MX6 Suction-Side In-Ground Pool Cleaner, Cyclonic Suction and X-Trax for Extreme Maneuverability

I have had the Zodiac MX6 swimming pool cleaner for two years now and I am very pleased with it. It is still running every day. There are pool cleaners that cost hundreds of dollars more, but this one works quite well. It works off of the suction of the main swimming pool pump, so does not require any other power source, and it runs all day, as long as the pump is running. It is meant to connect to the pool cleaner fitting that comes into the side of your pool. If you don't have this, the cleaner comes with an attachment to connect it to your skimmer. (However, if you use this, your skimmer will not operate while the cleaner is connected.) It comes with several 3-foot sections of hose so you can adjust the length of the hose for your particular pool. After I got the length of the hose adjusted to the best length, the cleaner has not gotten hung up on the pool's steps. It is easy to set up and comes with clear instructions. It does not require much suction, I have a valve to control the suction of the cleaner so there is still enough suction for the skimmer to work. It has really made a difference in the look of my pool. The most often I could vacuum my pool manually was once per week, but this cleaner is like a little robot that vacuums all day long. The only negative is that it gets jammed up by some leaves, particularly eucalyptus and privet leaves. It is easy enough to pull the cleaner up and get the leaves out, but if you get a lot of leaves in your pool this might be a nuisance. Also, I was disappointed that it did not come with a threaded fitting for the suction-side inlet on my pool, instead it just has a tapered fitting that you jam into the inlet. The hose can then fall out, which is a safety hazard. I bought an adapter at the pool store that helps hold it in, and has a spring-loaded cover to close the inlet off if the hose were to fall out. (An example is the GW9530 vac port fitting, on Amazon.) But, overall, for the price it has been a very effective automatic swimming pool cleaner. May 2025 - I have now had the MX6 for three years and it is still working great. However all of the original hoses have split. I leave the cleaner in the pool all the time, so I think the UV deteriorates them. To get the most life out of the hoses treat them gently, don’t bend them sharply, and be careful when pulling up the cleaner by the hose. The official replacement Zodiac hoses are expensive, but I have not tried the cheaper aftermarket ones. If you are careful with the hoses, they can last a couple years. Even with the limited life of the hoses, I still think the MX6 is a good buy.

First of all lets face it, done of these products are inexpensive . But for the value I found this M6 simple to operate and the best value. Recently I've tried the newest "Smart" Robot, Battery and Electric. They suck. If your trying to impress your techie friends go ahead and waste your money. I'll take a simple mechanical item that works over some high tech electronic item any day. Regarding the Smart Battery Robot, they get confused, just like the ones that are suppose to clean your house (shark, ninja ,etc). This is the thing!! $$$$$$ The batteries are going to wear out, electronic parts are going to go out. You can count on that! Only 1 year warranty. The one unit I brought paid over $700.00 Called the manufacture and asked the cost of the replacement battery. They wouldn't tell me, they said when the battery goes out, you need to buy a new machine . Really !! Ok Back to the M6 . If you follow the instruction, really simple it works great. Two important issues. #1 the hose length is important , just one length too many and it gets curly cues and hinders the operations . #2 the rpm of the wheels is based on the flow volume of your pool. The suggested rotation 20-25 per 10 revolutions doesn't work for everyone. I have a 16,000 gal. 32 ft. long pool. With a Solar heating system. When the solar is working, my flow rate is about 38 rpm , with my pump running at 2000 rpm's. When the solar is not working, my flow rate at the same pump speed goes up to about 50 to 55 gpm. With the solar on I have to adjust my diverter valve for the M6 to 17-18 revolutions to get more volume. When the solar is off, I have to close it down it down. I hope I didn't confuse anyone. The Zodiac M6 works great . If you got the right hose length . And your flow rate is set for your pool operation. If the Zodiac climbs the wall all the way up to the tile line and try to climb out of your pool, YOU HAVE TOO MUCH FLOW AND RPM'S, and it will suck in air and hinder the operation. On the other hand if it doesn't climb the walls and just sits on the bottom, and doesn't move well. You need to increase the flow rate. Don't just go by the 20-25 rpm per 10, you may have to adjust it a little. Every pool flow rate is different based on your pump settings rpm and flow rpm. But the Zodiac really does a great job, very happy , it's simple to operate. AND IT WORKS, NO ELECTRONIC CRAP AND SMART TECHNOLOGY THATS HAS FLAWS TO DEAL WITH .

This little cleaner is doing a bang-up job on my 18' X 36' in-ground vinyl pool. Had to fiddle a bit with the water flow mechanism, but I've now got it cleaning every inch of the pool floor and climbing the walls without cavitating. I bought this basic model over its bigger (MX8) brother because it has fewer parts to wear out. Recommended.

Nos ha ahorrado mucho tiempo a la hora de limpiar la alberca, lo único es que en nuestra alberca no sube paredes, no sé si sea por la potencia de la bomba o cual razón pueda ser, sin embargo, preferimos darle una cepillada a las paredes y escalones de la alberca de vez en cuando que estar aspirando como lo hacíamos antes, además nos ha ahorrado mucho en agua, recomiendo ampliamente.

Blocks up with the smallest leaves. Wasteof money and does not work as ad advertised.

No sirve, se descomponen muy rápido de los engranes de las llantas

This is by far the cheapest option out there, and it works great. I have used the big brother, the MX-8, for 3 years and the drive gears finally wore out. The only difference between the two models is a twin drive gear so that the two tracks can run in opposite directions, but this unit simply turns around its end rather than its middle and does the job just fine. You can see the two models reviewed at [...] My old one only lasted 3 years because it got jammed underneath the pool stairs occasionally, and wore down its drive gears until they were stripped and it only ran in circles. Considering that, I'd say the model is reasonably sturdy and performed well for 3 years.