WALI Triple Monitor Mount for 13-32 inch Screens, up to 19.8 lbs per Arm

i bought it for the additional height of the side monitors and it is exactly as i expected. It has significantly cleared desk space for me along with that the mounting brackets it uses makes it relatively easy for you to add or remove monitors without having to take the whole thing apart like my last double monitor mount. The packaging and instructions are very clear and are pretty much self explanatory, and the mount comes with absolutely everything you need including mounting screws, stand offs, and plenty of extras. the mount itself is very lightweight but sturdy, and the arms are ease to move but hold your monitors in place very well. for the price i got it at, it was the absolute best price for a 3 monitor mount with vertical adjusting arms. the over all look of the mount is very good, but that only after i added my own cable management with zip ties surely it wouldn't have been too much more for them to add additional cable management for the side arms this is really the only area of improvement that i can critique. along with that I am really not a general fan of gas arms,, they work fine and seem to hold in place solely due to the weight of your monitors, my main gripe about it, is how long are these things expected to truly hold up, solid metal just does way better even if its heavier, it lasts longer

Do not come into this thinking that it is going to be a quick 30 minute Job. If you take the time you can dial this mount in and really make it work wonders for your set up. I have an IKEA desk that has drawers and a metal frame around the desk this made my overall desk height about 5 inches. I had to custom make a bracket out of a 2X4 the screws for the bracket are M6 x1.0 for anyone interested and a simple 1/4x20 bolt and nut can hold the bottom of the clamp to the wood. the directions are easy to follow and the cable management is very nice and can make everything seem as if the cables don't exist ( I was too lazy to do this so some cables still show. overall for 1/3 the price of bigger competitors it really holds up well. each arm holds 15 pounds and can be adjusted for spring. The monitor on the left weighs 7 pounds but has an additional metal bracket to hold my Mac mini behind it and all the wires. bringing the weight to around 12-13 pounds. No drop or issue with this arm. Great product

The wife had to 2 monitors on a height motorized desktop, taking up space. I need her to make more money so I looked for options on giving her a third monitor and at the same time gain desktop space. Plus she brags about being a multitasker so I'm putting that skill to the test. It all fit perfect, easy install, durable. Now let's see if the income changes. Buy with confidence, now I want one for myself.

This is one of those purchases I’m genuinely glad I made, even if it’s not perfectly optimized for my current setup. My desk is a classic, compact style—think high school desk—which makes the mount functional but not ideal in terms of positioning. That said, the mount itself is impressively versatile. It’s compatible with virtually any desk type, and the central pole can accommodate other swivel arms if needed. I’m currently using it to support two 27" monitors and a 32" curved center display. It does work—but the reach and flexibility of the side arms can feel a bit limited when trying to position the 27" screens exactly how I’d like. Bottom line: it’s a solid, adaptable mount with great potential—just be mindful of your desk size and monitor dimensions before purchasing.

Nice and sturdy, took a little bit to assemble but holding up well 2 monitors on of 6 LB each arm... no issues.

I'm absolutely loving this triple monitor mount from WALI! I was a bit skeptical about the installation process, but it was surprisingly easy. The instructions were clear, and the whole thing took me about 30 minutes to set up. The build quality is top-notch - the arms are sturdy, and the gas spring mechanism makes it easy to adjust the monitors to the perfect height. My three 27" monitors fit perfectly, and the whole setup looks super sleek on my desk. My productivity has skyrocketed with this mount - I can have multiple windows open at the same time, and the extra screen real estate has been a game-changer. Highly recommend.

I got the WALI triple monitor mount that says it’s for 13–27 inch screens but I’m using it for three 28 inch curved monitors and yeah I definitely had to get a little creative with the setup because the sizing they list is accurate and the curves make it a bit awkward at first, but once I figured out the angles and tightened everything down it actually holds them really well, I’ve had this thing up for like six months now with zero issues besides tightening the bolts one time, it’s sturdy, doesn’t sag, and honestly does the job better than I expected for something not technically meant for my exact size.

This product is well made, sturdy, and not hard to assemble. My issue for this is that there is a fair amount of play or wiggle in each monitor and the arms themselves when it is all put together. The two side arms are connect to the center post via a collar that you tighten. Even when this is very very tight, moving one of the monitors tends to swivel the other one as the collar slips on the post. The collar has a nylon (or some kind of plastic) inner layer that allows it to slide up and down when you loosen the collar, but this also allows it to twist when you don't want it to. This makes me avoid moving the monitors because moving one can move the other and it just seems like a hassle. If there was a nonslip material there at the collar, then it wouldn't twist, but it would also be harder to move up and down (which you probably don't do anyway). I'm thinking of putting something, either a thin piece of sandpaper or something rubbery and grippy in that gap to stop the twisting. If the post and collar had some kind of groove and key, it would also stop the twisting, but that would be more expensive to manufacture than the simple round (and very sturdy) post. The post doesn't swivel on the base clamp because there are 3 screws there, which is good! In a similar way, the monitors also have a bit of play where they meet the arms, even when they are screwed in with the provided screw. This is less of an issue, but it would be nice and a higher quality product without that play The center monitor is about 3 inches from the post on its mount. This extends over the desk more than I'd like. It height and tilt and angle adjustable, which some folks might like, but I'd like it to be further back against the post, even if that meant it was only height adjustable. There's no way to push it further back against the post. My 3 star rating is because of the unwanted swiveling of the monitors, the monitor play, and the center monitor protruding out. The product is sturdy, and functions as designed. If you're buying this, consider that if the monitors are all in a straight line parallel to each other, and your desk is against a wall, the elbows of the arms protrude back. They may run into the wall (depending on your monitor size). Just something to think about. I put mine at angles facing in, so that isn't an issue, and the elbows don't hit the wall. In a

Purchased this product after some research and can confidently say that this is the best upgrade to my desk so far. The entire setup is very sturdy and holds all the screen in place without any sagging of the screen. I did have to make a few modifications to one of the screen plates as it was not compatible with one of my screen or maybe my screen was not compatible with the plate. Additionally, drilled holes into my laptop stand which is now connected to one of the arms as per the picture. Overall the quality of this product is pretty awesome for the price you are paying. Would recommend :) Thank you seller.

Article conforme et robuste Reçu en retard mais satisfait

Desk is metal frame with manufactured wood top. Frame is inset just far enough that bracket couldn't fully go over it, and clamping only the wood wasn't very secure. (I also used the Wali reinforcement plates, ASIN B093F95VTC, but that wasn't enough weight distribution) I ended up drilling through the frame and top, and grommet installing. Bottom reinforcement plate went between frame and top, top plate on top. Very secure, doesn't feel like it'll break off! Easy to configure, decent cable management, holds my 27" and 2x24" monitors easily. Plenty of hardware included (FOUR sets of VESA screws, plus washers, and standoffs if necessary!), clamping device is heavy duty, desk will definitely give out before this does! One small complaint: the knob that holds the assembly to the desk is just BARELY long enough. Because the tube's threads are inset a bit, it took some finagling to get it to start to thread. Almost gave up!

... material resistente, firme, bem elaborado, muito util para liberar o espaco das bases dos monitores na mesa.

Es un buen producto, quedo perfecto para los 3 monitores que necesitaba montar, uno de 19, 27 y 24 pulgadas, los soporta sin ningún problema y sin hacer ningún tipo de "juego" ya montados. Los materiales se sienten resistentes y de buena calidad desde el momento del desempaque. Me tarde mas o menos una hora y media en instalar este brazo, las instrucciones de armado son fáciles de entender aunque hay algunos puntos que no son del todo claros, pero nada que te impida armarlo por ti mismo. Una vez instalado libera una buena cantidad de espacio de tu escritorio, lo que se hace que se vea limpio y ordenado, tiene muy buen rango de movimiento por lo que podrás ajustar sin problemas los monitores a tu gusto, cada brazo tiene un especie de canal que sirve para ocultar los cables de video y corriente y tener una mejor gestión de estos. Ya una vez montados los monitores estos no se mueven para nada ante movimientos bruscos del escritorio, por lo que se mantienen fijos en su posición, a pesar de eso, se puede ajustar la altura, por ejemplo, con mucha facilidad sin necesidad de aplicar mucha fuerza, también dependerá de como ajustes el nivel de tensión los brazos, ya sea para monitores pesados o ligeros. Este es el único punto negativo que yo le encuentro a este producto, ya que uno de los tornillos de ajuste para la tensión estaba totalmente apretado y no pude mover hacia ninguna dirección, pero aun a pesar de eso, no he tenido ningún inconveniente con el monitor de ese lado. En general me parece un excelente producto por su precio, se siente de calidad y es bonito, hace que el escritorio luzca mas limpio y es fácil de instalar y ajustar. El único punto que deberías de tomar en cuenta para este soporte en su base de fijación , ya que si tu escritorio es muy grueso o tiene algún tipo de tubo o estructura como el mío quizá sea difícil de instalar, ya que tiene un cierto limite de apertura para ajustarlo al escritorio. En las fotos se puede como queda ya instalado. 100% recomendado! :)