YINTATECH 4'x2' Grow Tent, 48"x24"x60" High Reflective Mylar 600D with Waterproof Floor Tray for Hydroponics Indoor Plant Growing

Let me start by saying First this is my first grow tent for the price and the price point this was a great deal at a great affordable price. (Pro) Shipping was fast , packing was very well done , It is exactly what is advertised , Very sturdy , easy to assemble , Very little light loss if any , all air ducks are double seal tied and adjustable , very well made. (CON) Center divider could have been better made maybe a little more forethought and quality control in cutting and Velcro , Not great Assembly directions but readable could be a bit better. Over all this is a great product and I am pleased with it yes it could be a tiny bit better but for the price well worth it. I am using this with (2) BLOOMSPECT SL600 LED Grow Lights in the two small chambers and (1) MARS HYDRO TS 1000W Led Grow Light in the large chamber couldn't be more happy about the setup. I would buy this product again.

Love my tent. Just make sure u take proper measurements. 1st one I ordered was way too big for where I was going (my fault) this is second. Tent works great for price I probably should have gotten the taller one. Plants are growing so fast inside they might outgrow tent if I dont groom plants. (again, My fault) Tent put together easily enough. Instructions were mostly ok. Seems solid. Zipper is pretty decent. I feel like I will break it in a year or 2 of use. But so far holding up to me. Which is good. Im rough on things. Id buy it if u are on a budget and cant afford the bigger more expensive brands

Great value for the money. That being said lots of light leaks and snags from using to cheap of a material or maybe just poor design of the zippers light blocking flaps as they are extremly low thread count so you can literally see threw it. The reflective material and canvas are excellent quality and easy to work with. The instructions were for different size tents but close enough to figure out without hassle. The welds on the metal frame corners are amature at best but sturdy so far . overall great buy

Super simple assemble, 20 minutes start to finish...so simple the included instructions were not needed. Same quality as more expensive tents. Plenty of air vent/windows (3), plenty of double sock fan ports (5) (two sizes). Great reflective interior, hwavy canvas exterior. Heavy removable & easy cleaning tall side floor pan. The 3 light & accessory holding bars at the top are plenty strong enough for any grow gear you'll ever need....and all 3 can easily be adjusted front to back & side to side to accommodate any style of lights you may use. Excellent tent & great price & quality.

Great starter tent for those looking to grow indoors. Not a lot of space for multiple plants, but enough to get comfortable growing. I have 2 autoflowering plants going under a MarsHydro 600 light. This tent has no light leaks in my experience, and snugly fits a carbon filter and inline fan mounted inside. For the price, you won't find a better 2x2x4 tent. My only wish is that I went a little larger.

Light comes through all the way around the zipper. There’s pinhole areas not even close to the zipper that shine through. I had to put tape over them. Also, the zipper gets stuck. This might be fine for certain plants, but not for a marijuana grow. I like that it has metal poles and was easy to put together, but the canvas covering is not well-made at all. I would definitely not re-purchase this item. Once you get it set up it would be a mess to repackage and send back.

This is a VERY SMALL tent for trying to do a full grow schedule, and has LIGHT LEAK issues. Read through the questions and you will see all the answers, about issues. First off, figure out the layout of this tent, since its only 36" long total, and thats without the dividing of the 3 different sections. The main room when assembled, has a floor area of only about 22 inches. You can basically put in 2 5 gallon pots and there is really no room for a humidifier, or fan on the floor, let alone putting in a carbon filter up top, with a fan. A carbon filter, with the fan connected, and ducting, is about 29" long. I am going to make this work in the larger area by turning the filter sideways, and juggling the connection of the fan. The ducting can go out the top. Just saying, theres not much room in here for all your junk, even if you were just trying to do one plant. But here are the worst points of this tent. It LEAKS LIght, all over. The center panel that comes with it, is supposed to velcro hook on each side. Mine won't even reach to hook both sides as its too small, therefore, I can only hook the velcro on one side and the other is just open. The top of this panel also has gaps, so more light leak, and the bottom is about 3" too short. I am assuming they think by the time you put the removable trays in, it will come up to cover this gap......Furthermore, this center panels, velcro strips, on the sides of the tent, where it supposed to hook through, are about 2" into the smaller sections, when they should be lined up on one side of the center poles, thus needing more fabric to reach. They don't line up with the correct placement, after the poles/skeleton are inside. I can see light leaking around the zipper seams also. Its a very "tight" zipping tent, and fits tight around the poles. I am hoping the zippers hold without tearing. This tent, in my opinion, is really only good for seedlings, vegging, and maybe a mother or two in the main compartment, but NO FLOWERING, as there is light leaks all over and you will ruin your flowering plants with other lights in the other sections. Furthermore, The two small areas, don't have much headroom since this tent is only 53" tall, and those two sections are half this much, so you better invest in lights that have dimmer switches as they are not very far from your plants, even if you have them hooked right up to the bars. I suppose you could use this for "Autos", as maybe the light leaking wouldn't hurt them much. The two smaller sections are only good for seedling and starters. The sellers need to fix the center panel so that it fits right on all sides, with the velcro. It is way to small and cannot attach on all sides and other people are noting this in their comments.

I have used tents for around 7 years now. I've owned alot and have bought the cheapest to the most expensive like Gorilla grow tent. I have 2x4s, 4x4s, 3x6s, 5x5, and a10x10. I bought this tents to dry in and wasent expecting much. But I'm surprised what I got for the money. Zippers are smooth, poles are sturdy, fitment was perfect. And that's ever the case with lower cost tents. The bottom is actually a rubber and not just the same fabric as the tent witch I've never seen and is somthing I've always complained about. You can't get a better tent for the money. Vivosun is trash Gorilla is to expensive and the rest are all the same just a diffrent name. The only thing this dosent have is a viewing window witch I've never used in all my years anyway. I wrote this review hoping somebody new to indoor growing could bennifit from my experiences over the years. I'm mr.eastcoastgrow on IG if you wanna see it in action.

Buena calidad, se arma. Facilmente

El producto llegó incompleto. Le faltaron tubos para armarla por lo que la hace inútil.