Temtop Smart Air Quality Monitor Indoor Home Air Testing for AQI, PM2.5, Formaldehyde and VOCs with WiFi Connection and Remote Monitoring via App,M10i

Great for making sure 3d printing is not mucking up the air. It’s sensitive enough to show high levels when alcohol breath is the room. I’ve had it for several months and it’s still working.

I've tried many times to connect it to my wifi. I used a 2.5Ghz, and put in everything through the app but get a configuration failed. Their website even shows the same issues with the product. Either they do not care about their customers or they made this design in the worst way possible. One review points out that there's no connection to the device outside of wifi so there's no way for the device to get the wifi password... Typically products like this have their own network that you get on then give the password to it, but this is not the case. It's simply a non-functional device. The sensors seem to work but require you to first calibrate it by putting it outside. I hope you do not have a contaminated outside area! Otherwise this method is totally faulty. I suppose it also re-calibrates overtime so you may need to periodically leave it outside to adjust. Stupidly too the battery life is only 3 hours but you need to leave it out for 6 so I hope you have an extension cord or a battery backup. Device is poorly designed and thought out. Suggest buying something else. Too bad that it has the broadest set of sensors on the market for a good price. But you pay for what you get in this case. So I have to return it and pass on it. My suggestions to the manufacturer is to make sure the calibration process is done in factory or it's not worth anyone's time since it could be faulty or done wrong. The WIFI needs to connect without any issues. The methodology for this product is totally wrong. Battery life needs to be >> than the calibration process which shouldn't even exist. 3hrs is not long enough. For essentially a paper weight it could easily be heavier and have a battery that lasts about a week.

I'm using this unit in a home woodshop primarily to keep an eye on particulate matter from sanding and cutting, VOCs from finishing materials, and to monitor how well my dust collection and filters are working. Important to note, this is not an industrial hygiene tool. I find it useful and accurate to assess trends, but am still using ventilation and PPE. I have found it to be pretty responsive in the way that I would expect, spiking shortly after sanding and lingering or dropping depending on distance from the sensor and whether dust collection is running. I also have a second one, and side by side comparisons are very reasonable (some variance is normal in any measurement, but PM2.5 is usually within 1-2 ug/m3 of each other for example). The WiFi capability is very nice for remote measurements, and the app is great about allowing you to download the raw data for recording or analyzing further. Battery life is okay, but you really don't want to have to run it unplugged for more than an hour or so. It can last a few hours but if it's somewhere unplugged that long it usually means I've forgotten about it. One thing to note is that the HCHO and VOC sensors are hyper-sensitive to alcohol vapors, so if you are using rubbing alcohol or open a can of shellac anywhere near it the readings will skyrocket and remain saturated until you do several complete air changes or move the sensor. Overall I find it really useful, with reasonable expectations that should be the case for any analytical measurement tool.

The sensor seems pretty good but the WiFi connectivity and the app that I paid for with this model need work. I had repeated issues with the sensor losing connection to WiFi after some wifi outages. I had to reboot the router each time to fix the issue. Everything else came back fine on my network without the need for intervention. After the app update (Sep 2021), everything worked fine but one day the app stopped seeing my sensor. It locks upon start-up and says loading. When I press the back button the up comes up but does not see the sensor.

I am reviewing the M10i WiFi enabled unit. There's a lot to like about this monitor. It's reasonably accurate and tracks my outdoor PurpleAir unit when placed near it. The reading changes very rapidly with changing environment. This is especially useful when trying to track down potential air quality problems in your home. The reading can change over a wide range in a few seconds to match the local environment. This was useful to track down unusually high readings to an ultrasonic humidifier in one of the bedrooms (puts out billions of microscopic water droplets which will fool an PM2.5 sensor). Once you get the WiFi connection to work it is very stable and the app provides useful 24 hour plots of all 4 values in user chosen intervals down to every 5 minutes. Once I got the WiFi working I've had no problems with the app and data it provides. All that being said, this is one of the worst implementations of WiFi setup of any device I've ever owned. It is extremely tricky and difficult to get the unit to connect to your WiFi network. Read the review from chromodynamica as a helpful starting point. I had to turn off all mesh routers except the one I was using to connect to. I had to go into router settings and turn off all 5GHz radios. On the 2.4 GHz radio I had to change the encryption from WPA2-personal to "Open". Furthermore you may have to try an unsuccessful automatic connection first to make sure the device connects to bluetooth (you will know when you see the device in your bluetooth list). All this to get your WiFi password into the device. Once the device connects your can return all your router settings and turn on all your mesh routers with no problem. If this sounds like standing on your head and rubbing your stomach it definitely feels that way. I STRONGLY discourage anyone from buying the WiFi enabled version unless your are very comfortable with changing and experimenting with your router settings or very patient to work with TemTop's tech support. You've been warned!

I really like this product. The unboxing was a lot of fun and it’s super simple to read and set up. I only have a couple of issues: The first issue is with the connectivity to the WiFi. It keeps disconnecting and then I can’t remember how to try and reconnect without removing the device and setting it up again. I tried searching for the issue online and in their help guide but was unable to find an answer. The second issue is with the lack of reading material provided. I wish there was some more easy reading material on why certain readings are bad/good, what each reading means and likely causes. To me, these are easy fixes that shouldn’t cost much money to improve but will make a big difference in the user experience. maybe I’m just missing easy solutions but, as it stands, that’s my opinion of the product.

my review is for M10i [monitors AQI, PM2.5, HCOC, TVOC (with WiFi)] This meter helped me provide critical data to my landlord, doctors, city about a difficult situation where my neighbors' illicit activity severely impacted my health, but was otherwise difficult to quantify and verify. It's been invaluable. I use Temtop's app on an iPhone, and have used three different WiFi setups. I 100% recommend reaching out to the manufacturer's team when you encounter difficulty connecting, they have been exceptionally helpful, and wow, I ended up with a lot of questions, and they have been consistently wonderful in helping me find the solutions I desperately needed. It can take time to attach this meter to WiFi, but here is what I learned: • have all your phone's permissions set allow the Temtop app to do what it needs to do • have set your WiFi network & router permissions set allow this meter to connect to your 2.4 GHz WiFi • Use 2.4 GHz WiFi, not 5 GHz WiFi. Temporarily hide or disable everything except 2.4 GHz. Call your ISP for help if needed, and permanently blended WiFi routers won't work. • Temtop's amazing support folks recommended that I temporarily disable all but one of my mesh routers on my network while I connected my meter to my WiFi. This worked! Meter automatically re-connects to WiFi after either meter or router are restarted. Temtop's app exports the M10i meter's numerical data as an excel spreadsheet if you ask it to :) The most frequent output is 1 reading per minute. The app's graphs are wonderful and you can zoom in to time/amplitude easily. It's a very helpful and cost-efficient meter, and has made my life significantly safer, given the situation I needed to be able to monitor.

Cannot get the app to work completely. Initially, I put in my login email and password and then got linked to their website that was trying to sell me lots of this and that. Couldnt get out of that link. So, exited the app, then tried to login again. TemTop system did not recognize the login. I did the login procedure again, and this time did not get past the login page. Ditto for 3 more tries. Eventually, after logging in with my Apple account, the app allowed me to establish an account and run setup. The app, which is apparently 5 years old, established a WiFi connection, but would not set up "configuration" no matter how many times I tried: CONFIGURATION FAILED was always the return message. I emailed Temtop support and got back something strange: It is apparently required that the user must go to his/her router setup (192.168.1.1) and reset some configuration parameters! Im not doing that. I have many 2.4GHz devices that have never required a router reconfiguration. THAT is absurd. The only reason I bought this device was to be able to access my home's indoor AQI from afar (WiFi). The current price with coupon is UNDER half of what I paid for it 5 months ago ($135 with tax). Wonder why? With an internet search, you will find out what happened to many others. In the last few days, I got an offer from the manufacturer for a full refund. I took it, and the refund has appeared on my credit card statement. I'd say this was an appropriate response by a responsible manufacturer. I didnt expect it, and I thank them.

I can't tell how accurate it is - but it does react to smoke, fragrances (like essential oils), and so on. I like it. I did not connect it to Wifi and I am not sure I ever will - the app on the App Store looks super sketchy - the title is not even in English. Maybe I should have bought the cheaper (no Wifi) model. But I am not complaining, this thing seems to work.

The sensor looks great and easy to setup. The displayed numerical values are in the same range as the what the my smart air filter is saying, so I guess they are either both correct and both wrong. It would be nice to have one day battery life, mine runs flat after about 4.5 to 5 hours. It is located near a USB wall charger socket, so it is not much of a problem to charge it.

Very fast

The whole idea of this device is you need to connect it with the App. To add the device, it will require access to your GPS location in order to setup/proceed. After giving access, the app still have issue trying to setup/link to my Wi-Fi. Could have been designed better for this price. I would return

It's probably okay if you have nothing else and just want an idea of what is going on as far as being supper accurate I have my doubts but I'd say it's close enough to tell if it's safe or not but it's nice seems well built didn't come with it's own power adapter which was a little annoying. App is kinda annoying doesn't like mutiple phones on it and can be finicky at times but when it decides to work it's good. Don't really need the app unless you wanna store data