Perfect for DIY lovers to design christmas or birthday gifts to your children, families, friends, and lovers, also good for business use to design a modelSPECIFICATION:- Filament Material: TPU (Thermoplastic Polyurethane)- Net Weight: About 2.20 lb (1kg)- Shipping Weight: About 2.98 lb (1.35kg)- Filament Diameter: 1.75mm (±0.05mm)- Recommended extruder temperature: 446°F - 480°F(230-250°C)- Spool Type: Plastic Spool- Spool Diameter: About 7.87 inch (20cm)- Spool Width: About 2.28 inch (5.8cm)- Spool Height: 2.76 inch (7cm)- Spool Hub Hole: About 2.09 inch (5.3cm)- Test Report: MSDS,FDA, ROHS,EN71-19,17PHTHALATE,REACH- Package Type: Vacuum packagePRINTING TIPS:Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.With bowden extruder you might pay more attention to these tips:- Print slow 15-30 mm/s Printing speed- First layer settings. (Height 100% Width 150% speed 50% e.g.)- Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer.If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly.It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear.Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament.
J**P
color is off (red)
If I cared more about color than printability, I would give this a 2 or 3. the red is pink.the print quality is super. lumps and boogers are non-existent.
K**R
Very nice printing, very "metallic" looking
Prints very nicely. The color looks just like the picture. It's more pink than red (the title is a little misleading so it loses a star). I can't think of the right word (if there is one) but it has a cool effect on the way it reflects light. Different angles show up as different shades so it looks nice on faceted prints.
F**Z
Adequate
I don't recommend any made in China products.
Trustpilot
1 month ago
1 week ago
