Super Lube 97008 Silicone Lubricating Brake Grease with PTFE, 8 oz Tube, Translucent White

I use this primarily on several different 3D printers to keep everything greased up and running. Seems to work OK on rails and other friction points even in the hot enclosure. This tube will probably last me decades.

Pay the extra money and get this instead of the Sil-glyde because this grease is thicker and doesn't stink. With 8oz it should last you a very long time. There is no difference between Yamalube and Super lube if you work on Yamaha bikes.

I bought this 5 1/2 years ago (12/30/17) here for $10.77. What is it now, $20? I doubt I'd give it five stars if I bought it now. But it's been very useful to have it in the house. I've used it 20 times and probably more. I have plenty of grease in the garage but the garage isn't attached my house and it can be hard to get to stuff sometimes in the morass of the garage. I just used it for its dielectric properties on the circuit board of an old remote control after cleaning off corrosion with diluted rubbing alcohol. I applied a very thin coating of the grease except where the button contacts are. The remote is for a 30 year old Philips CD player (CD840) that I cherish, but hadn't used for a couple years. (It was a miracle that I was able to pry the remote apart without destroying it since I discovered it had been permanently glued together by the manufacturer.) I looked here for comments on using the grease for its dielectric properties. I have extra packets of dielectric grease that came with car parts and I have a small tube of it too. But I see this grease lists its "dielectric strength" at 400. Looking at Wikipedia, and other, that should be very good to use for insulating purposes. I looked at a good bunch of the straight-up dielectric grease products (typically sold in about 7 to 10 grams tubes), and none give their dielectric strength. In the Q&A for this product, responders said they wouldn't use it for auto electrical, and I agreed when I read it. This here grease can seem a little runny (which has its advantages for lubricating some things). But now that I've smeared it lightly on a circuit board to prevent corrosion, and the remote has been restored to its old glory, I believe it will perform great for most dielectric uses.

Great - got quickly too

I have used this on several slide pins on cars and motorcycles and it works great. Fixed a major binding issue on the front of my bike's caliper, as well as lubed up the brake and clutch pivot points. Great stuff to have around the house as well, use on any plumbing washers or o-rings. It is safe for drinking water (so long as you don't get your greasy fingers from working on the car in it). My tube does say H1 Certified on it, but was purchased in 2018, so I am guessing something has changed with the formula (are people ordering the "new" version of it?). This tube is huge and will last me a long, long time. Update: Went to use it today and found that the lube had formed an almost liquid consistency when I first opened it. It had been stored cap down, and when I opened it up, a thick liquid came out. It was maybe a teaspoon worth, then it was just the normal thicker lube, but be aware of this. Maybe need to shake it up a bit if it has been sitting out in the heat unused for a long time. Mine was in the garage, probably 90°F in the garage, tube was not used for well over a month.

The stuff works great

Bought for brake calipers. Nearly a year later, it's been working great. No sign of pin boot degradation or other issues.

Buen producto!

Lots of uses, you can apply this on top of brake pads to help prevent squeal, you can apply on top of rotor screws to help prevent corrosion, to the brake sliding pins etc.... Safe for naked human handling.

Funktioniert einwandfrei.

Sehr Vielseitig einsetzbar, Batteriepol-Schutzfett Kaffeemaschine O-Ringe oder auch Führungsbolzen von schwimmenden Bremssätteln. Schmiermittel in Türscharnieren. Billiger als Liqui Moly und dank der Teflon Zugabe wohl sogar noch bessere Schmiereigenschaften. Zusammengefasst Herstellerseite: Mechanische Teile: Schmierung von Scharnieren, Rollen, Schubladen, Gelenken und mechanischen Bauteilen wie Zahnrädern oder Dichtringen. Gummi und Kunststoff: Pflege und Schutz von Gummiteilen, Dichtungen (O-Ringe), Dichtleisten und Kunststoffprofilen, um sie geschmeidig zu halten und das Anhaften zu verhindern. Fahrzeugwartung: Schmierung von Bremskolben und -führungen, Schutz von elektrischen Steckverbindungen und Pflege von Gummiteilen, z. B. Türdichtungen. Haushalt und Sanitär: Schmierung von Armaturen, Ventilen und Dichtungen, Montagehilfe für Hart-Plastik-Rohre und Pflege von Kaffeevollautomaten (Brühgruppen, Dichtungen). Elektronik und Elektrik: Isolierung elektrischer Verbindungen gegen Feuchtigkeit, Schutz vor Korrosion und Verhinderung von Kriechströmen oder Funkenüberschlägen. Aquaristik: Schmierung von Dichtungen an Außenfiltern, Tauchpumpen und anderen Geräten.

Way underestimated the size of the tube, this is a lifetime supply of grease unless you slather tons of stuff daily. Very good quality silicone grease, comes out in a nice "tube" like toothpaste making transfer onto an applicator very easy.

Gerne wieder