OverMolded Rubber Grip w/Finger Grooves for Beretta 92/96 Series

I love this pistol grip! It's great quality and fits perfectly. If I ever need another one, I will come back here to get it. I've had mine for several years and it's still holding strong. Also, there are finger groves in the grip for more comfortable shooting. I definitely recommend this.

Picked up a set of these Hogue finger-groove style grips along with some of the regular Hogue rubber grip "panels" for my Beretta 92FS Police Special (US Made). I first installed the panel style grips because they were what was most familiar to what I was used to (see my review on those on the other product page), and then I installed the finger-groove grip, and WOW!!!! I tell you what, at first when I was reading everyone's reviews, seeing them say, "It makes the gun feel like it is a part, or an extension of your hand.", I really didn't take it much to heart, because I don't believe anything until I know for myself, and I tell you what, I SHOULD HAVE PURCHASED THESE GRIPS A LONG TIME AGO!!! Do yourself a favor, if you have a Beretta 92FS or M9 and are looking for something different than the factory grips, and want more comfort, control and ergonomics, PICK UP A SET OF THESE GRIPS! Trust me you will NOT be disappointed. Before purchasing the grips, I was sort of put off by the fact that I didn't know if they would be any wider than the factory grips, as the Beretta 92FS/M9 is already a hefty gun, but I am here to tell you that they really do NOT add any noticeable width. Some people worry about these grips changing up the grip position too much therefor causing a person to have to "re-learn" that gun, but really, they don't change your grip position any meaningful amount unless you have a totally funky way of holding the gun. They just create the most comfort and control you will ever have with your Beretta. Some people raise an issue stating, "Once you draw your firearm with these grips, you won't be able to easily change your grip position because of the rubber wanting to "grab" your hand.", and really, that's not the case. You can still adjust your hand a little if you need to, but when you get this grip on your gun and get used to handling and drawing your firearm with this grip, your hand will always automatically go to where it needs to be on the grip, and you won't have to fudge around with your grip at all, because after all, when you have to draw your firearm when it really counts and you absolutely CAN NOT move the sight line because you have a "bad guy" in your kill zone, if you've already drawn your gun, in most cases it's time to SHOOT, not to fiddle with your grip. Unless of course you are a L.E.O. and will commonly have to draw on a subject without firing, but even then you will be used to the grip and you will not have to adjust your position. The material these grips are made out of is JUST soft and tacky enough to give you the grip and control you need, without being "over-soft" or too tacky to catch on clothing or impede drawing your firearm, even from under a shirt/jacket if you are carrying concealed (though I don't know many people to use a full-size Beretta for their CCW, lol). If you are looking for something to enhance the grip of your Beretta 92FS's/M9's, you need to pick up a set of these grips, you will NOT be dis-satisfied.

This molded rubber grip is a game changer. I ordered it for my 96D Beretta to replace the hard plastics that came on it, and it totally changed the feel and look. It arrived a couple days late and Amazon took notice and refunded my shipping cost without me even saying anything. I would recommend this grip for anyone looking for a more comfortable feeling piece, the quality is top notch.

First frame perfectly. Greatly improves grip.

READ THIS - WILL NOT FIT a Taurus PT-92 or PT-99 with the ambidextrous decocking lever. I'm leaving a lengthy review because it wasn't easy for me to find the right Hogue replacement grip for my early 1990's Taurus PT-92 AFS. This one did not fit. My PT-92 has an ambidextrous decocker lever on both sides (IMPORTANT) of the frame. Push the lever up to engage the Safety, push it down to decock the double-action firing hammer. First I ordered this listing (Hogue model #92000) with the wrap-around front finger grips. The listing says it fits a PT-92 and PT-99. IT DID NOT FIT MINE. The screws lined up fine on the right side grip, but because my gun has the ambidextrous decocker the top screw hole on the left side of my gun did not line up with the hole in this Hogue #92000 grip. The top hole in my gun's left side is 1/2" lower than on this Hogue #92000 grip. So I returned it to Amazon, with no problems. If your gun doesn't have a decocker, I can tell you I LOVE the front wrap-around finger grooves of this Hogue #92000 grip, and wish I could have kept it. I spent a LOT of time looking for a different Hogue model that would fit my Taurus PT-92 and its ambidextrous decocker. but I could not find one. It does not appear Hogue makes a replacement grip with wrap-around front finger grooves for a PT-92 with a decocker lever. I'm guessing a PT-99 owner with the decocker would have the same problem. So I ordered a different Amazon listing - the Hogue Rubber Grip model #99010, which comes with 3 grip panels - 2 Left and 1 Right so it fits a PT-92 or PT-99 either with or without a decocker lever. A gun without the decocker has the screw hole 1/2" higher than mine. I installed the Hogue Rubber Grip model #99010 (different listing than this one) right grip, and the correct left grip for the decocker, and threw the other left grip away. THEY FIT LIKE A GLOVE! I love them. It makes my old gun look current again. And I love the rubber coated grips so much more than the original hard wooden grips. I used the same stainless screws that were original with the gun. I thought about switching the screws to black, but mine is a stainless frame and the stainless screws in the black Hogue grips look really good with the stainless frame. If you're going to change out the screws, DO NOT lose the bushings in the frame that the screws go in to. Lots of reviews mention big problems if you lose a frame bushing. See the picture. This is the best $15 I HAVE EVER SPENT on an old gun. Worth every penny, and took about 60 seconds with a flat-head screwdriver to change the grips ... Note the Left side grip screw locations in my photo. The other grip in the picture is the one included in this set for a gun without the decocker, where the screw is 1/2" higher on the grip. The higher screw hole on the grip sitting next to my gun, not on my gun, is the same as the screw hole that was on this listing's Hogue #92000 grip. If you don't have the decocker, you can use either model. If you do have the decocker, search on Hogue Rubber Grip model #99010 and buy that one instead. I hope this saves you some time. Good luck. Happy shooting.

I recently added a rubber grip to my Beretta 92FS, and overall I’m pretty happy with it. It feels really good in the hand and gives a more secure, comfortable hold while shooting. The added texture definitely improves control and makes it feel like I have a better grip on the firearm. That said, the grip does add a bit of bulk. Because of that, it’s a little harder to reach and operate the safety and use the slide lock smoothly. It’s not a dealbreaker, but it’s something to keep in mind depending on how you use your firearm. Overall, for range use and general shooting, it’s a solid upgrade and improves handling quite a bit.

I am really a fan of the traditional Beretta grips, but my father, who I regard as a gun connoisseur, strongly advised me to give rubber grips a shot (no pun intended). I was skeptical at first as I've never had rubber grips on any of my firearms. I was pleasantly surprised when I received this product, as soon as I removed it from the packaging. They are indeed rubber, but they are firm and feel as though their made of high quality. I installed them on my Beretta 96a1, and instantly appreciated the upgrade. The groves for your fingers are outstanding and perfectly aligned. I have large hands (2XL gloves), and typically customized products made for "normal" sized hands, I have issues with. These finger groves are large enough to accommodate bigger or smaller hands. I'm not sure if it's in my head or if the grips actually directly enhanced my shooting, but I shot better (not a huge improvement, but noticeable) and more comfortably. The fit of the grips is absolutely perfect, and overall, they really make an already enjoyable shooting gun, more enjoyable. I recommend them.

Ok, so I have tried various grips including the stock plastic Beretta ones, Uncle Mikes rubberized and the walnut Beretta ones and have never been happy with the feel of the weapon in my hand. The Hogue rubber wrap around with the finger grooves actually makes the weapon feel like an extension of my body vs. just holding it in my hand. The feel is incredible and it's much better in the higher temps because it does not get slippery with sweat. It does add a little girth to the grip so keep that in mind if you have tiny hands. Without a doubt I would recommend this grip, it is made well, fit and finish is excellent and it's priced very fairly. Personally I think this is the cheapest and best upgrade that can be made to this particular weapon. I recently installed the Hogue AR15 grip on my AR and am equally as happy as this one! Buy this grip and make your hands happy!

Die Produkte von Hogue sind einfach gut, aber das Gefühl die Waffe mit diesem neuen Griff in der Hand zu halten.....unbeschreiblich, eine Verbesserung um 100%.

The grip feels so much better than the original Beretta grip. I have average male hands, and it fits like a glove on my gun! So happy with this purchase.

Better grip using this product vs the OEM grips. A+

Love the Hogue grips and they seem to fit perfectly. This is our second set. These handguns should come with these from factory.

Allows me to control the gun better and have a grip unlike before. Fingers match up perfectly. Buy this. Fit gun perfect. 30 second install