JANCHUN Crystal Clear Epoxy Resin Kit 16oz, Bubble-Free, Anti-Yellowing, Self Leveling Easy Mix 1:1 Coating and Casting Resin for Table Top, Molds, Tumbler Crafts, Painting, Jewelry, DIY Gifts

I used this clear resin to repair a refrigerator drawer on my camper. It was a part I could not source anywhere, and I had large pieces missing. I ended up being able to use clear plastic tape to create a backing for where the plastic was missing. I then mixed up this 2-part epoxy, and poured it into the "hole." The epoxy self leveled. I did see a few bubbles, so I took my heat gun and gently heated the epoxy. This eliminated them. Then I let the drawer cure overnight on my kitchen counter. So far, the repair has held despite being put to use in a high stress environment - inside a camper fridge that bears weight and has to withstand going down the road, bumps and all. Because the epoxy is clear, my repair is barely noticeable. I estimate this epoxy more than paid for itself, because I do not know how much a new drawer would have cost if I had would ever been able to find one. This epoxy got me out of a jam and saved me money. It's easy to use and I highly recommend.

Sets up perfectly and crystal clear. Easy to follow instructions. My first time working with resin, came out perfect.

easy to use. simple directions and i like that it comes with little disposable cups. a little harsh smell so make sure you have a window open near by

Very good product as long as you follow instructions; mix well, mix slow! Beautiful glassy finish but does bubble easy so have your heat gun close! It cures well but does not like mica powder mix! If you use a pigment don’t use much. I have bought several times now and will continue to purchase for my art studio

I already made my third purchase. If you follow the directions, don’t over mix, glaze the top with a blow torch. All the bubbles come out, it self levels nicely and it’s crystal clear. There were so many moisture ripples on this corner stand in my work office. It’s built into the wall, so I couldn’t remove it. Half a** patched the holes, and thought “how can I make this look really nice?” ….. This stuff worked, and made my vision come to life. Super cool. Super cheap for the quality and outcome.

When i received this kit, one of the bottles had liquid in it that was cloudy. I thought maybe it had gotten chilled during shipping, but keeping it at room temp for a day made no difference. So i submerged the whole bottle (tightly capped) into water that was 170 degrees F for 2 or 3 hrs. The cloudiness went away, and the cloudiness has not returned even at room temperature (68-72F). Hopefully this will help people who think they got a defective product.

Worked well, easy to follow directions. Simple to use.

The instructions are very clearly translated from a different language based on the grammatical errors present. The product itself is simple enough to use without reading them, though. It will ALWAYS cure completely within 24 hours as long as you do the following: A: Mix equal parts of A and B (by VOLUME, not WEIGHT) otherwise it will never harden completely. B: Stir until it looks blended enough, then stir some more to make sure, otherwise it will not harden in certain parts. C: Do not mix in cheap plastic containers or any containers you plan on using for anything except resin pours, as this stuff heats up when curing, and is very hard to clean off surfaces once cured (although it is very easy to clean as a liquid) It will stay as liquid for ~20 minutes after mixing, then will slowly gel and solidify over the next 24 hours. Do not mess with it until 24 hours have passed, as it may not be completely cured in the bottom or middle of your project. When it dries fully it is very tough, it took a few good swings with a hammer to shatter a small test chunk I had made. It is also perfectly clear once it hardens, and bubbles are not an issue unless you are making taller/thicker resin pours, as the product stays liquid for long enough to allow bubbles to escape naturally from smaller setups. Even with colorants added (food coloring/acrylic paint in very small amounts) it still set up completely, it just took much longer to cure. Using resin-compatible dyes would solve this but I had to use what I already had on-hand. Additionally, this stuff is kind of sticky but that is to be expected of any product like this, and this product is actually very easy to clean up as long as it has not begun to harden. All in all, besides the lack of quality control regarding the instruction booklet, this two-part resin is great for small craft projects and repairs, and I'd definitely recommend it if you don't need a large quantity of resin. If you plan on using this kind of stuff frequently, I'd recommend buying larger containers.

السعر مناسب

لأنه حلو

Für das ich absoluter Neuling bin was epoxidharz betrifft, hat alles auf Anhieb geklappt ! Tolles Ergebnis

Amazing resin very happy

Easy to use , excellent results , good quality and price