B-60539 Impact Gold #2 Square Recess 2″ Power Bit, 15/Pk

Best square bits I’ve ever used, they last a very long time compared to any other brand I’ve used.

Good stuff. I was happy to find them again as they are not carried by the big box store I had found them in the past. These are just right in terms of fracture toughness for impact drive tools. The harder ones snap, the softer ones get rounded off and poor engagement with screws. I also use the philips #2 heads, and the torx tips in the Makita Impact Gold series. A 15 pack might be overkill because the 2 I had previously lasted for years.

Every screw on our camper is #2 square. These are exactly what I needed.

Great bit use it for work everyday

I bought these because I’ve had good luck with all other makita bits but these ones had play in all of them compared to the other bits I normally use when commercial roofing, couldn’t take out a single screw with them because the couple I tried just rounded themselves off. Definitely not a fan of these ones.

I bought them because I figured makitas would be good, but I found them to be very cumbersome. The problem seems to be that there is no beveling of any kind on the square bit end, which makes it much more difficult for the square to fall into the fitting. In other words, it needs to be in almost perfect alignment with the hole or it will not mate. It also has a really hard time remaining in the fitting hole. It falls out whenever the driver is not almost perfectly aligned with the screw or bolt as well. They really phoned it in on this bit.

Very few screws driven (less than 20 3-3/8" X#10) in 2X yellow pine treated lumber before tip 'rounds' off and slips in square drive socket.

Excellent buy for the money. Tend to go through a lot of bits with newbies in construction, these last.

Great value and made in Japan too!!!

Tight fit

I've been using the same bit for nearly 5 months, one of the best bits I've used. only complaint is that they're a bit short

Livraison rapide