16GB KIT (2x8GB) DDR4 3200MHz (PC4-3200AA) PC4-25600 UDIMM Desktop RAM – 288-Pin 1.2V CL22 Non-ECC Unbuffered DIMM Memory Module Upgrade

Before you spend money on RAM, go to the maker of your motherboard and look at their QVL information. (The QVL lists all the specific ram that was used to test the motherboard. It is the ram that is guaranteed to work with the motherboard, because it was tested by the motherboard manufacturer and it worked.) I missed that step, and found out the expensive painful lesson that four sticks of RAM may not be supported at the frequency listed on the RAM module. My motherboard has a 4 x DIMM, Max. 128GB, DDR4 4400(O.C) capacity so I felt safe going with 3200 MHz as it was the recommended speed for my processor. I bought two sticks of (8 GB) for a total of 16 GB, and it ran perfectly at 3200 MHz. A few weeks later, I bought a second set of identical RAM (Same manufacturer, date code, frequency, capacity, and CAS latency) to double my RAM to 32 GB. When I put the second set in to fully populate all four slots with (8 GB) each, The computer refused to boot and forced me to downgrade the 3200 MHz listed RAM to a maximum of 2400 MHz. After much searching, I was directed to the QVL information for my motherboard. When I reviewed the information, the fastest RAM speed my motherboard would support with all slots filled was 2800 MHz. As it turned out, most of those were too expensive for my budget. I've past the return window for the first set and the window for the second set is just days away. So now I sit thinking about the following: Do I run only two (8 GB) sticks at the higher frequency of (3200 MHz)? Do I lower the frequency to (2400 MHz) to run all four (8 GB) sticks? Do I scrap all four (8 GB) sticks and buy two (16 GB) sticks at (3200 MHz)? Don't make my mistake, buy the higher capacity up front and save yourself headaches down the line if you plan to run high speed RAM or want to overclock it. ------------------------------------- UPDATE ------------------------------------- I took the time to contact the manufacturer of the ram, and to my surprise after talking through the whole QVL debacle they extended me a one time courtesy of sending me 2 sticks of 16 GB DDR4 3200MHz PC4-25600 CL16 ram. They sent it to me via USPS and allowed me to test the new memory before deciding which ram to send back. The whole process from first contact to my returning the old ram took about 10 days, but during that time the only down time I had on my system was the 5 minutes it took to swap out the 4x8 and replace it with the 2x16. I couldn't be happier with the customer service department of the ram manufacturer. The two sticks of 16 GB ram are running at 3200 MHz with the following timings of 16,18,18,18,38,73. Again, I can't stress this enough. CHECK THE QVL INFO ON YOUR MOTHERBOARD. It will save you countless headaches post build.

OPEN BIOS AT START (DELETE OR f2 key) THEN CHANGE DRAM VOLTAGE TO 1.25V (ASSIGN CHANGE TO CORRECT SLOT) Then, CHANGE 3200MHZ TO 3333MHZ GETS U FASTER RAM, NO CRASHES, NO SHORTED CIRCUITRY: GREAT PRODUCT.

These fit with perfect compatibility into my two 2025 HP Pavilion desktops to increase their memory capacity.

Firstly, this is a great pair of DDR4 DIMMs. 3,200 MHz with CAS latency of 16 at this price is great! My only complaint is that when I activated the XMP profile, it moved the voltage to 1.35 (as stated in the product title), but that voltage was way too high for this RAM and I was getting RAM-related BSODs. But as soon as I dropped the voltage on it, it worked out well. I will continue using this in the future. Will buy more if I need. I'll just have to remember to drop the voltage. If you don't feel comfortable adjusting the voltage on your RAM. Then just set the speed to 3200 and the CAS to 16-18-18-38-56 and leave the voltage on auto. Feel free to comment on this to correct me or to ask for clarification.

Activated xmp and it automatically changed to 3200mhz and 1.35 volts as specified with a MSI MGP Gaming + mobo and a 9700K. If you want affordable and high quality ram I would highly recommend this product. I will definitely be buying more in the future.

Armé una PC lo más económicamente posible para edición de fotografía y no he tenido problema hasta con las memorias. Si eres un usuario que quiere algo vistoso, deberías buscar algo más, ya que son memorias que son bastante simples y no se van a notar en una pc gamer.

Bastante buena opción costo-beneficio/calidad-precio recomendado

ASRock x570 pro4 CPU Ryzen5 2600 Just plug in dual channel position and set the speed @ 3200 , get memory benchmark score 2228 read 18279 and write 8746

商品の説明に書かれている通り、1.35V動作でDDR4-3200です。 定格だとDDR4-2400なので注意してください。 因みに、シングルランク品です。 4年間使っていますが、動作は安定していて満足しています。

La memoria va bien es un poco más barata pero va estupendamente

works as said 3200mhz

Execelentes muy buenas las recomiendo calidad precio

Ottimo il prezzo un po' caro ma c'è di peggio in giro le consiglio