Model APX2502-BLK Low-Profile Utility Aluminum Pick-Up Truck Ladder Rack with Load Stops

Purchased this rack for putting a rooftop tent on my 03 Tacoma step side (overland build). Since my truck has an odd-ball size (non-standard width due to the step side), I had to use a universal rack. This one wasn't crazy expensive, was pretty sturdy, and could fit multiple sized beds.Setup was fairly easy. There were good instructions. It uses a clamp based system that works well. My only thought is that the metal pads for the supports are big, so for my smaller truck, there is some overlap. I am sure they were gearing this more for mid to full-size trucks, but it does work on mine ok as well. There is just some overlap, and I centered them as best as I could.If you are looking to put something like a RTT on it, you may need longer bolts. My tent (Tuff-Stuff Ranger) came with 2" connecting bolts, and I could get them to work, but barely...it scared me enough to go buy 2.5" galvanized bolts to have extra threads to work with. Also, the bottom plate that helps hold the tent on had to be longer. This is due to the spreader bars being pretty thick and wide, so some rack & tent installs may be a bit tricky. It ended up costing me about $20 in parts for my tent, and most box stores (or Amazon) have the extra parts. I like the fact that the bars are a bit bigger/sturdier, as the static load for this rack is 800 lbs (many are not as high). Just the tent alone is almost 140 lbs, and then you put a few hundred pounds extra of people, and other items as well, and it adds up quick. It's a beefy rack, and I don't think there should be any issues with load. Also, it was just high enough that it didn't block my rear view...I can see some of it, but not enough that I cannot tell who is behind me, or block me in seeing as I back up. It does leave the tent up in the wind stream some, so will have to do some fairing work with that.Quality control is good - powder coat was done well, no major scratches. It got banged up a bit from shipping, but nothing that to me was returnable. The other nice thing is that if my truck dies and I get a new one, I can most likely just move it to whatever new truck I get. It also comes with load brackets that keep loads from shifting, good end caps, and weather stripping. It did not make any extra whistling or anything after it was installed.All in all, satisfied with this rack. Has not caused any issues, and seems to be holding up well.

I bought this bed rack for my 2010 Chevy Silverado. I haven't yet received my roof top tent, but I can certainly tell this product will not have any problems securely storing it.This thing is strong and assembly takes no time at all. I very much appreciate the rubber matting that goes under the pedalstals to prevent damage.The hardware is all stainless, and the nuts are nylon locking as well.There were no burrs in the aluminum and the powder coating is durable (I dropped one of the bars) and applied evenly.Buy this product if you are wanting a strong bed rack at a great price!

Overall works good for my use of hauling a Thule box full of skis. Compared to what the big guys charge for a similar product it is a good value but I don't know how they justify the prices for a pretty basic item. Anyway... I would put this in a 5 star especially for the price but the knocks I have are pretty big. Here are the goods and bads.Goods:As stated above, good price for what you get compared to other big name products.Easy to assemble.Seems reasonably good qualityBads:The clamps are cut from plate material instead of cast which is not a biggie as they seem strong enough but I did spend about 30 minutes with a file getting the rough burs and edges off of them.Not sure if they product test this very much. Biggest issue is the length of the plate that sits on the bed rail is to short. Even with flexibility of placement with the Thule box adjustable clamps I fought this around the bed ribs where I needed to place it. I ended up having to shift it forward which means the box was rubbing the back window a bit and also grind part of the clamps away to allow it to get enough bite on the plate. If they would just add 1" each side (or 2" total length) to each of those plates it would take care of that. I drive an F-150 so not like its a weird bed layout. exact opposite as it is the most common.Minor but other reviews noted the finish coming off. After 1 trip I have some issues at edges but it does not bother me. Not sure why they finish it at all unless the extrusion is not quality enough to leave as a clear finish?Country of origin - Manufactured in ChinaOverall - I would recommend it but if the manufacturer is paying attention here, give us a bit longer plate on the bed and watch QC on the clamps before sending.

Took less than an hour to put together, and the feel and look high quality. I have high end Yakima racks on my SUV and I like these better for a truck. Super sturdy and they look and feel substantial.I chose the longer bars since I have an old truck with a full size bed. I probably could've gone shorter, because the bars are adjustable (you can attach items to them) up until the end of the bars.Mine sits in the truck bed with a 150 lb tent on it. Other than seeing it back there, it would be hard to tell it's there. No movement, rattles, shaking, or noise at highway speed.

I am extremely happy with this rack , it was easy to install and seems to be a quality made product . I bought this to use as a multi purpose rack for work and play . I plan on mounting a roof mount tent for overlanding . I can say enough good things about it . Thanks for building a affordable and a well made rack . In case if anyone is wondering if it will fit your truck .... it will looks to be made to fit any standard truck be . Best of all no drilling involved !!

Great rack for the price. Bought this for my roof top tent and I am very happy with it. Some kind of security bolts for the bracket where it mounts would be nice, but I don’t see it being taken off easily. I got it installed in maybe 20 minutes alone. It’s very sturdy and doesn’t not make any noise. It was the perfect height for my 2018 Sierra 1500.

Perfect for utility truck

I like the rack , easy install . Seems very sturdy. Didn’t get all of the tie down parts and the weather stripping . Im hoping they swill ship those out fast and then I’ll be set. Would give 5 stars but didn’t get all of equipment.