WALI Triple Monitor Mount for 13-32 inch Screens, up to 17.6 lbs per Arm | Adjustable 3 Monitor Desk Mount with Swivel, Tilt, Rotation, Triple Monitor Stand for Desk, VESA 75/100mm (GSDM003), Black

I'm absolutely loving this triple monitor mount from WALI! I was a bit skeptical about the installation process, but it was surprisingly easy. The instructions were clear, and the whole thing took me about 30 minutes to set up. The build quality is top-notch - the arms are sturdy, and the gas spring mechanism makes it easy to adjust the monitors to the perfect height. My three 27" monitors fit perfectly, and the whole setup looks super sleek on my desk. My productivity has skyrocketed with this mount - I can have multiple windows open at the same time, and the extra screen real estate has been a game-changer. Highly recommend.

This mount is extremely high quality, solid and well built. Impressed with the stability, ease of installation, gas spring quality, and full range of motion, including ability of rotation (landscape to portrait). I’m not sure how much better a “more expensive” mount could get (maybe slightly better cable management, as this mount still allows cables to be slightly seen). This mount worked perfectly for my three 27” curved monitors. Note: My monitors have virtually no bezel, so I was able to spread the arms out enough to maintain the perfectly joined panoramic curve between all three monitors. *However I do believe other 27” curved monitors with thicker bezels may experience difficulty. These mounting arms could be double…Even triple the cost, and the quality alone, in my opinion, would make this worth it. Do yourself a favor… Ditch the monitor stands, and purchase these arms!

I got the WALI triple monitor mount that says it’s for 13–27 inch screens but I’m using it for three 28 inch curved monitors and yeah I definitely had to get a little creative with the setup because the sizing they list is accurate and the curves make it a bit awkward at first, but once I figured out the angles and tightened everything down it actually holds them really well, I’ve had this thing up for like six months now with zero issues besides tightening the bolts one time, it’s sturdy, doesn’t sag, and honestly does the job better than I expected for something not technically meant for my exact size.

I bought this along with three 24in Spectre monitors a couple weeks back so my experience is based on that. A person with different sized monitors might have a different experience. I was impressed on how easy it was to assemble. First, you decide on how you want to attach the stand as there are two methods to do so, either clamp or grommet. I chose the clamp and haven't had problems. It's pretty sturdy and holds the monitors well. Second, the branching arms are a single piece that slides right onto the main pole and fastened by a socket head bolt. Hex keys are provided. Then you fasten the middle apparatus that will hold the middle monitor. After you attach the brackets to the monitors and place the monitors onto the mount, which you then fasten with socket bolts to keep the monitor from falling. It's pretty simple and the mount is sturdy. I also liked that it was designed in mind to help with cable management. The cables are held together under the arms by a piece of metal that slides and hooks onto the arms, it's really clever. However, it becomes tedious to hook back on with more than 3 cables (I had two hdmi and power cord). The gas spring was nice and simple to use. You use the hex key to turn the socket bolt on the arm clockwise or counter clockwise. This causes the arm to move freely or stay in place firmly, depending on how heavy your monitor is. In my case, each monitor is light so when I used the default settings, it required a bit of strength to move the arms up and down. I fully rotated the bolt 3 times clockwise. This allowed me to move the arm freely. Lastly, the tilt and range of motion of each arm is great. The tilt at the end of the arms is control by another socket bolt and easily changed. As for the range of motion, the arms can move around greatly but I believe can be limited if you have a larger monitor size. Things to note: -no extra tools necessary, everything is included -desk thickness is important so make sure to measure your deck before you even consider buying it -monitor and brackets may not be compatible (in my case, the monitors have a metal bracke sticking out directly in the middle where the flat bracket would be placed. Thankfully, Spectre included spacers with their monitors so all I had to do was attach the spacers and install the bracket onto them) -instructions were easy to follow, but the labels that appeared on the bolts and washers did not match the instructions. Not a big deal as there that many parts but still something I noticed

i bought it for the additional height of the side monitors and it is exactly as i expected. It has significantly cleared desk space for me along with that the mounting brackets it uses makes it relatively easy for you to add or remove monitors without having to take the whole thing apart like my last double monitor mount. The packaging and instructions are very clear and are pretty much self explanatory, and the mount comes with absolutely everything you need including mounting screws, stand offs, and plenty of extras. the mount itself is very lightweight but sturdy, and the arms are ease to move but hold your monitors in place very well. for the price i got it at, it was the absolute best price for a 3 monitor mount with vertical adjusting arms. the over all look of the mount is very good, but that only after i added my own cable management with zip ties surely it wouldn't have been too much more for them to add additional cable management for the side arms this is really the only area of improvement that i can critique. along with that I am really not a general fan of gas arms,, they work fine and seem to hold in place solely due to the weight of your monitors, my main gripe about it, is how long are these things expected to truly hold up, solid metal just does way better even if its heavier, it lasts longer

The wife had to 2 monitors on a height motorized desktop, taking up space. I need her to make more money so I looked for options on giving her a third monitor and at the same time gain desktop space. Plus she brags about being a multitasker so I'm putting that skill to the test. It all fit perfect, easy install, durable. Now let's see if the income changes. Buy with confidence, now I want one for myself.

Been using this mount for years and it is AMAZING! It gives me so much extra desk space (even though it is messy right now lol) but its super nice to have. Its very clean and easy to setup and its beautiful. You can arrange the monitors in pretty much any way you want and they are very simple to adjust. Compatible with any VESA mounted monitor and its very versatile. Works perfectly and has been for over a few years.

This product is well made, sturdy, and not hard to assemble. My issue for this is that there is a fair amount of play or wiggle in each monitor and the arms themselves when it is all put together. The two side arms are connect to the center post via a collar that you tighten. Even when this is very very tight, moving one of the monitors tends to swivel the other one as the collar slips on the post. The collar has a nylon (or some kind of plastic) inner layer that allows it to slide up and down when you loosen the collar, but this also allows it to twist when you don't want it to. This makes me avoid moving the monitors because moving one can move the other and it just seems like a hassle. If there was a nonslip material there at the collar, then it wouldn't twist, but it would also be harder to move up and down (which you probably don't do anyway). I'm thinking of putting something, either a thin piece of sandpaper or something rubbery and grippy in that gap to stop the twisting. If the post and collar had some kind of groove and key, it would also stop the twisting, but that would be more expensive to manufacture than the simple round (and very sturdy) post. The post doesn't swivel on the base clamp because there are 3 screws there, which is good! In a similar way, the monitors also have a bit of play where they meet the arms, even when they are screwed in with the provided screw. This is less of an issue, but it would be nice and a higher quality product without that play The center monitor is about 3 inches from the post on its mount. This extends over the desk more than I'd like. It height and tilt and angle adjustable, which some folks might like, but I'd like it to be further back against the post, even if that meant it was only height adjustable. There's no way to push it further back against the post. My 3 star rating is because of the unwanted swiveling of the monitors, the monitor play, and the center monitor protruding out. The product is sturdy, and functions as designed. If you're buying this, consider that if the monitors are all in a straight line parallel to each other, and your desk is against a wall, the elbows of the arms protrude back. They may run into the wall (depending on your monitor size). Just something to think about. I put mine at angles facing in, so that isn't an issue, and the elbows don't hit the wall. In a

Purchased this product after some research and can confidently say that this is the best upgrade to my desk so far. The entire setup is very sturdy and holds all the screen in place without any sagging of the screen. I did have to make a few modifications to one of the screen plates as it was not compatible with one of my screen or maybe my screen was not compatible with the plate. Additionally, drilled holes into my laptop stand which is now connected to one of the arms as per the picture. Overall the quality of this product is pretty awesome for the price you are paying. Would recommend :) Thank you seller.

Article conforme et robuste Reçu en retard mais satisfait

Desk is metal frame with manufactured wood top. Frame is inset just far enough that bracket couldn't fully go over it, and clamping only the wood wasn't very secure. (I also used the Wali reinforcement plates, ASIN B093F95VTC, but that wasn't enough weight distribution) I ended up drilling through the frame and top, and grommet installing. Bottom reinforcement plate went between frame and top, top plate on top. Very secure, doesn't feel like it'll break off! Easy to configure, decent cable management, holds my 27" and 2x24" monitors easily. Plenty of hardware included (FOUR sets of VESA screws, plus washers, and standoffs if necessary!), clamping device is heavy duty, desk will definitely give out before this does! One small complaint: the knob that holds the assembly to the desk is just BARELY long enough. Because the tube's threads are inset a bit, it took some finagling to get it to start to thread. Almost gave up!

... material resistente, firme, bem elaborado, muito util para liberar o espaco das bases dos monitores na mesa.

Es un buen producto, quedo perfecto para los 3 monitores que necesitaba montar, uno de 19, 27 y 24 pulgadas, los soporta sin ningún problema y sin hacer ningún tipo de "juego" ya montados. Los materiales se sienten resistentes y de buena calidad desde el momento del desempaque. Me tarde mas o menos una hora y media en instalar este brazo, las instrucciones de armado son fáciles de entender aunque hay algunos puntos que no son del todo claros, pero nada que te impida armarlo por ti mismo. Una vez instalado libera una buena cantidad de espacio de tu escritorio, lo que se hace que se vea limpio y ordenado, tiene muy buen rango de movimiento por lo que podrás ajustar sin problemas los monitores a tu gusto, cada brazo tiene un especie de canal que sirve para ocultar los cables de video y corriente y tener una mejor gestión de estos. Ya una vez montados los monitores estos no se mueven para nada ante movimientos bruscos del escritorio, por lo que se mantienen fijos en su posición, a pesar de eso, se puede ajustar la altura, por ejemplo, con mucha facilidad sin necesidad de aplicar mucha fuerza, también dependerá de como ajustes el nivel de tensión los brazos, ya sea para monitores pesados o ligeros. Este es el único punto negativo que yo le encuentro a este producto, ya que uno de los tornillos de ajuste para la tensión estaba totalmente apretado y no pude mover hacia ninguna dirección, pero aun a pesar de eso, no he tenido ningún inconveniente con el monitor de ese lado. En general me parece un excelente producto por su precio, se siente de calidad y es bonito, hace que el escritorio luzca mas limpio y es fácil de instalar y ajustar. El único punto que deberías de tomar en cuenta para este soporte en su base de fijación , ya que si tu escritorio es muy grueso o tiene algún tipo de tubo o estructura como el mío quizá sea difícil de instalar, ya que tiene un cierto limite de apertura para ajustarlo al escritorio. En las fotos se puede como queda ya instalado. 100% recomendado! :)