Pyle Universal Mount Front Rear Camera - Marine Grade Waterproof Built-in Distance Scale Lines Backup Parking/Reverse Assist Cam w/ Night Vision LED Lights 420 TVL Resolution & RCA Output PLCM37FRV

Worked perfectly as a front camera if you follow the diagram (leave green and white wires uncut). If you want it reversed as a backup camera cut the white wire. If you want the scale lines as a backup camera cut the green wire.

If you are trying to mount a forward facing camera on the front if your truck, or car. This IS the camera you are looking for!! Parking Assist, or guide lines- Optional. Reverse image- Optional. The picture is superb. Admittedly, when I first connected it to my television to tinker with it; the image was wavy and downright lousy. I was using a Radio Shack 3.5A 12V power supply for say a cb radio, or the like. I knew the lines was attributed to some sort of feedback from either the power supply, or the television- so I was not that concerned with it. Once I installed it on my truck it worked absolutely great!! I am really happy with it. The other conventional license plate mount camera had a good image, but the image was reversed, and I also was not able to adjust it down enough to be able to see the leading edge if my front bumper. You need that to use as a reference. The camera does not appear to be the most rugged thing around, so I put a blob of rtv silicone around where the wire goes into the housing- just to be on the safe side.. I think it will be fine. It is very small and low profile. You can barely notice it. Check out the pics.... All in all, I'm pretty happy with it. I wanted a camera that I could easily get rid of the guide lines, and the reversed image; and this fit the bill to a tee!! To achieve this- you just leave the three wires(red, white, blue) disconnected from one another.(see stock pics)..

Fuzzy video, low res.

This camera is a bit different than pictured. The camera you will receive is about 1" square and is mounted by a small bracket. It has no LEDs or IR capability, but it does have a pretty good image. If you look at Pyle's website under the model listed for this camera you will see the correct photo, but the description on their site states it has ir capability for nighttime use. This is untrue. The low light capability of this camera is not too bad though. I like the size and the ability to set it up the way you want as far as reverse image or not, grid lines or not. The field of view is probably more like @ 150 degrees than 170 as stated, but it's still pretty good. The image colors are pretty true also (there are no pink trees on the monitor). For the price it's a decent deal. I recommend sealing the lens and housing with silicone to guarantee against moisture infiltration. It says waterproof, but so did the last three cameras I bought and they were in no way even weather resistant. This camera is far superior to the other three of various brands I've used.

Very compact so will fit just about any area. Last one failed in cold weather. Ordered this again 5-29-18, and this one failed in late December, 2018. Obviously there is a premature failure mechanism probably related to low temperatures. I suggest anyone considering this model to consider a more expensive camera, or at a minimum purchasing warranty protection extending to 12 months.

After 8 months of being mounted on the front of a Toyota 4x4, driven off road in dust and rain, it has continued to work perfectly. The camera that I received had a hinged mounting bracket that allows the camera to be aimed where needed. The camera came with very generous cable lengths so that I ended up with quit a bit of extra cable. I am using the Sunnvalleytek 4.3 inch TFT LCD Digital Car Rear View Monitor with 360 swivel stand to view the camera image. As for the complaint of not being a front view camera the instructions are confusing. Turns out that you rotate the image from back to front view on the back of the monitor. The only down side is that you lose the distance lines. I also added a dash mounted switch so I could turn off the camera when it wasn't needed.

Works as described. Nice long wire leads for options such as guide lines or image flip for using as front view camera. Rain and car washes all good.

Pyle PLCM37FRV Universal Mount Optional Front View & Rear View Backup Color CMD Camera with Built-In Distance Scale Line Does not provide front view. There are 3 wires (red, white, and blue) that are used to configure the camera; connecting either the blue and/or white wire to the red wire configure the camera as follows: connect blue wire for mirror image (rear view), and white wire for distance grid. The default "forward view" results from leaving the 3 wires unconnected, or connect the red and white for forward view with distance grid. It would be useful if the camera worked as described in the instructions, but it only works in the following configuration: The camera won't work at all unless the red and blue wire are connected, meaning it only works in mirror (rear view). You may connect all 3 together for mirror (rear) view with distance grid.

Rien a redire LivraisonRapide, et article pas cher Le support est toutefois un peut leger L'image est assez nette même de nuit

PRODUCTO DE SUPER ALTA CALIDAD, CALIDAD DE IMAGEN DEMASIADA ALTA SUPERÓ MIS EXPECTATIVAS, PARA SU PRECIO ES EL MEJOR DEL MERCADO, EXCELENTE PRODUCTO💯💯💯💯

Easy to install. Picture is as expected for a $30 camera

Me ha sacado de muchos apuros, funciona muy bien.

Product says 170° but when installed its only 120° or 140°. Wrong advertisement.