LED Shop Lights 4FT, 40W 5500LM 5000K Daylight White, T8 LED Garage Lights, V Shape, Clear Cover, High Output Tube, Linkable 4 Foot LED Strip Light for Workshop, Warehouse with Plug, 10 Packs

Great shop lights. Easy to install. Everything is there. A bit pricey but ok if dark corners need illumination.

Just finished installing 8’ and 4’ lights in my garage. The different length lights link up just fine and the most I have in a single string is 3 (one 8’ and two 4’). They are lighting up my 3 car garage and put out more than enough light to work anywhere within the garage at 4’ spacing. I added additional junction boxes down the middle of my garage to keep the amount of linked lights down since there are restrictions on how many can be direct linked. There are good and bad things with these lights. The good: - The lights are bright and easy to install. 1 clip for each 2’ of light is what I installed at (4 for the 8’ fixture, 2 for the 4’ fixtures. - Cannot beat the price. We will see how long they last. The bad: - They say you can hardwire them. I think they meant “hard to wire” them. The lead they give you in the box for hardwiring is +\- 6” long. The stub of the three stranded wires is only stripped 1.” Anyone who has ever done anything inside a junction box knows that is way too short to easily work with. The stranded three wires coming off the white jacket needs to be 6” long, not the 1” they give you. Fitting three caps inside a j box with 1” of cable separation between load, neutral, and ground is hard, even using Wagos. Stripping the jacket leads to damaged conductors very easily if you aren’t careful… but then that leaves you with basically no room to connect to the fixture. Your Jbox has to be within 3” of the fixture connector. - heat sink and clip. The aluminum chassis that is also the structural back of the fixture is also the LED heat sink. It gets pretty warm. Hind sight being 20/20, I would have opted to mount the brackets with some spacers to get some space between the back of the fixture and my wood joists. I’m not too worried about the heat, but more about the fixture being able to dissipate heat efficiently. - the screws. Go to your big box store and get some proper screws. The tofu pot metal garbage screws they give you strip out very easily. Save yourself some curse words and just pick up a pack of decent screws. - the diffuser. Or lack there of. Nothing like getting glared by direct exposure to LED diodes. It would be nice to have a frosted lens option, even at the cost of illumination reduction. Other thoughts: Not dimmable. Tried hooking up a dimmable Lutron Caseta smart switch. The switch instantly started buzzing and shortly thereafter, the switch went into thermal shutdown. Works fine on a dumb switch. The 4’ cables to link strings cannot link up directly, so don’t think of putting two together and having an 8’ spacing between linked lights. The connectors have to go through a light fixture.

These are easy to install and bright. The screws are a bit cheap. Not a surprise. I used some self tapping screws. Easy change out. I only used 2 clips per light. Seem to be good. I have them in a barn and they seem to be just fine. These have 4 feet connectors. Not very far. I would order the 10 footers to go with it. You also get a mess of cords that you can hard wire with. If you are not putting them on a switch you can wire on a male end and it will plug into an extension cord. The package doesn’t come with any male fittings. Remember they are 20 bucks a light. They are good for the money. We bought another pack to finish the job and have some leftover when one goes out. They should just replace easily. Time will tell.

I replaced my old fluorescent and flat-panel LED lights with these Barrina T8s, and the difference is night and day. I am currently in the middle of a custom kitchen cabinet build and house remodel, and the visibility these provide is exactly what I needed. Pros: - Total Coverage: They light up every corner of my shop, making it easy to spot imperfections during the final sanding stages. - Color Accuracy: The 5000K light is crisp and clean, which is essential for interior painting and ensuring my cabinet finishes are consistent. - Easy Install: The Daisy-chaining feature made it simple to organize my overhead lighting without a mess of extra wiring. If you are doing precision work like cabinetry or flooring, don't settle for "okay" lighting. These are an organized, high-visibility solution that actually makes the work easier. Highly recommended!

Bought these in Oct of 2021, and installed them in a 40 x 60 shop, and man it’s lite up! Have recveved many great comments about the brightness!! I’m just now having to start replacing some.. one went completely out, and a few are starting to go out!! Only negative issue is the mounting clips could be better! I’ve had a few fall off when something bumps them! I have put Zip ties to secure them in place! But not keeping me from buying again, I have another set in my shopping basket now!!!!

I like the simplicity and brightness of these lights.

I really like these lights. They were very easy to install if you are handy at all. They have plenty of brightness for my 32x32 pole barn with 9 foot ceilings. I installed 9 of them, doing 3 different sets of 3. I really like the looks of them, they look modern yet minimalistic. I really like how they have clear casings on them so you can see each led bulb. There isn't much flex to them so you need to make sure you like up all the brackets you are going to use very straight. They are very light weight. I hard wired them into a junction box for each set of 3. I used lever connectors which makes installing braided wire and solid wire together a breeze. I just trimmed the switch off of 3 switch wires they give you and cut to length and used screw type connector into a junction box lid with a hole for a clean look. I also ran my wires over my foam ceiling and back down so I didn't have a bunch of extra wire showing. Hopefully these last a long time, but so far I love them

Lights are bright, and easy to install. I replaced the screw as I needed something longer. Only complaint is the packaging. I ordered once, a lot of the units were dented up, I sent for a replacement order, they picked up the original, and delivered a new set. The new ones were damaged too, but it doesn’t affect the performance, so I installed . It needs much better packaging though

After replacing my flickering fluorescent tubes with these Barrina LED shop lights, my 2-car garage now looks like a professional workshop—with zero humming or warm-up time. The 10-pack was the perfect amount to fully illuminate every corner. Why These Earn 5 Stars: ✔ Instant Daylight Clarity – 5000LM at 5000K eliminates shadows (perfect for detailing cars or DIY projects). ✔ Linkable Design – Daisy-chained 6 lights together with included connectors (saved hours of wiring). ✔ Durable & Efficient – 40W draw slashed my energy bill vs. old tubes (and the clear cover diffuses light evenly). ✔ Easy Installation – Mounted with included chains or direct screws (took 15 minutes for all 10). Real-World Testing: Garage: Covered 400 sq ft with 8 lights (2 left for spare). Workshop: Survived sawdust and vibrations from power tools. Costco Test: Compared to $50/unit brand-name lights—these deliver 90% of the quality at 1/3 the price. Perfect For: ✓ Garages/workshops ✓ Grow rooms (even light distribution) ✓ Retail/store lighting Pro Tip: Space them 4-5 feet apart for seamless coverage! 10/10 Recommend – The best value in shop lighting I’ve found.

I ordered over 32 light strip for myself and all my family followed early on because these are incredible lighting solution. 5000K is a good temperature to get great color accuracy and comfort when working. The installation couldn't be easier (small clips with simple screws, then clip on the led strip). They are insanely BRIGHT and you have the option to use regular IEC15 plug with integrated switch or you can hardwire them. The only (small) downside I may share is that the hardwire wire provided is quite short but since you can always use the regular plug and cut it to length, this not a real issue. I used them for more than 6 months now and never experienced early failure. Oh and I forgot to mention you can piggy-back up to 5 strips together so this is another easy way to get A LOT of light very quickly and simply. Pros: - Very Bright - Easy to install - Not expensive in regards to the quality - Can be bought in 4ft or 8ft strip - They will probably last a long time - not prone to early failure in case of regular on/off (compared to regular ballast/tube) - can be hooked together (up to 5 at once) Cons: - Hardwire a little bit short Watch out for coupons as these are seen regularly on sale.

Très satisfaite. Peu chère .Éclaire à merveille ma zone de travail. Facile à installer.

Great for my workbench. Extremely bright is just what I needed. Easy to mount with the supplied screws and clips. Thank you Barrina

Awesome garage lights. super bright, and I have no shadowing when working on my trucks. I have four extras that I intend on mounting near the bottom of the garage for when I am working under the vehicle.