Heavy Duty 5 Tier Metal Storage Shelves

I ordered 3 sets to try to get my box room under some sort of control. They have done this, so I'm happy.They are fairly simple to assemble, but you'll need plenty of room to do it. They go together easily and, as long as you tighten the fastenings by tapping them seriously, they then stay together as you assemble them. It's MUCH easier with two people. I didn't have a rubber mallet, so used a 2-foot length of 32 mm broom stale ... it did the job.They are very adequate for a domestic setting so will be absolutely fine for box room/shed/garage etc. They might even be useful in a shop/indoor market stall provided you aren't selling high-end stuff. The metal is fairly thin and twists easily, but when assembled, the units are quite rigid. Although the MDF is quite thin, the supports under the boards give plenty of stiffness, so sagging won't be a problem.They are designed for a 10-hole spacing to give evenly-spaced shelves. I used a 9-hole spacing between the shelves which gives another space underneath, so I've got the area of floor plus 5 shelves ... plenty for my needs. This spacing (about 300 mm or 1 foot) is quite sufficient for most plastic storage boxes/document boxes etc. Of course, you don't need to have equally-spaced shelves, so you have a degree of flexibility. The one thing you DON'T want is a very large space between the floor and the bottom shelf; it's the shelves that add rigidity to the unit. This is a very important consideration.They come with all the bits and pieces to connect 2 or more sets together, screws to attach to a wall and even a pair of handling gloves.For the price, they cannot be beaten! Highly recommended.

I have now got 5 of these racks, they are really easy to assemble, great weight capacity for the price. Would definitely recommend.

When you open the box you'll have doubts as the frame is lightweight and the shelves themselves are not thick at all. However, as the simple construction begins its starts to take shape and becomes sturdier with each insert. The shelves are well supported so there shouldn't be any bend that I've noticed in plastic units over time.Construction is easy once you take a little time to read the instructions. It comes with safety gloves although I didn't use them.They look good too and you have complete flexibility where you position each shelf.Overall, satisfied given the price and overall appearance.I bought 2 x 90mm and 1 x 120mm.

First I wasn’t expect anything special or good for that price, however I was very pleasantly surprised. From the very beginning there were plenty of nice things.Firstly – the gloves were included, so you don’t need to do it with your bare hands, secondly – a hint to use a rubber hammer (this suggestion was stated in the instructions booklet, but I didn’t follow it up and assembled it all together without it, however I have to admit, that if I would listened to that, the entire process would be much easier).Entire assemble process is explained in the manual booklet, which is full of diagrams with the step by step instructions, so you don’t need to be an engineer to understand it. After putting it all together I have very nice, sturdy garage shelves, which I could adjust to my needs. I truly recommend this product.

Easy to assembe . Shelf could be stronger

Ordered two of these for my garage. On opening the first box I was disappointed that the steelwork and the shelves appeared very lightweight and flexible. I left the second box sealed as I fully expected to be returning both. However, once constructed, both the frame and the shelving become surprisingly sturdy and stable.Both are now assembled and carrying substantial loads, albeit mostly in boxes which spread the weight. I suspect the shelves would not cope so well with point loads. That said, they work for me and are very good value for the price paid. The instructions suggest using a rubber hammer during assembly, a suggestion I definitely endorse.

Good quality, easy to assemble and sturdy. Once loaded it is very sturdy and it also comes with wall plugs and screws with holes to attach it to a wall if needed.

BUYERS BEWARE!!While the product details claims that shelves hold up to a 175KG, in my experience when I loaded it with a very modest 20-30kg, each and every single one of the shelves bent. I even made sure they were spread evenly on the shelves so there are weight focused spots.The frame structure by itself while a bit flimsy, it does the job, however, I'm guessing due to the thickness of the MDF boards. I've followed the assembly instructions religiously, they were fairly easy to assemble, too bad the shelves themselves were not great quality.I've reached out to the seller (and so did Amazon) numerous times, they didn't even bother to reply back. If you have any issues with your items, don't count on them. Also Amazon is unable to help because it's both sold by and dispatched by a third party seller.So just keep this in mind, when you order this that this is a bit of a pot luck. Good luck