Standard Size Receiver Fan Remote

I purchased three of these for my three bedrooms that only have the single light switch with each room having a Hunter Antero 46 in. LED Indoor Brushed Nickel Ceiling Fan. I needed to use the fan pull chain to control the speed of the fan and the light pull chain to turn off the light at night to keep the fan still on. Not a huge issue, yet I was looking for a simple remote for when guest visit. This product has worked flawlessly on one fan for over a month now. I was hesitant to install the other two for syncing issues I discuss later. Install was simple as long as you understand electrical wiring enough to install a fan, and maybe in this case just the basic ability of following instructions. Each control kit came with five plastic twist wire connectors. Installing three control kits, I had 15 wire connectors. As I installed the three units, two of the fifteen wire connectors (13%) came apart where the inter metal separated from the plastic outer piece. Perhaps I was twisting too much, yet I've never had this problem with other wire connectors. There were already wire connectors before I installed these control kits, so I reused those when the two failed. My biggest concern was having three identical remote controls that would control three different lights/fans (How would they sync separately?). I really didn't want one remote in my boy's bedroom to turn on the light in my girl's bedroom or the third bedroom. Other products had toggle switches at the control unit and the remote control to sync them up. This product does not have that, and I'm not sure if this was required, yet here were my steps to avoid one remote controlling two lights/fans (follow all precautions for electrical safety with breakers, etc. I will not list breaker steps here): 1) Turn off the wall light switch in bedroom 1 and install one Universal Ceiling Fan Remote Control Kit in bedroom 1. Turn on the wall light switch and test remote light and fan buttons. Everything worked as advertised for me, including the timing feature which can be convenient when needed. 2) Turn off wall light switch in bedroom 2 and install second kit in bedroom 2. Go to bedroom 1 wall light switch (not the remote's light button) and turn it off. Then turn on wall light switch in bedroom 2 and test remote light and fan buttons. Only bedroom 2 should be working. I then went to bedroom 1 and turned its wall light switch on and tested its remote. Luckily both remotes worked for their respective bedrooms. 3) Turn off wall light switch in bedroom 3 and install third kit in bedroom 3. Go to bedroom 1 and 2 wall light switches and turn them off. Then turn on wall light switch in bedroom 3 and test remote light and fan buttons. Only bedroom 3 should be working. I then went to bedroom 1 and 2 and turned their wall light switched on and tested their remotes. All three remotes only worked for their respective rooms. It might have been overkill and maybe each remote is already assigned to its control unit at the factory, yet I didn't want to mess around and this worked for me. I gave it 5 stars, yet I thought about 4 stars in terms of build quality. Both the remote and the control are plastic that doesn't seem too sturdy. The wires from the control unit seem cheap as well compared to wires from the fan itself; I understand different wire gauges, yet I don't know how to describe the differences. The remote came with a simple wall mount, yet pressing the remote's light and fan buttons causes the remote to toggle towards the wall in the wall mount. This could have been designed better so the remote would not move if you want to press the buttons while the remote is in the wall mount. Overall, five stars, maybe four, yet it works as advertised and it was very affordable so perhaps a high build quality can't be expected. Oh, one more thing my wife doesn't like is that every push of the remote's light or fan button causes a beep at the control unit. I personally like the audible feedback that the control unit received the signal from the remote control. My wife does not; to each their own.

Our old setup was from a different manufacturer. When the controller (built into the wall switch) failed there was no direct replacement, for just the controller, from that brand. Buying a new paired setup from them carried an absurd price. As such, the search was on for a different solution. That search led me to the LPHUMEX setup. Wiring their box into the fan itself was straightforward. Clear instructions with labeled and color coded wires compatible with our existing wiring to the fan. The remote control is hand-held with no install into the wall switch as with our old one. The only downside there is the need for batteries in the remote, which do not come with the kit. The only aspect of functionality missing is the ability to reverse the fan rotation. I knew that when purchased, so no surprise. Just be aware of it in case that is a feature you need.

I saved so much money by replacing the remote kits for my outdoor fans than by replacing all three fans. These worked perfectly, and I love that I can adjust the light color and fan speed. Lost the remotes, and this was a cheaper fix than ordering “universal remotes” that may or may not work. These were easy enough to install and fit right into my fan, where the old ones were.

For probably the past year I’ve been nursing our 10+ year ceiling fan & remote, but about a week ago it became evident I’d lost the battle. So after watching a few YouTube videos to troubleshoot the issue, clarify the repair process and confirm the size receiver my fan has, I went on Amazon - spotted the LPHUMEX Universal Fan Remote - with 12k+ reviews - and decided to give it a try. I mean, ~$15 looked like an unbeatable price. Within 48 hours I not only had the product in hand, I had it installed and working perfectly. Yes, the sensory feel of the product was one of relative cheapness, and the wire labeling & instructions weren’t up to “Made in the USA” quality (because it’s not made here), but the simplicity of the install and operation of the remote made up for any lack of perceived quality. So for now, my old ceiling fan is not only operating perfectly, I dare say it’s operating better than ever!

Not sure if my experience was just a fluke or if I'm just pickier than most, considering that an overwhelming majority of the reviews here are stellar. Anyways, here's my experience. The Good: - Easy and straightforward to use and works just as expected, especially once the beeps are disabled (more on that below). - The ability to control the lights and fan separately, and probably the biggest reason to get this setup in the first place, if you have the fan and light wired together to a single switch and are tired of having to fumble around with the pull chains. - Timer function (I honestly don't see myself using it much, if at all, but it's nice to have!). The Bad: - Cheap build quality. The remote itself is ok, it's the control module (the black box that one wires into the fan in order for the remote to do its thing) that I have an issue with. It just leaves a lot to be desired, and ultimately the reason for the 3-star rating. - The wires coming out of the control module felt quite flimsy, to the point I found myself questioning if it would even be safe to use. - By far my biggest complaint, and the one that compelled me to write this review, is the fact that the wire nuts that came with this kit were completely useless and would literally fall right off, leaving the wires' connections fully exposed. I tried twisting the wires in different ways, trying different wire nuts, but they all kept falling off no matter what I tried. To me, this is completely unacceptable, not to mention a potentially big fire hazard... Needless to say, that right there killed any remaining confidence I had in this kit. Thankfully, I had a few spare wire nuts laying around and I was able to complete the install properly. Additional Things to Keep In Mind (Not Factored Into the Rating): - By default, the remote will beep whenever a button is pressed. I personally despise this feature as I find it to be utterly annoying and tacky. Luckily, as I read through the full description, I was able to figure out that the beeps can be disabled by simply pressing and holding the 8-hour timer button for 3-5 seconds until a double beep is heard, and voila, no more beeping! Had I not been able to disable this, I probably would've given this a 1-star rating and just bought a different remote kit. - It wasn't until after making this purchase that I noticed there is another version of this exact same kit that has a smaller control module. I would strongly consider getting that one instead, especially if your fan has a smaller canopy, you have a shallow electrical box, or both (like I do). I ended up having to cut off part of the plastic housing in order to get it to fit in the canopy (as seen in the attached photo). UPDATE: The seller reached out to me about this issue very propmtly and offered a replacement. I was able set my kit properly (see above) and it works exactly as intended. But at least you can rest assured that if you happen to get a defective product, the seller will be VERY helpful.

Easy to install and works great.

So much easier to install a fan remote when the transmitter is small like this one. I could not fit the canopy because the original transmitter was very bulky and I could not get all the wires to fit inside. This one made it so easy that I was done in 5 minutes whereas the other one took me hours and I still wasn't able to install it. The long term durability remains to be seen but I will update the rating if it fails too soon.

Works fine and we bought the smallest one but it still did not fit in the fan mounting bracket. So pay close attention the the space you have and the number of wires coming from the ceiling. Not enough space for everything. But it works fine and that is what matters.

Becareful.. I purchase this and found it's working on 110v not 220v as in saudi arabia.

O produto não serve, como informado, para ventiladores Hunter, por ser bivolt e não se adaptar as diferentes velocidades, forçando o motor; portanto, não recomendo.

Es práctico. Fácil de instalar

Works as well as the original

Facil de instalar