Size:7KG/15.4LB Pail  |  Style:Krytox GPL207 Performance Lubricant Grease Krytox GPL 207 grease is the product of choice in extreme temperature conditions Most petroleum products begin to degrade above 99 degree C (210 degree F) and are too viscous at temperatures just below –18 degree C (0 degree F) Under the D-3336 test conditions of 177 degree C (350 degree F) and 10 000 rpm the majority of competing hydrocarbon lubricants fail in less than 1 000 hr But the general purpose line of Krytox lubricants has been shown to last over 5 000 hr without failure even at an increased temperature of 200 degree C (392 degree F) This extreme condition performance is what distinguishes Krytox performance lubricants from other competing products Krytox GPL 207 grease is cost-effective across a wide range of applications Due to their inert nature Krytox lubricants provide a much longer usable life as compared to typical hydrocarbon oils and greases and the longer usable life allows them to remain for considerable periods of time before needing to be replaced if they are replaced at all That translates to savings over time both by lowering the amount of lubricant purchased and any downtime incurred during re-lubrication Standard Krytox lubricants contain only carbon oxygen and fluorine whereas hydrocarbons contain hydrogen The absence of hydrogen greatly increases the stability of the lubricants and renders them nonflammable with no flash point They will not burn or support combustion even in an environment of 100% liquid or gaseous oxygen Krytox performance lubricants are not only resistant to oxygen but they are also inert to virtually all chemicals used in a variety of industries They are insoluble in most solvents but are soluble in highly fluorinated fluids and some super critical fluids such as CO2 At elevated temperatures and pressures PFPE oils are highly resistant to attack by gaseous and liquid oxygen
D**Y
holy techno-grease batman!
I use this on all O-RINGs in my car, Just enough so the o-ring slips into place instead of getting pinched.I purchased specifically for fuel injector o-rings.Because this grease is not dissolved by fuel/oil like petroleum & silicone lubes are.
R**N
The real deal.
Got some to do some WAY overdue maintenance on my 3D printer, and didn't have the little tubes it came with.Grabbed this as I figure if I'm gonna do it, I go all the way. These devices need precision movement, and I wasn't going to take chances seeing as this device had been unused and unmaintained for over a year.Put on a pair of nitrile gloves, and worked this all into the threads and rods for the bot movement. Ran off a print with some fairly precise movement requirement and it came out perfecty, the print heads slide like butter over the rails and the Z-axis movement with the threaded rod was like new.No complaints at all, and this tube should last me a couple of years at least of maintenence.
A**R
The best teflon grease available
Put it on almost anything, comes is a bunch of different viscosities. Would use it more if it wasn't so expensive. But you pay for the quality.
J**M
Good things come in small packages
I use this for car mechanics. Great for lubing disc break pads. High heat does not seem to effect it like traditional lubes.
D**D
Great for fishing reels
Works great on reels
N**E
Krytox is the best grease.
Krytox is the best. l got this because it was a relatively good value for 2 oz.
L**E
Great for high temp work. Actually meets the stated spec.
Solved a troubling lab problem with using other grease's failings at high temp (i.e., leaking air =under pressure)Works great in chem lab.A bit pricey!
M**H
weatherstripping savior
We ended up purchasing the "real deal" even though it was almost double the price of most copies. After the first use on a 2005 CLK500 Convertible, ALL the squeaks were gone. The weatherstripping looks great and pliable once again.
Trustpilot
1 day ago
2 days ago
