Deluxe Boat & RV Restoration Kit–Removes Oxidation, Seals & Protects–Restores High-Gloss Shine to Fiberglass & Gelcoat–New Liquid or Classic Powder Poli Ox–Easy, Long-Lasting 6-in-1 System

Wish I Had Used This Sooner – Stop Debating and Just Buy It! After a lot of debate, extensive research, and way too many hours spent using other products trying to restore and protect my RV's fiberglass that never fully delivered the results I was after, I finally tried the Poli Glow Deluxe Kit—and I am extremely happy I did. My only regret is not using it sooner instead of letting other people's opinions talk me out of it. The 6-in-1 complete kit is the right way to tackle fiberglass restoration from start to finish—eliminating oxidation, restoring the shine, and then protecting it long term all in one comprehensive system. The difference in how my RV looks after going through the full Poli Glow process is genuinely impressive and far beyond what any single product or traditional buffing method I tried before could deliver. The oxidation came off cleanly, the restored shine is deep and glossy, and the long-lasting protection gives real peace of mind knowing the fiberglass is shielded from UV damage and the elements going forward—especially important in the brutal Las Vegas sun. For anyone who has been going back and forth on whether to invest in the full Poli Glow Deluxe Kit—stop debating, stop listening to everyone else's opinion, and just do it. The complete system delivers complete results, and I won't be using anything else on my RV going forward. Highest possible recommendation.

Works amazing! After many attempts to buff I purchased Poli glow and done in less than half the time and beautiful result.

This stuff is fantastic! Makes our 2016 RV look like new where we have started using it. We are excited for Spring when we can apply it to more of our RV. We have tried every other option and nothing restored the shine like this. Follow the directions and just do a small section at a time. It is slow going for us as we are both over 75, but have had no problems with it.

I cleaned my RV very thorough from top to bottom before even starting the process with the Poli Glow system. Here's what I learned despite videos and lots of reading reviews. 1. Must be very clean and clear of anything you dont want to stick and show on your final outcome. 2. It takes more coats than you think it would (after 3 coats) it was still really streaky and I was starting to regret using Poli Glow. I ended around 7-8 coats and my rig had no major oxidation at all. 3. As one reviewer said, use a clean microfiber cloth v the applicator that comes with it, I found much better results with no lines. 4. Dont go to heavy on the coating, the instructions say this, but I went super light and it can be very easy to get lines with heavier application. 5. Dont look at your work after 3 coats, you will feel deflated, just keep going for at least 6 coats and then look at your work. 6. Only do small areas and look out for drips and lines, you need to get them out right away. 7. I did not use the Poli Ox, I was able to get any oxidation out with just the Poli Prep 8. Going up and down a ladder for hours sucks! 9. I hope it will come off in the next couple of years when I plan to replace the decals. Honestly, thats my biggest fear is how hard it will be to remove when the time comes. 10. After a scary start, I will say it did turn out pretty nice, was it easy, nope, would I do it again? Not sure, I need some time for my back to heal up! If you do choose Poli Glow know there are other options that maybe a better way to go such as wet sanding etc. Poli Glow is pretty good, but it can be pretty bad also if the surface is not cleaned and the Poli Glow applied correctly.

I have a 2015 Dutchman that we brought from Houston to Denver in 2018. It gets quite a bit of sun and there was an 8 x 10 where the gelcoat was pretty faded. I bought this kit, followed the clear instructions today, and just finished putting the new clear coat on, and it looks identical to the other factory gelcoat. Easy to use and doesn't require any expertise! I highly recommend! As others have said, worth every penny.

Used this on my motorhome. All I can say is "WOW"! I live in Florida and the water and sun beats up everything, my beautiful motorhome was looking horrible. Oxidation was happening, it was fading and just looking bad. I took the shot and bought this, I can't believe how well this stuff works! My motorhome looks amazing!!!!!!! I am so pleased!!!!! Best 129.99 is have ever spent!!!!!

Bought this product thinking maybe it will work but maybe it’s another gimmick. Nope, this product works as advertised. It is a big job and not for the faint of heart, but you will get your shine back. Tips from my experience: 1. Follow the directions closely in the product and if you have even slight oxidation and dulling finish, buy the kit. 2. Work in small sections as it will dry quickly - especially outdoors. 3. I used the scouring pad on the entire surface just to make sure I got consistent results. DO NOT get the scouring pad on your graphics - it will scratch them and break off loose edges. The No Scratch scrubber should be ok but not the scouring pad with the Oxi. 4. I got the best results with the Poli Glow going horizontal. I started at the top and worked down. Kept my mitt well saturated with product and used light pressure. Pressure on the mitt will cause the product to run and/or bubble - if that dries it will be visible. 5. Wipe up runs as soon as you see them. They will show through. 6. Horizontal application worked very well on my camper. Modern graphics these days tend to be mostly oriented horizontally, so that movement kept consistent results and prevented streaks and runs. 7. The more coats, the better the shine. We live in the Midwest and our camper sits in the sun constantly. Applied 10 coats of the product. Seems like a lot but it goes quickly. 8. The directions indicated and I noted it quickly. Once the outdoor temp gets too high or humidity is too high, the product will start to drag and be difficult to move across the surface. Time to quit for the day. The photos are of our camper. July 2024. I am working in small sections early in the mornings. You can see the results. These photos show the level of oxidation on the far end and what 6 coats looks like. I ended up doing 10 coats because of the extreme conditions our RV sits in. Will definitely use this product again.

The poli-ox worked well, just know that it will require several applications to remove old buildup and oxidation. once you are done, the paint will still look oxidized, but once you put the sealer on, the color will be deep and shiny. The sealer itself is supposed to be enough for a much bigger RV than we used it for. (17') We used 3/4 of a bottle for 1 side, due to the fact that we would remove and start over because it left ridges like a brush in paint. On the second side of the RV, we scrapped using the Mitt, and low and behold, using a microfiber towel to apply solved all of the issues. No more ridges and the remaining 1/4 of the bottle was enough to apply 5 coats. The mitt also wastes a LOT of product. So be warned use a Microfiber towel (that has been previously washed) and it will save you a LOT of time, money and angst.

Hard work making Hull all one colour but results are amazing let's see how long it lasts but def do min of 6 coats

Easy to use and does a fantastic job on oxidised gel coat.