DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL

Works perfectly. Flashed four ESP8285 devices with ESPHome the first day I got it and had absolutely no problems. I bought a cheap programmer directly from a Chinese reseller website and spent hours debugging issues before I concluded it was a bad programmer; this FTDI adapter immediately fixed my issue. Worked without additional configuration when plugged into my laptop running Bazzite Linux. Instructions include a QR code for Windows drivers, which I installed then tested this adapter to confirm it works on a Windows machine as well.

Not much to say - does what it says on the tin. Easy to use, comes with everything you need. In my case I needed a short USB extension cable to accommodate the size, so I recommend a short one to accompany your purchase if you intend on using the neighboring USB port.

This is a high quality item that works flawlessly

I needed to connect to a serial device that operated at an unusual baud rate, and bought a number of USB/UART converters. This one is hands down the best, probably because it uses a real FTDI chip. Problems that I have had with other converters: (1) problems with higher-speed and non-standard-speed communications, (2) vcc problems (voltage not matching 3.3V, and dropping further with the slightest current draw), (3) difficult-to-read labeling. This converter worked flawlessly the first time. It has a convenient ribbon cable which is extremely helpful. It has a selectable voltage from 1-5 volts, and I believe (based on some data sheets) that I was consuming 250 mA at 3.3V. Anyway, despite the fact that it is a bit pricy, it just worked, which ultimately saved me a lot more money than the cheap ones. I liked it so much I ordered a second one.

Worked well. I like the configuration for input voltage for logical "1"

Works as advertised no Problems yet. Look and feels appropriate. Reasonable

I’ve never had to flash an esp8266 using UART pins before, but this just worked. Just reference whatever new ttyUSB device you see once it’s connected with esptool, and away you go! Nicely made, decent instructions, recommended.

This serial adapter is awesome. It's plug and play with Windows 11 (my old one wasn't and wouldn't work anymore). The multiple voltages are awesome. It comes with a jumper for a loopback by default and has an adapter cable with it. It's everything you could dream of in a serial adapter.

Le produit est livré dans petit paquet a bulle. Rien ne manque, les câbles, les jumpers, la notice, et le module sont présent. Le module est protégé dans un joli boitier transparent parfaitement adapté et solide. Il n'a pas été reconnu directement sous Win10 et j'ai du télécharger les drivers sur le site indiqué dans la notice. Je m'en suis servi pour programmer un module ESP8266 et tout a fonctionné du premier coup. Je suis donc satisfait de mon achat.

This is a great device for working with SBC's. In the past I'd used a hacked up RS232 cable but this is easier and more flexible.

Genuine FTDI chip, works with any recent kernel, tested on Arch linux, kernel 6.6.3: $ dmesg [102592.385830] usb 2-1.8.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [102592.385840] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [102592.385844] usb 2-1.8.1: Product: FT232R USB UART [102592.385848] usb 2-1.8.1: Manufacturer: FTDI [102592.385850] usb 2-1.8.1: SerialNumber: B001AI5K [102592.426436] usbcore: registered new interface driver ftdi_sio [102592.426453] usbserial: USB Serial support registered for FTDI USB Serial Device [102592.426590] ftdi_sio 2-1.8.1:1.0: FTDI USB Serial Device converter detected [102592.426634] usb 2-1.8.1: Detected FT232R [102592.428027] usb 2-1.8.1: FTDI USB Serial Device converter now attached to ttyUSB0 $ lsusb Bus 002 Device 012: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC

Prodotto di qualità. Ne ho provati di convertitori le classiche cineserie da pochi euro ed ho sempre avuto problemi soprstutto con hardware che aveva bisogno della 3v tutti gli adattatori avevano problemi ad alimentare con questo devo dire che ho risolto tutti i miei problemi non sbaglia un colpo ed è affidabilissimo.

firmware update に使えて便利です。