• Driven part of the terminal supply area Vs: +5 V-+35 V; such as the need to board to take power, the Vs power supply range: +7 V ~ +35 V-.
• Logical part of the terminal supply area Vss: +5 V ~ +7 V (can board take power +5 V).
• Maximum power consumption: 20W (temperature T = 75 ℃).
• Control signal input voltage range:Low:-0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss.
• Drive part of the peak current Io: 2A.

• Imported from USA.

Product parameters: 1.A driver chip: dual H-bridge DC motor driver chip 2.driven part of the terminal supply area Vs: +5 V-+35 V; such as the need to board to take power, the Vs power supply range: +7 V ~ +35 V- 3.drive part of the peak current Io: 2A 4.Logical part of the terminal supply area Vss: +5 V ~ +7 V (can board take power +5 V) 5.logical part of the operating current range: 0 ~ 36mA 6. Control signal input voltage range: Low:-0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss 7.Enable signal input voltage range: Low: -0.3 ≤ Vin ≤ 1.5V (control signal is invalid) High: 2.3V ≤ Vin ≤ Vss (control signal) 8 Maximum power consumption: 20W (temperature T = 75 ℃) 9.Storage temperature: -25 ℃ to +130 ℃ 10.Driver Board Size: 55mm * 49mm * 33mm (with fixed pillars and the height of the heat sink) 11 driver board Weight: 33g 12 other extensions: Control the direction indicators, the logical part of the board to take power interface. Instructions for use: The stepper motor drive: The board of ENA and ENB is high, where the level is TTL level. ENA is the A1 and A2 to enable end of ENB B1 and IB2 enable end. BJ then the public side of the stepper motor. Packing included: 1x motor driver board