Hangman Z-Hanger Heavy Duty Mirror, Picture and Panel Hanger -Aluminum: Z-6-3

100% full real deal right here. These are solid, precision manufactured, quality hangars. I purchased the 12" versions to hang a rather heavy antique mirror - worked like a charm and it looks great on the wall, far better than any method I have used before.I purchased some heavy duty drywall anchors (the mirror has sentimental value) to be safe (if memory serves they include some anchors I suspect would work just fine, I chose to go with a little extra insurance despite the holes in the wall it will leave). The brackets have multiple holes so you can pick and choose a little bit, clearly the heavier the item the more screws you may want/need to use.All in all, very impressed and compared to another product I purchased from Amazon and have reviewed, I will buy these again.

Great product, very sturdy. We hung a very heavy custom made shelf that we knew was going to end up even heavier once we added tons of hot sauce bottles to it for display. I was able to mount it all by myself. My only complaint is my package did not come with drywall anchors as it pictured. But I used some I had on hand and it worked perfectly. We hung 1 screw in an actual stud and the rest in drywall. It is easy to hang and very secure. Very happy!

I purchased this to hang a heavy French Door panel horizontally on the wall as a Farmhouse decor. My fear was not having enough support on the dry wall and it not being straight. This hanger tackled both fears, better yet it conquered it. It was surprisingly ease to install other than someone assisting me with the weight of the door. The hanger was a blessing. I needed security that this door would not fall on top of me while I’m cooking. I placed it above my kitchen cabinets. I had a large empty plain space between the top of the cabinets and the ceiling. The hanger made my vision possible creating a beautiful center attraction. Here to buy another hanger and stopped to write a review.

I needed to mount a 15lb acoustic panel to a sloped ceiling. I chose these Z hangers for the interlocking design. This set worked great. On a typical wall hung piece, you'd use one pair (one on the piece, one on the wall). I used two pairs for this installation, one on top and one on the bottom. The mating of the pairs is perfect. Not so tight that it's difficult to hang, not so loose that there's concern about the piece staying in place. This ended up being a great solution to a somewhat unusual mount. Going to order more and hang more panels.

These brackets were a little thinner than I expected and they did not come with anchors as shown in the photos. We used our own to install. So far it is serving its purpose and holding up well with no issues.

I used the Hangman Z-Hanger to install a 24" x 6" x 1" wood art that is fited with hooks to hang anything from keys to small coats or jackets. I used the picture directions that came with the product. Using a stud finder (to avoid driling the stud) and a level to install the hanger 'level', I marked 5 large holes with a pencil. I driled small pilot holes in the center of the large 'marked' holes in the sheetrock. Holding the z-hanger against the wall and using the pilot hole to start MANUALLY screwing the large silver colored screw into the wall to secure the z-hanger.I positioned the other Z-Hanger bracket on the back of the wood, marked and drilled small pilot holes and attached the z-hanger bracket to the wood. Then I hung the 'wood art' on the wall by positioning the backet on the wood above the bracket on the wall and bring it down to secure it in place.

Used to hang a large mirror with a wood frame which weighs about 100 lbs. I used two sets of 12" hangers, one on either side of the mirror securing the wall part of the hanger with one screw each through a stud. I used the other provided screws into the wall board. I screwed the mirror part of the hanger with the remaining provided screws.It took two of us to lift the mirror. It was easy to attach the two halves of the hanger together. I have used these previously on large framed art, but nothing as heavy as the mirror. It worked beautifully!

Bought these to hang a heavy coat rack made of heart pine floors and old door knobs. Each pack comes with 2 hangers in it. We used 2 packs placing two hangers at the top and two at the bottom. They were simple to install, carry the load well, allow a flush mount, and keep the coat rack very secure. We are pleased with our order.

We bought this to hang up an extra heavy piece of art that is made from nails we really did not want to risk it coming crashing as it above a seating area. Was very easy to instal and is so secure. Would definitely buy again for hanging something heavy.

Perfect for hanging heavy mirrors

Fungera perfekt för ändamålet.

Excellent product I’ve used a few of these excellent quality & easy to fit.

Super kon deze niet in de bouwmarkten vinden