Supreme Suspensions - Adjustable Track Bar for 1994-2001 Dodge Ram 1500 4WD and 1994-2002 Dodge Ram 2500 3500 Heavy Duty Steel Trackbar + Track Bar Relocation Bracket for 4.5" - 8" Lifts 4WD

You have to do some drilling. The bolts that come with it are trash. Or missing. But it worked after running to ace and getting bolts. Instructions didn't come with it. Had to youtube. But has been a year since installed on the lifted 2nd gen and no issues

#1 Relocation bracket drops the track bar in such a way that it changes the angle so a drop Pitman arm is required.#2 after installation the bracket held good for about a day 20 miles or so brought home Retorqued all the bolts to spec about A week later bracket started squeaking anytime I go over bumps or turn the wheel Retorqued the bolts again about a week after that ended up having to weld the bracket in place to get the squeaking and creaking to stop.#3 Bar shipped with The wrong size joint on the left end. it was the same size as the joint on the right end. I just ended up replacing both because the stock ones that came are pretty poor Quality. I’ve used supreme suspension products before on a ton of my customers vehicles who wanted to do budget Lifts I never had any problems I was quite disappointed With this one. I would recommend spending the extra hundred and purchased a kit from skyjacker or Procomp.As far as quality of the kit itself the welds on the track bar relocation bracket are very good and it comes With a pretty tough coating. The bar itself is also good quality it’s just the joints are pretty cheap with a lot of play in them. Installation is super easy but I would recommend moving the two mounting holes on the top Or possibly re-designing this section of the bracket with something that cups the crossmember so as you tighten it it provides a more secure Point of contact. I also tried 2 hardened bolts at this location with the provided sleeves but it was still not enough to keep the end of the bracket for moving and causing noise. If I hadn’t already purchased a drop Pitman arm and new joints I would’ve sent this kit back prior to welding it in place but at this point I’m kind of at the point of no return.

Been on my 98 dodge ram 1500 with about 10 inches of lift for a few months so far so good does take a small bit of drilling but nothing the average person can't do just remember to red lock tight everything I even put a few hefty tack welds on it just incase

I received the product on time. The box was fairly beat up and so the track bar and bracket were scratched up. I didn’t care because my truck gets used, but it’s worth to note if your truck is for looks and you need pretty parts on it. Plenty of extra goodies in the shipment like stickers, bottle opener etc.I had a few questions about install and gave the tech support line a call. They were busy, but had a tech call me back in under an hour. He was very helpful and respectful. All in all this track bar is sturdy with a double heim and the new bracket fits up decent. There is some flex in the bracket so I’ll be trying to figure out some gussets to help support it on the frame side. Much better product than stock and would recommend supreme suspensions to others in the future.

I added a two inch leveling kit to my 2001 Dodge Ram 1500 Sport. This offset the axle with the stock track bar. This adjustable track bar was easy to install and let the axle sit where it should. It’s heavy duty so I’m sure I won’t break it.

Love this product received on time and really tightened up my sloppy steering in my 2002 dodge 2500 with a 5in lift.

The relocation bracket keeps bending when turning and makes a squeaky noises. And when I drive it feels like loose steering or sketchy. Wouldn’t recommend at all. It was a waste of money tbh

First and second one cracked in the same spots. This last one caused an accident. 10/10 DO NOT RECOMMEND