Question 1

How many square foot  the gallon cover?

Accepted Answer

I had an older ipe deck ~ 16 X 46 ft or ~ 740sq ft. maybe a little more porousthan new after stripping older finish. 3 gallons just did it with some areas stillnot fully penetrated. I have a fourth gallon for touch up which seems quite easy.I'm very satisfied with the rich color and grain exposure, very nice and went on easily with a roller and brush touch up. Best ipe finish I've tiried. May use it on someteak on my sail boat.

Question 2

Can this be applied over Thompsons Water seal?

Accepted Answer

I'm not sure what type of wood you have, but I'm going to assume you have Ipe which is dense and doesn't penetrate well to begin with. I would not recommend applying the Ipe oil over Thompsons Water Seal. It's likely to just sit on top of the water seal and not be able to penetrate the wood. If the oil doesn't soak into the wood, it won't dry. When the oil stays wet too long it gets sticky and dust sticks on the surface. You end up with a big mess.

To give you an example, we have an area on our deck that is under a large overhang. It doesn't get much sun and therefore doesn't need to be re-oiled as frequently. Our painter power washed this area and let it dry. Then put another coat of the Ipe oil over an existing coat of Ipe oil. It took months for the oil to dry and because of the wind and all that naturally blows around outside, many particles stuck to the oil and it ended up looking dirty and filmy.

Question 3

What's the difference between the 100 and 250 VOC formula?

Accepted Answer

VOC is for "volatile organic compounds", which is a measure of how much solvent/toxin is released into the air as it dries. The maximum allowed in flat/latex is 250 g per liter, and for other paints, the federal cap is 380 g/l. The lower the VOC number, the better for your health. A con of using lower VOC paints is that they may not be as long lasting or of lower quality than higher VOC paints.

Question 4

Can the ipe oil be used on eucalyptus furniture? if so, can it be applied over stain?

Accepted Answer

Eucalyptus wood works just fine with this oil. Cannot be used on wood previously varnished or Polyeurethaned. Should work absorbing into wood with weathered oil base stain-- we'd recommend a test area be done first to confirm uniformity.

ASIN	B008ZUQMHC
Base Material	Oil
Best Sellers Rank	#35,120 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #81 in Household Stains
Brand Name	DeckWise
Coating Description	Oil-based
Color	Brown
Compatible Material	Wood
Container Type	Can
Coverage	covers up to 200 sq. ft. per gallon
Customer Reviews	4.7 4.7 out of 5 stars (697)
Finish Types	Oil-based
Liquid Volume	1 gallons
Manufacturer	DeckWise
Manufacturer Part Number	IO-2-GAL-PK
Material Type	Oil Based
Model Name	DW020999
Model Number	DW020999
Number of Items	2
Opacity	Semi-Transparent
Paint Type	Oil
Recommended Uses For Product	exterior
Size	2 gallons
Surface Recommendation	Decks, Fence, Railings
UPC	812637020999
Unit Count	256 Fluid Ounces
Warranty Type	Limited

Ipe Oil Hardwood Deck Semi-Transparent 250 VOC Natural Finish (Pack of 2, 1-Gallon Each)

Details

Details

Description

Specifications

Common Questions