniter is energized, the multimeter should read between 9 - 17 ohms). Parameters: Operating voltage: 102-132 Vac Maximum load current: 3 A Insulation temperature: 250°C Frequency: 50/60 Hz Cold resistance: 9-17Ω Rated power: 150W Length: 18.9 inches/ 48 cm Anti overvoltage ability: igniter energized for 1 minute -132V. Igniter current not allowed to increase from 30 seconds to 60 seconds, the front required to move the stand is 10 lbs, Minimum≧5kgf. Package includes: 1 x Hot stick ignitor Notes: Igniter elements are very fragile and sensitive to contamination, they should not be touched under any circumstances. Please be careful and unplug the stove before making repairs. The brands related above are only for purposes of demonstrating compatibility, not use as trademarks, our trademark is Dreyoo.

Reviews

Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition

Fast Delivery to Croatia

Easy Returns & Exchanges

Ask About This Product

Similar Products

› Tools And Home Improvement › Building Supplies › Hvac › Furnace Parts And Accessories

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Croatia. For more details, please visit our Support Page.

Frequently Asked Questions About Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition in Croatia

Where can I buy Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition online at the best price in the Croatia?

desertcart is the best online shopping platform where you can buy Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition available and ready for delivery in Croatia?

desertcart ships the Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition to Zagreb, Split, Rijeka, Osijek, Zadarand more cities in Croatia. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition online?

desertcart buys Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition on desertcart?

Yes, it is absolutely safe to buy Dreyoo Hot Stick Ignitor with Male Plug Compatible with H150, 120V Silicon Nitride Hot Surface Ignitor Replacing Most Surface Ignitors, Furnace Burner for Warm Air Movement, Ignition from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.