Pocket Rivet Style Front Rear Fender Flares with 10 x LED Amber Side Marker

So first off, these were installed on a 98 Cherokee classic. The package was shipped quickly and was packaged perfectly. The bolt bags were zip tied to the rubber packaging materials which is a great idea because if the box is damaged in shipping the bolts will likely be lost in transit (I've had this happen previously on other large items). They are by no means designed to fit this vehicle. We did a lot of backyard modifications to make them work. I chose these ones for the JK wrangler because of the angle of the curves on the rear wells. With cut fenders its impossible to bolt on the ones that are marketed for and XJ. We had to slit and bend the driver side and weld it in place to allow for the gas door to still open. We had planned to slit and bend both of the rear flares to make them level and not be sloped as seen in the pictures. The problem with that is that since we have cut fenders and 35" tires, the flares would have to stick down in the wheel-Well and would then rub the tires when flexed. There also wouldn't be enough room to bolt them for stability and they would have to be welded on. The front flares fit amazing except for one spot (where the XJ fender trim is). We used flat steel and clamps to reshape the body metal so the flares could sit flush. The (plastic) body trim had to be cut and trimmed to line up and allow the fender flares to bolt flush. Once installed these are the exact same width as the side mirrors when in driving position. This is perfect for us since we have 35" x 12.5 " tires and we installed these to keep the mud from slinging to the windshield. The only problem is that we slide through narrow trails and sometimes beat the mirrors off the trees. I am expecting to bend these at some point and I will post updated pictures after we bang them off a few trees. Took it out tonight and finally got to test them and the results were great. I can now leave my windows down while banging off the Rev limiter in the mud (forward and reverse). Very happy with the price and quality. (You can laugh at the angle of the rear flares because they look kind of goofy, but that was the best solution for what we needed.)

Looks great but came a bit scratched up. No instructions but that’s ok.I installed the fenders into M6 rivnuts that were there from my previously installed metal fenders.Lights are bright. Tapped the rear lights into brake light DRL wire, and front lights to the factory wiring harness for the front side marker DRLs.

Super easy to install, just loosely install 2 bolts on top of arch and guide front and back bolts in by aligning it with a screw driver in the nearest hole. Finish looks amazing and quality exceeded my wildest expectations for the price!

Very flimsy, and hardware is junk. Also light wiring is wrong, the plug one only has 2 connectors and the one with no plug has 3. Should be opposite. Plus delivered all scratched up (cheap plastic). Too bad I already paid to have installed.

They look "cool" however, they are cheap lol.I'd give this 4 stars if I could justify it but there's some issues.The installation screws are too short, the holes for the lights are too narrow for the lights themselves and the fake metal rivets on top look, well... really really fake lol. Check out the picture.I needed new fenders anyway do to some cracks in mine so this was a quick, and fun alternative to the stock ones. But they are cheap. So if you're an off-road jeeper and want some cheaper options, these are them.

cheap but good some hardware was a little short but simple fix $3 at hardware store for the right length bolts but other then that looks great on 07 wrangler. lights seem good not cheap , very easy to hook up about 2 hours to install really all you need to install is phillips screwdriver and a pair of plyers or 10 mm socket if i remember correctly.went on a mild off road trip with friends and they even look cool covered in mud. hope this helps its my full experience.

Every looked good until I found I was missing the driver side rear fender and had 2 of the passenger side rear fenders. The worst part is I paid for them to be installed due to time constraints.

I was super excited to get my new fenders for my new Jeep! After I put them on I realized a reflector was missing. Even though it took me a few weeks before putting them on an noticing the missing reflector, I reached out to the seller to let them know. I was very pleased at how quickly they responded and was very courteous and understanding. They made it right by sending me new ones and very quickly! I am loving my new fenders on my jeep! Would definitely purchase again if anything were to happen to them.