Winsome 25 x 18.9 x 14.96-Inch Wood Night Stand/Accent Table, Brown (94215)

I love these nightstands!! Honestly, they’re one of the nicest pieces we have in our apartment, haha. They’re super sturdy and have a clean, light look with the natural, unstained wood. They fit the space perfectly—we have one on each side of the bed!They were also really easy to put together, which was a huge plus. I would 10/10 recommend them!

I have purchased 4 of these tables, and am completely happy with them for the price paid. Really, I consider them a total steal.I bought a pair of the dark brown/black/espresso colored ones about a year and a half ago to serve as end tables by the couch in my living room. They look nice, and we have had no issues with quality or functionality, so when it was recently decided that new nightstands were needed by a bed, a pair of white tables were ordered.In both locations, we wanted decent looking but didn’t want to spend hundreds of dollars each. End tables and night stands at real furniture stores easily reached up in to the hundreds of dollars per unit range, so we decided to expand our search. We checked the more “quirky” and discount-oriented home goods stores and, to be frank, the offerings looked like junk. There is a Big Blue Emporium Of Swedish-Designed Goods And Meatballs (you know what place I’m talking about) located in our town, so we checked there. We found something acceptable looking and reasonably priced, but still there was a nagging doubt. “Let’s check Amazon” we thought. And so we did. And here we are.All 4 tables arrived in fine flat-pack condition. Nothing was dinged or damaged, no missing pieces, nothing troubling to report. All pieces are made of real wood, not fiberboard or particle board or cardboard, like products from that other place we had considered. The benefit of having real wood is that it glues up nice, and if you have any scratches, it’s relatively easy to repair. The directions are simple, but sensible and easy to follow. With this sort of furniture, I always glue pieces together in addition to the screws just to add a bit of strength to the whole thing. Everything went together fine, and fit properly. The door was already assembled within the face frame, so no adjustment or fitting was needed.As for colors/ finishes: We are very happy with the coloring and quality of finish of these. The espresso color is a very deep brown/black that is evenly applied over the whole unit, no “splotchiness”. These tables, despite our best efforts to prevent it, regularly get drinks placed on them without coasters, and there are spills, and we have yet to see any rings or other defect appear in the surface finish. The white tables are a smooth flat-ish white paint (which is what we wanted), not a stained white-wash. I had one spot (about the size of a paper clip) on one of the white tables where the finish was a little marred. It wasn’t a scratch or damage, it just looked like the paint hadn’t been applied quite right. I had some paint on hand that matched just right, and a light touch-up made it disappear.I’ve only got a couple of things that I would list as “cons” though they aren’t deal-breakers, nor are they enough of a problem to cause me to lower my rating. I mean, let’s be real and recognize that when you’re only spending fifty dollars for a piece of furniture to be delivered to your house, it’s probably not going to have the same quality as a piece that is hundreds of dollars more expensive. You should know going in to the deal that you’re making a compromise somewhere.Anyhow, my “cons”:-The bottom of the unit is a thin piece of plywood that is simply laid on the frame. It is not fastened in place, and it “floats” around a bit. Also, it doesn’t strike me as overly-sturdy. It’s not like you’re going to keep your barbells or encyclopedias in there, but it’s a weaker part of the construction that I thought would be helpful to point out to people. If I were worried about it, it could easily be glued/nailed into place, but I haven’t found a practical issue with it.-The door’s orientation isn’t easily switched. If you want to switch it so that the hinges are on the left instead of the right, you are going to have to do a little wood-work, it’s not a simple flip-flop. This may be a deal-breaker for some people, but it hasn’t really bothered me in use. Again, I thought it would be helpful to point this out to people.At the end of the day, I can say that I am very happy with these units. I’ve had them long enough that I think I’ve given them a decent real-world trial, and they are something I would buy again (and I have!), and recommend to others.

- Well packaged, no wasted space in the box. Only one type and size of fastener used, so that's easy. Instructions are pretty crappy, just line drawings with no actual instructions. Still, I had it unpacked, assembled, in place with stuff in it, and the trash cleaned up in 35 minutes start to finish.- Assembly is just a few steps, do NOT over tighten screws. Just snug them up for now:1. Attach sides of drawer to back of drawer with screws, keeping slots aligned. Insert bottom into slots and attach drawer front with screws. Attach knob, then set aside finished drawer.2. a. Lay top upside down on floor. Use screws to attach back of cabinet to ends of ribs.2. b. Turn partially assembled cabinet so back is away from you, then slide side pieces into grooves. Use screws to attach the two support pieces to hold the bottom of the side panels (which is on top as you are building it), then insert the dowels of the other two supports into the holes on the back piece.2. c. Put cabinet front in place, reach inside through drawer to get the dowels in the holes, then use screws to attach front panel. Attach knob to door. Cabinet build is now finished.3 a. Flip cabinet right side up. Insert bottom of cabinet and drop into place. Insert finished drawer. Reach up from inside the bottom door to turn the drawer stop so it sticks up under the center of the drawer, this stops you from pulling the drawer out every time you open it.I'd recommend waiting a couple days, giving all the screws a final, careful tightness check, THEN inserting the wood plugs into the screw holes. I used only 4 for the front, and threw the bag with the other 4 into the drawer in case I need them later. I don't see the point of installing them in the back where they can't be seen.- Sturdiness is meh, at best. You get what you pay for. Overtightening will strip the screw holes, ESPECIALLY in the drawer pieces, so use caution. I stuck little felt pads on the bottom to avoid floor scratches, not necessary on carpet.One last thing, the strength and location of the magnet that holds the bottom door closed, and the location of the knob, combined with the overall flimsiness of that door causes the door to twist REALLY far when you pull it open. In my opinion, this would be the first thing to break on this piece of furniture with regular use. My advice would be to either replace the metal plate on the back of the door with a small washer to minimize the surface area in contact with the magnet, or just cover the plate and/or magnet with a couple layers of masking tape. I used 3 layers of blue painters tape and it worked like a charm. It stays closed, but opens easily without racking the door completely out of shape.

The media could not be loaded. Bought a side table for our bed room and found this online . The design was actually good and it looked neat . Height was ok for us and there was good space in the shelf and cupboard . We liked the color .It was considerably easy to assemble . Took me about 5-10 mins per table . The table had slight chips or marks .. looked slightly very small marks as shown in the photos .. otherwise overall the quality looked ok. 👍

I put this together myself! I am not a handywoman. Instructions were clear. The tabletop did come with a little scuff mark, which I of course didn’t notice until it was put together, but it’s not too bad. Fits perfectly next to a bed. The quality is very good, it is heavy!