Product description UTUO Centrifugal Brushless Dual Ball Bearing Blower Fan is made cooling and ventilating solution with long life expectancy. Dual Ball Bearings design, PBT+GF housing and blade ensures a wide operation temperature ranged from -10โ to +70โ. Small size and Light weight but can generate a decent air flow output. RATED AND OPERATING CONDITLONS Rated voltage(VDC): 24V | Rated current(A): 0.40A | Rated input power(W): 9.6W | Rated Speed(RPM/Min): 3000ยฑ10๏ผ Startup voltage(VDC): 17V | Operating voltage(VDC): 21.6-36.4V | Operating temperature(โ): -10โ-+70โ AIR FLOW-AIR PRESSURE CHARACTERISTIC Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed. Max. Air Flow: 45.40CFM Max. Static Pressure: 35.70mm-H2O Max. Noise: 65.10 dB-A STRUCTURE AND FORM Bearing: Dual Ball Bearing | Structure: Cross flow fan Housing: PBT+GF30% | Blade: PBT+GF15% Dimension: 120x120x32mm | Screw Hole Spacing: 104.5 mmยฑ0.5 | Weight: 202g Connector: XH2.5-2P | Cable Length: 20cm (8 inches) ELECTRICAL PROTECTION Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec. Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won't be burned within 5 sec. when Vcc &GND are exchanged. Insulation Resistance: At least 10Mฮฉ at 500 VDC between Housing and Both Lead Wires. Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires Review: Packaged well - Easy to figure out connection. I used it for an inflatable. Review: Works great on Creality K1 for auxiliary cooling - I installed this to have auxiliary cooling on both sides of my K1C 3d printer. It works great. However, it isn't quite as powerful as the OEM part, but it isn't really any issue and improves print quality at high speeds.
| ASIN | B07V41X4RT |
| Brand | UTUO |
| Brand Name | UTUO |
| Compatible Devices | Desktop |
| Cooling Method | Forced Air Convection |
| Customer Reviews | 4.4 out of 5 stars 45 Reviews |
| Item Dimensions L x W x H | 4.72"L x 4.72"W x 12.6"H |
| Manufacturer | UTUO |
| Material Type | Copper |
| Maximum Rotational Speed | 3000 RPM |
| Model | JT-FS-0002-1232-24 |
| Noise Level | 65.1 Decibels |
| Number of Items | 1 |
| Part Number | JT-FS-0002-1232-24 |
| Power Connector Type | 2-Pin |
| Product Dimensions | 4.72"L x 4.72"W x 12.6"H |
| UPC | 600231336888 |
| Unit Count | 1.0 Count |
| Voltage | 24 Volts |
| Wattage | 9.6 watts |
P**N
Packaged well
Easy to figure out connection. I used it for an inflatable.
S**Y
Works great on Creality K1 for auxiliary cooling
I installed this to have auxiliary cooling on both sides of my K1C 3d printer. It works great. However, it isn't quite as powerful as the OEM part, but it isn't really any issue and improves print quality at high speeds.
E**P
Works well, moves a LOT OF AIR.
I am using this as part of a 3D printer cooling assembly, and this fit the bill very well.
L**M
Exactly what i expected.
Using the fan on an 18v-20v application 24/7 and i have had no issues.
B**.
Does what it is supposed to
Worked great as a replacement motor for my Halloween inflatable.
J**O
Good
Worked great on small window in bathroom
J**B
Itโs good for the money ๐ฐ
Itโs good for the money ๐ฐ
E**A
Moves a lot of air
This fan is excellent. At 24V it moves a lot of air - you can feel the wind from the exhaust from 1ft away. It is quite noisy though that is to be expected. I tired running it at 12V and it is quieter with still plenty of power.
T**A
As expected
Fan was as expected, too small for our application.
Trustpilot
2 months ago
2 months ago