HOME MASTER HARDWARE 12 inch x 8 inch Heavy Duty Shelf Brackets, Load Capacity: 600lb, Black Metal 90 Degree Supports for Shelves 10-Pack, Wall Mounted L Bracket for Floating Shelving with Screws

I was concerned about some of the negative points on other reviews, but the seller has obviously paid attention and resolved any concerns. The brackets I received are very nicely finished with a heavy coating. They were packed with protective end caps and layered between cardboard so none of the brackets had any marks on them even though the shipping box showed signs of rough handling. The support bar is fixed into slots and welded from the back side so the front side is smooth and clean. These are very nice, strong brackets and look nice enough for almost any location. The screw mounting holes on my brackets were offset from the support bar and I installed them easily with an extended driver bit for my drill. The included screws are more than sufficient for mounting through drywall into studs. The shelf screws were a little long for me because I only used 15/32 plywood shelving, so I added washers. But they will be fine for 3/4" shelf boards.

Unlike other brands that I had to return, these match the picture. The holes on the shorter leg which goes in the vertical orientation are centered so that they can go into the center of a wall stud. They are well constructed with good powder coating.

I am pretty impressed with the quality of the brackets and sturdiness. I ended up using 3 brackets to mount on a 16” wide maple slab top (5’ long) which in itself weighs about 30lbs+. Let me tell you what, those little guys are solid. I would definitely recommend to drill into the studs, especially if you are mounting a heavier or wider shelf. Comes with all hardware and anchors if needed. 10/10!

Very sturdy. Glad I bought it.

Used them with my hardwood shelves. I found them easy to install and they are pretty strong. I did not use the screws that came with it, they didn't look strong enough or long enough to support the kind of weight I was going to put on this shelf. I doubt they could support books, but definitely trinkets and stuff.

These brackets are great and serve my needs for building shelves in my garage. Also, when I opened the package I was surprise to find out that it included the screws needed to mount the shelves.

I bought these brackets to make these cedar shelves and the work great. Very solid and seem like they can hold a lot of weight. They look beautiful and very simple to install. Will be buying these again

Strong heavy duty brackets.

The metal strips are around 1.5 mm thick of width 15 mm (approx.). The diagonal support joining the angle/bend left welds in a few pieces. Good for light weight 5-7 kg loads. The bracket bent for one shelf, load approx. 5-6 load (books)- the diagonal support in one of the two brackets installed in this shelf was detached when received by me. Good for light weight loads.

Strong and look great - finished a kitchette with these to make shelves as there wasn’t enough headroom for upper cabinets. Strong enough for one set of 3 to hold the microwave & one set of 3 to hold the dishes. Very happy!

Horrible product... It's very weak and came out inas soon as loaded rack within 15 mins of install. Broke many items placed on rack and also got bent and broken. Do not buy.

Very sturdy and of good quality !

Good quality, nice you get 2 different length screws