Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 2500 PSI, 1/4 Inch Quick Connect

I read the reviews and listened to the key point "Keep your sand dry". I was skeptical but can attest that this thing worked liked a champ! unbelievable how it took scale off. once i could see what i had to work with the feed conveyor is going to be a total rebuild not a patch job. the hours of wasted time this saved is worth it's weight in at least silver! One thing i said to my neighbor was no matter how many times i saw keep your sand dry or it will clog up of course there was that guy who gave this 1 star because it clogged up. this is 5 stars all day long.

works good, make sure you have the correct gpm pressure washer

Ok I read others reviews and I saw mixed reviews. Even so I decided to give it a shot due to my sandblaster and industrial air compressor being at my other house in another state. My home pressure washer is a Briggs n Stratton 2100psi Sand - Lowes play sand... i wasted a half bag trying to figure it out lol Important tip #1- pour sand into a bucket through a window screen mesh also purchased at lowes. This prevents unseen chunks n clogs in tip. Important tip #2- when connecting the sandblaster attachment to the pressure washer wand *make sure to put the sand feed port facing up*. This prevents water from wetting the sand and clogging the feed tube. After I figured it out I was able to pressure wash my 1972 Oldmobile Cutlass rear end. Note: upon drying it flash rusts super fast. No big deal. Just spray the part with Ospho or Chemprime and it will eat up the rust and clean it so you can Epoxy prime and paint. Would I buy another one? Yes for small projects but for big projects Id rather use my traditional system I think this sums it up. Most errors are user error so dont be defeated when something doesnt work right. Pay attention, observe, and you will find the problem. Unless you vote democrat then theres no hope.

Quick connect doesn't fully seat into my pressure washer wand. I didn't get to try it out. I requested a replacement through Amazon. Based on reviews, others have had this same problem but some have had good experiences. I was hoping I would be lucky. Hopefully the replacement works, otherwise I'll ask for a refund. 3/22/2021 Update: I received the replacement and had the same issue. The quick connect is longer by 0.6mm than all my other quick connect accessories. I contacted the seller through the contact card provided in the package. They replied within a day and apologized for the issue. They sent me a couple M22 to 1/4" quick connect adapters. These adapters worked. Their blasting extension fit pretty tight in the adapter but at least it fully seated and locked. I used this with soda blasting media. It worked well for my project. Keep the siphon hose up so water doesn't fill the hose and clog with your blasting media. I didn't have this issue but I see many do in the reviews. Just read the directions people. 3 stars because I had to wait for adapters that were not included in this kit. Otherwise 4 stars is appropriate.

Started off good, seemed to be working well, sand was flowing, rust was coming off... Then I started to have clogging at tip, wet sand. Ot happened several times, cleaned it out. No suction after that. I was very sure to keep suction outlet on top of pressure washer. Made no difference. My honest opinion is it's a piece of junk. Spend a few extra bucks and have a professional do your sandblasting. This things a headache.

I needed some sort of sandblasting mechanism that I could blast large pieces (aluminum transmission housing & transfer case that I'm rebuilding) so I opted for this. Saw lots of positive reviews and gave it a shot. So glad I did! I had two bags of plain "play sand" from the home improvement store and they worked like an absolute charm. I have a 10+ year old gas pressure washer and it had no trouble at all cleaning the two. Have a bucket ready to pour your sand in and just stab the suction hose in. You WILL want to have a face shield while you're blasting though; if your pressure washer is decent it'll blast water/sand everywhere. I have some steel crossmembers I blasted as well and surprisingly they didn't immediately rust up like you'd expect. As another reviewer said "money well spent!"

This thing was awesome. I bought it last fall, but just got around to getting to work on a trailer that I have to replace the deck on. Using dry play sand I knocked 90% of the rust off the trailer in a couple of hours. Works awesome with my 2000psi electric pressure washer. Just make sure the sand stays dry and it works like a charm.

I could not get a continual feed of sand. The sand would feed through the tube for a second or two then quit. When it did work it worked pretty good at getting rid of the paint and rust. It was much easier to just put sanding disks on the grinder and grind it off.

worked better than expected to remove rust from car parts being used in classic car rebuild.

Used this with my pressure and worked fine for about 3 minutes then stopped working completely. I tried to clean out the nozzle but didn't help. Would not recommend this product.

The suction hose easily kinks and did get sucked flat a couple times. But the trick to success is to have really dry fine sand. When I used good media this thing did a great job. Some of the other units have reenforced hose but this one shipped next day and works fine.

does a reasonable job. Cleaner that regular sand blasting

This little thing here really is something. If you got something on something and you want it off that something, this thing rite here is that something to do it!