Hon&Guan 8 Inch Flexible Duct, 16 ft Air Hose with 2 Duct Clamps

Awesome! This is insulated so condensation doesn’t build up when venting outside into colder air. Our washer and dryer is upstairs and the vent go up the wall into our attic then over our master bedroom’s bathroom then vents outside. Well our old ductwork wasn’t insulated so during winter months condensation would apparently build up in duct work without our knowledge. Long story short one morning my wife was brushing her teeth and all the sudden the water that held been building up in duct in attic broke through the cheap aluminum vent and the drywall on ceiling then water came down into her sink. Lucky me not on her head but close! We had no idea condensation was building up in the dryer vent. We get it cleaned out professionally too every six month as we do tons of laundry with 5 kids! So the condensation had been building up fast! We live in a newer home over with over 4000 square feet but we never go into attic so would have never known old duct work was tearing from weight of water. Maybe it ripped from cleanings overtime Idk but point is this insulation duct seems to do the trick as you can just feel the difference in quality. It’s sturdy! Just so much better than the old tin duct work that always tears and rips when you try to install it with the metal clamp and the little screw. This insulated duct stays in tact and goes slides right on doesn’t tear. Still goes on with metal clamp and screw but because it’s a strong plastic or pvc covering whatever it is it goes on smoothly! By the way State Farm didn’t cover the $4,000 plus damage to roof and repairs to duct work as they said this was a maintenance issue! And yes we presented them with years worth of receipts showing ducts cleaning every 6 months still denied it so I paid out of pocket. Now only $4,000 grand some may say but for someone who never had a claim in over 15 years on house or multiple cars you’d think State Farm would of tossed me a bone here but nope. I know what’s all this have to do with simple review of a 20 dollar piece of duct tubbing! If your on the fence of buying the old school cheap tin duct for your dryer vs dishing out few more bucks for the insulation duct get the insulated duct! It will save you thousands of dollars potentially! If you have the condensation problems with dryer venting outside. Excellent duct work just buy this. Was delivered same day when I had to have old one replaced. Well worth it and it easier to clean doesn’t tear when taking on and off etc. Buy it!

I used this to replace damaged heat vents in an RV. As it's rated for dryers I felt it could handle the temperature of an RV furnace. it is fairly flexible and was easy to snake through confined spaces. The rubber coating on the outside should make this much more durable the the flimsy foil face plastic vent material. Easy to handle and install and so far works great.

It works good probably better for a gas dryer I use it for my ac and it does seem to keep it a lot cooler but you will still feel heat come off the hose.

The ends are a little tight, but was able to attach everything to my dryer and the vent.

Very long enough to from outside to my dryer only thing is hole was too small but that was on me

For the price its good but its less durable and heat insulated than the one that came with my ac (white) it radiates 30% more heat than the original but the length is perfect. The wire also bends easily and stays deformed changing the hose orientation

Good product. Quite smooth and full 4" opening when extended. Only about 3.5" if not extended. Some have complained this is hard to install. The trick is to make sure when you cut it that you cut so that the length causes it to extend almost to its limit then leave as much as you can extending from where you cut the wire. That way it is very easy to stretch over the fitting then using your fingernail lever the wire over and keep walking your finger around pressing more and more of the wire on until you have 1 1/2 to 2 1/2 turns on. Then slide up the wide open clamp and tighten. Be sure the clamp is well away from the end when you install the end over the fitting. Maybe 6 to 12 inches. And, make sure the clamp is opened fully. You just don't want it to interfere with the process of first stretching the material over the fitting then levering on the wire. It is a very easy process. If you do it right you don't even need tape. The clamp seals on the wire. By extending the tube you gain smoothness and diameter. It has been a year since I put this on a new dryer and it still looks and performs like new.

Fit perfectly and has held up for blower in a Mastercraft inboard application

De afvoer slang is niet 3 meter maar 2,5 meter

As advertised.

Un producto de buena calidad y fácil de instalar, no se requiere experiencia previa para colocar este ducto en un extractor de aire. Satisfecho son el desempeño de este producto.

Mak renseigné, je suis censée avoir commandé deux tuyaux de diamètre 150 et je me retrouve avec 2 tuyaux diamètre 100 et n est spécifié quand on le commande.

Er zit geen aluminium laag in de binnenkant. Is alleen zwart plastic. Foto klopt dus niet. We hebben andere gekocht.