--- product_id: 67799433 title: "Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers" brand: "kingroon" price: "€ 3.06" currency: EUR in_stock: false reviews_count: 13 url: https://www.desertcart.hr/products/67799433-kee-pang-all-metal-j-head-v6-hotend-kit-5 store_origin: HR region: Croatia --- # Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers **Brand:** kingroon **Price:** € 3.06 **Availability:** ❌ Out of Stock ## Quick Answers - **What is this?** Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers by kingroon - **How much does it cost?** € 3.06 with free shipping - **Is it available?** Currently out of stock - **Where can I buy it?** [www.desertcart.hr](https://www.desertcart.hr/products/67799433-kee-pang-all-metal-j-head-v6-hotend-kit-5) ## Best For - kingroon enthusiasts ## Why This Product - Trusted kingroon brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Review: V1 Volcano & V6 banger lil kit(12V, use original probes if needed 24V) - I mainly got this for the all metal heat break and the volcano end. Good news for me, all 3 included breaks were all metal. Upon closer inspection, one of them had a much better visual finish. Ran some steelwool and cotton twine with polishing compund through it b4 initial install. The other two have minor scuff marks on inside, might buff out, haven't needed them yet. Been printing with it for over a month and so far zero issues(hence why I haven't needed the other 2). No clogging for me, just make sure to tighten everything while HOT. And apply heatsink compound only between nozzle/block and heat break/heatsink. None between break and block. Basically you want heat escaping the block towards the nozzle not the heat break but the heat that does go up should escape the break through the heatsink as quick as possible. Hope that helps. I didn't use ANY other other hardware from the kit on my ender 3. Just heatsink, throat and block(worth the money). Ender probes just fit(at least in the volcano block they do, didn't use the shorty) and fans get adapted to whatever mount used. My setup went into a direct drive orientation(BMG/Volcano/pancake stepper from desertcart) and so so glad I did. Swapping fillament is a breeze now, print quality improved, stringing is all but gone, using much much lower hotend temp. (From MAX 260/270 on PETG to 230). I fitted a sock from B-GOOD(the V1 is needed for this kit) and it fits nice and snug. I priced out individual parts since i only needed so little from this kit, but even so this was a hard to beat value and everything just fit, I didn't have to worry about ordering incompatible parts. Review: Very good value. - I didn't buy this kit for the heat break they are pretty bad and this is why im giving it a 4 star. If you are buying this for the all metal heat break then this is not for you but paired with a good heat break this works really well with alil tinkering. I figured out the reason everyone is having so much problems with jams and clogs its simple really. These heat breaks are actually 3 different parts the top thread a pipe in the middle and threads on the bottom pressed together. Mine actually has about a 1/16" gap so if your using these print slow and retract very little then buy a good quality heat break. Also the thermistor attached to the hotend was over tightened and causing a short i just used a larger piece of heatshrink spread the wires shrinked it then just a hole for the bolt hope this helps. The attached pics are with all there parts with bad heat breaks extrusions were kinda all of the place sometime to little sometimes to much printed at 50mm/s with a slower print better settings you should be ok. keep printing ## Technical Specifications | Specification | Value | |---------------|-------| | Customer Reviews | 4.1 out of 5 stars 194 Reviews | ## Images ![Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers - Image 1](https://m.media-amazon.com/images/I/61nS4+HtXDL.jpg) ![Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers - Image 2](https://m.media-amazon.com/images/I/61LFrzuGBAL.jpg) ![Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers - Image 3](https://m.media-amazon.com/images/I/71LNFfqKzYL.jpg) ![Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers - Image 4](https://m.media-amazon.com/images/I/41iokR7CFrL.jpg) ![Kee Pang All-Metal J-Head V6 Hotend Kit with 5 Pcs Extruder Print Head and Nozzle Throat + Volcano Heating Block+ 4 Pcs Volcano Extruder Nozzles for 3D Printers - Image 5](https://m.media-amazon.com/images/I/51edUeDOn3L.jpg) ## Customer Reviews ### ⭐⭐⭐⭐⭐ V1 Volcano & V6 banger lil kit(12V, use original probes if needed 24V) *by F***M on March 11, 2020* I mainly got this for the all metal heat break and the volcano end. Good news for me, all 3 included breaks were all metal. Upon closer inspection, one of them had a much better visual finish. Ran some steelwool and cotton twine with polishing compund through it b4 initial install. The other two have minor scuff marks on inside, might buff out, haven't needed them yet. Been printing with it for over a month and so far zero issues(hence why I haven't needed the other 2). No clogging for me, just make sure to tighten everything while HOT. And apply heatsink compound only between nozzle/block and heat break/heatsink. None between break and block. Basically you want heat escaping the block towards the nozzle not the heat break but the heat that does go up should escape the break through the heatsink as quick as possible. Hope that helps. I didn't use ANY other other hardware from the kit on my ender 3. Just heatsink, throat and block(worth the money). Ender probes just fit(at least in the volcano block they do, didn't use the shorty) and fans get adapted to whatever mount used. My setup went into a direct drive orientation(BMG/Volcano/pancake stepper from Amazon) and so so glad I did. Swapping fillament is a breeze now, print quality improved, stringing is all but gone, using much much lower hotend temp. (From MAX 260/270 on PETG to 230). I fitted a sock from B-GOOD(the V1 is needed for this kit) and it fits nice and snug. I priced out individual parts since i only needed so little from this kit, but even so this was a hard to beat value and everything just fit, I didn't have to worry about ordering incompatible parts. ### ⭐⭐⭐⭐ Very good value. *by N***. on March 12, 2022* I didn't buy this kit for the heat break they are pretty bad and this is why im giving it a 4 star. If you are buying this for the all metal heat break then this is not for you but paired with a good heat break this works really well with alil tinkering. I figured out the reason everyone is having so much problems with jams and clogs its simple really. These heat breaks are actually 3 different parts the top thread a pipe in the middle and threads on the bottom pressed together. Mine actually has about a 1/16" gap so if your using these print slow and retract very little then buy a good quality heat break. Also the thermistor attached to the hotend was over tightened and causing a short i just used a larger piece of heatshrink spread the wires shrinked it then just a hole for the bolt hope this helps. The attached pics are with all there parts with bad heat breaks extrusions were kinda all of the place sometime to little sometimes to much printed at 50mm/s with a slower print better settings you should be ok. keep printing ### ⭐⭐⭐⭐⭐ Good Value *by P***E on March 4, 2019* >You purchased this item on August 14, 2018 Many months in, it prints like a charm. I print in PETG with no issues aside from user error. -10 month update: Haven't found an excuse to use the Volcano yet, still on my first nozzle. I've put 5kg of filament through this so far (mostly PETG, some PLA). Still going good! Pros: It's an inexpensive E3D V6 clone. Same dimensions. Comes with standard AND Volcano-type heat blocks Comes with a few extra nozzles of varying sizes for both blocks Cons: There's ONE all-metal heatbreak I thought each one was all-metal. TL;DR: It's cheap and prints well, and has the volcano block, which is cool, but I haven't used it. If you don't have a specific reason, get a clone without the volcano block. (updated for more info and new thoughts) April 2020: still using this set. --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.hr/products/67799433-kee-pang-all-metal-j-head-v6-hotend-kit-5](https://www.desertcart.hr/products/67799433-kee-pang-all-metal-j-head-v6-hotend-kit-5) --- *Product available on Desertcart Croatia* *Store origin: HR* *Last updated: 2026-05-18*