LONYE W10727360 & W10269458 & W10269460 Microwave Door Switch Replacement for Whirlpool Microwave SZM-V16-FC-61 SZM-V16-FC-62 SZM-V16-FC-63

I ordered this set of switches for my Whirlpool microwave (Model WMH76719C‑2) after my wife noticed the interior light was intermittently failing for a couple of weeks. Eventually the light stopped working completely, and the microwave itself quit as well. That pointed to a door‑switch issue. I disassembled the microwave to access the switches and tested them with an ohm meter. They seemed to function, but I couldn’t tell whether there was a voltage drop under load. Given the microwave is 10 years old, I suspected the contacts had some carbon buildup. I also checked the internal fuse, which was still good. I’ve read that when the 3‑prong microswitch fails it often blows the fuse, so I was fortunate there. Since I already had everything apart, I decided to replace all three switches at once, if one was failing, the others likely weren’t far behind. This kit includes all three, and it’s important to note that each switch is different and must go in the correct position. The 3‑prong switch is obvious, but the two 2‑prong switches can be mixed up if you’re not paying attention. The tab locations make it easy to match them before removing the originals. The new switches fit perfectly and looked identical to the factory parts. Even the molded markings on the plastic housings matched exactly. After installing them, the microwave has been working flawlessly for several days. This kit is an excellent value and completely solved my issue. I’m very happy with this purchase.

Fixed my whirlpool microwave with the door problem thats so common

Easy DIY project to replace finicky old door switches. A new Whirlpool microwave with over stove installation was $800. These $10 switches perfectly replaced the faulty ones and my 10 year old microwave is operating perfectly again!

Got these for a Whirlpool microwave that was having issues. Replaced all 3 as long as I was at it. Switches were a bit of a pain to remove from their mounts. Beware, the plastic pins and retainers are easy to break so take your time and try not to be too forceful. I took one of the old switches apart and the contacts were very black and pitted. Having a microwave above the stove is convenient but, the switches take the additional beating from moisture etc. of cooking on the stove. Same issue with another whirpool microwave at our cabin, boil water on the stove and the microwave keeps signalling that the door is not closed. So, switches are an inexpensive fix. Probably last for the life of the microwave now.

Good quality switches. Easy to install.

Fixed my neighbors Whirlpool microwave while he was in the hospital. Microwave wouldn’t shut off when the door was closed. $11.44 instead of a new appliance for three to four hundred, all day long!

I bought these to attempt to fix a Kitchen Aid microwave and they didn't work. They come apart VERY easily and are cheap. If it works, great but dont expect much. For the price, its worth the try.

Does your microwave trip the breaker when you open the door? These three switches will likely fix it. If only one is bad, the others are probably bad or will soon be bad. Glad I ordered this set of three. I failed to notice one when doing diagnostic. All three old switches showed electrical arc damage. Recently, old Whirlpool over stove microwave would nearly always trip the breaker when door was opened. Also tripped breaker if plugged in with door open. I found two switches in it that had obvious arcing damage. It can be tricky to service an overhead MW without dismounting it. I'd guess It took me 2.5 hours; probably 30-45 minutes longer than if I had taken it down. But it's right next to a wall and pretty greasy. The most difficult part was the top screw of the black plastic shield behind the control panel; narrow access behind metal plate above control panel. I had to use a driver bit, 1/4" wrench, and both hands because i could not find my small ratchet bit driver. You will need a Torx 10, #2 Phillips driver and flat screwdriver. You may need a dull needle, punch or scribe if spade connectors have lock springs; toothpick might work. You'll want to take pictures of the wiring at each step before disconnecting.

This product seems good, I only need one switch for a door on a microwave and ended up using another switch on a pressure washer to fire the burner, so worked good for that as well, so I haven’t got to the microwave wave yet, but should be fine.

We have a 10 year old Kitchenaid microwave over the range ( YKHMS2050SS-3). It would start and then stop immediately. Using the " Popcorn " button on the front it said the " Door was Open", when, the door was closed. This is a problem with one or more door solenoid switches. . I ordered this kit from Amazon, delivered fast. I removed all three door solenoids ( one top right and two on the bottom right {. One of mine was bad. Changed all three ( using this kit) and microwave working within 2 hours of Amazon delivery. Make sure you take lots of picture when removing old switches since there are no instructions. Also since plastic of the microwave is old, the clips broke on the holders. I used a zip tie and it held the new switches in place. Not a super easy fix but this kit from Amazon saved us a new fancy microwave. Thank you Amazon...

My husband fitted the parts, well worth the money for our microwave to get fixed and working again. No issues with these replacements, thank you

Very pleased

I own the Whirlpool OTR Microwave WHM53520CS. These switches work with this model.