JOUNJIP Standard Plastic Welding Kit- UL Certified Welder 80W- Professional Grade Plastic Repair Kit for Automotive Car Bumper, Kayak, Tank Repair

Five star review. Thanks to this small business my car bumper and lots of other car owners vehicles are fixed now with this great kit. It's trustworthy and the results are real all at a great price. The plastic welding kit comes in a cardboard box and has all the things to do the job making it simple. Nice clear instructions, plenty of plastic pieces, 20 will be enough for a long time and could always order extra if needed. The aluminum tape was the most impressive, its of high quality material and didn't even burn or have a mark in it. Kit has mesh and a metal holder for the tool to lay on for cooling or idle. Two brass tips and a wire brush for cleaning that afterwards, looks good as new. The tool itself has a generous enough cord length, two prongs and a green light when on. Takes a few minutes to warm up and no problems at all using the tool. Very very reliable and the grip is good and super easy to use. Safety tips, use it outdoors or ventilated area because when in contact with heat and plastic it creates a candle like smoke and odor naturally and continues to smoke when you're moving the tool around plastic. Did a repair first and then went back and smoothed everything out and painted over it in matching color and can't tell it's been repaired. Job well done Jounjip has my gratitude and it's a certified product so there is peace of mind.

Was a bit hesitant to use this product, especially because I was repairing a PP (Polypropylene) motorcycle fender. The tab that bolts on to the bike had completely snapped off the fairing and I wasn't sure how to repair it. Read that PP can be hard to repair as some epoxy putties and adhesives don't adhere as well, or sometimes at all. Also read that PP has to be heated to 575 degrees to be welded and this plastic welder says its rated only at 525. When I got the product, it came with everything listed and brand new. I plugged in the welder right away and heated it for about 10 minutes before I used it. During that time I prepped the fairing as noted in the instructions. A simple sanding to create more surface area/grooves at the joint and a good clean after did the trick. I first started by slowing melting the tab back on to the fairing with just the heat, being super slow and careful to not overheat it. Once the OEM plastic was melted together I then reinforced it with the provided plastic welding rods. Worked perfectly. The tab is completely back on to the fairing and seems very strong. It bends a little and should hold up to all the vibrations on my motorcycle. Couldn't be happier at the result and saved me hundreds of dollars buying a new fairing or getting it repaired. TIPS: Preheat the welder for 10 minutes. Prep your plastic really well. Have an open workspace and well-ventilated area (maybe have a fan pointed at the plastic to blow all the plastic fumes away from your face). Most importantly, TAKE YOUR TIME. This process can take very long but if you want to get a good weld you need to take your time and watch everything you're doing. I often rotated the welding tip because I found myself melting parts I didn't want to touch. Manipulate the rod and put heat where you want it. My technique was to put the plastic welding rod on the area I wanted plastic, then applied the welder to heat it up and melt it. I would slowly pull the plastic rod away while pressing slightly down on the rod until part of the rod melted off the stick and stayed at the area. Once a piece of plastic was detached and at the repair area I heated it up and worked it into place. Super happy with this product. Great value and did exactly what it was supposed to do. Highly recommend.

As others have mentioned, the 'foot' on this is made of soft metal and will bend very easily. I anticipated this when I started using the tool and was careful not to apply too much pressure. Even so, after about 15 minutes of use, the foot was noticeably bent. Another review had mentioned drilling a hole down the shaft and inserting a drill bit to stiffen the foot. This worked for me. I didn't solder the bit in place but rather just cut it so it sticks out slightly from the top of the shaft. That way, when the shaft is inserted into the recess in the end of the tool handle, the bit is captured and can't go anywhere. A 5/64 bit seems to be about the right size for this. I used it a fair bit after inserting the drill bit with no sign of bending. I think this is a permanent fix. I'm giving it 4 stars because I anticipated I might have to make this fix. I looked around for higher quality tools that wouldn't require the fix and found them to be priced at least twice what this one. The rest of the tool seems to be good quality and there's a decent supply of plasting welding material supplied. If you're willing to put in a bit of work and sacrifice a drill bit to fix the foot, this would make a useful tool for a modest price. Without the drill bit fix, I don't think I would get much use out of it before the foot broke off or became so bent that it's hard to use.

Working as good as the day I bought it. No complaints at all

A tab broke on a panel on my tractor. $$$ to replace. It is polypropylene. I used this to repair the tab. It was easy to do with reinforcing mash in the kit and the iron and poly strips.

seems very well made plastic construction is solid does not seem flimsy what so ever and the tips seem very high quality seems like bronze very pleased with my purchase i expect it will give years of service.

Plastic welding tips would spin in use and after a an hour of use the shift of the tip became deformed and bent inward. Overall worked as a plastic welder but the tips are not great.

Bought this several months ago to repair a bumper that had been ripped off and had been reattached with zip ties before we purchased.🥴 Finally got around to taking off the bumper and using this to repair the places where it was either cracked or completely ripped out. It was easy to use from the start. The added mesh gives me more confidence in the repair. The new joints feel strong and should hold nicely once I get new clips to replace the 17 year old deteriorating plastic.

Lo utilizo en la reparación de plástico y funciona muy bien. Si tuviera un regulador de temperatura estaría genial.

Worked perfectly as described

Not hoping for any awards for my work. But for a first time user. The welder kit worked as advertised. And I think I just might get another season outta the old girl (my garbage can) before I need to replace her. Things I learned: Take more time shaping the mesh to the surface. You can see on the right side with the ridges - really looks like a dogs breakfast. I was fighting with the mesh a lot there. Left side, I did in small sections at a time. With more attention to cutting and shaping to the contours with the mesh. Easy recommendation.

Es lo que se muestra en la imagen , salvo que siento que falta un buen estuche.

I had a lot of hope for this tool in order to repair a broken car bumper. At my first use at puting a patch in place it broke in two, and note that I was’nt applying much pressure. At a closer look the welds seem to be inadequate explaining why it broke so easily. I hope I will be able to get a replacement unit. Update I called the number on the box, a guy in California answered and told me that he will send a replacement unit. I cross my fingers and hope to receive it soon. 'Follow up - July 8th I am now a happy camper cause I just receive a the remplacement unit. So bravo for the service!