Question 1

Is this product able to be welded through?

Accepted Answer

Hello:
The extreme heat involved in the welding process will disintegrate Rust Bullet, and most other coatings. If welding is necessary after Rust Bullet has already been applied, then it should be removed prior to welding and reapplied afterward. After curing, all Rust Bullet coatings have a service temperature of 314F (157C) continuous and can tolerate maximum temperatures up to 662F (350C) for up to 72 hours.

Question 2

does it come in white?

Accepted Answer

Rust Bullet only comes in silver but had a very durable white top coat.  I have used both the black and red top coat and it is very durable.

Question 3

What kind of paint would use for finish coat.

Accepted Answer

All depends on what your painting. You could go on the cheap end and simply use rustoluem paints, or buy professional autobody primers and topcoats. I plan to topcoat with epoxy primer from a HVLP paint gun and then topcoat with the color I plan to paint the car i used the rust bullet on. I only used the paint on areas that are mostly hidden after final assembly, but want everything the same color.

Question 4

no se reduce la pintura

Accepted Answer

It is not recommended to thin Rust Bullet Coatings. If you intend to spray with an HVLP, you can use a 2.0 tip. Rust Bullet is ready to use right from the can, and you would want to adjust your equipment as opposed to adjusting the coating. Once thinned, it in not the same formulation and will not work the same as when it was made. You can use Rust Bullet Solvent or Xylene for clean-up of equipment.

No se recomienda diluir los recubrimientos de bala de óxido. Si tiene la intención de rociar con un HVLP, puede usar una punta 2.0. Rust Bullet está listo para usar directamente desde la lata, y usted querrá ajustar su equipo en lugar de ajustar el recubrimiento. Una vez diluido, no tiene la misma formulación y no funcionará igual que cuando se hizo. Puede usar solvente de bala de óxido o xileno para limpiar el equipo.

- RUST BULLET Automotive - Metallic Gray - 5 Gallon - Rust Inhibitor & Protective Coating for Cars, Trucks, & Metal Surfaces, UV Resistant, No Topcoat Needed

Details

Details

Description

Common Questions