5M LED TV Backlight USB Bias Lighting with 16 Colors and 4 Dynamic Mode for 65 to 75 Inch HDTV,PC Monitor,Led Light Strip

Arrived in 24 hours with prime. Packaged well and small enough to fit through a letterbox if you're out. For others information initially the four LED strips are joined together in one roll but they seperate easily. I started by plugging in the USB cable to the TV which has an AC/DC cable at the other end then attached the main LED strip which is where the AC/DC pin attaches into then placed the final three LED strips around the TV. For informative purposes my TV is 49" and the LED strips were adequate size wise. I cannot confirm for other sizes perhaps other reviews can help with that. Strips are nice and thin on a white backing strip. Adhesion so far seems fine. However from past experience the heating up of the rear of the TV can cause the adhesive to become less effective but for now, day one no issues. LED's are nice and bright absolutely no complaints there. The glow coming from them reflected on the wall behind is very soothing and not overwhelming. The remote is nice one of the nicer ones I have and I have quite a collection gathering now. It's very responsive and works well. None of the available functions aren't working or responding. It should be noted that brightness control only works when you have picked one static colour and it works well. Brightness cannot be increased or decreased when on smooth, fade, strobe or flash unfortunately. This is a far better set than the previous set I bought which developed not one but two faults eights months into use and are now fit for the bin as neither the seller or Amazon are willing to enforce the one year guarantee offered with them and this is why I purchased this set. I wish I'd purchased these in the first place everything about them is much better. I appreciate it's just day one but I'm happy and hopeful. I certainly give my seal of approval and I'm a very fussy consumer.

Still going strong years on. Great quality. Easy to use. Comes with a remote control but nice setting it on rotating colours. Does not reflect what is on the TV just random colours.

For the price, these LED backlights are a solid choice. They adhere securely to the back of the TV, and the flexible design handles corners without any issues with the lighting. The colours and modes work well, though I do wish they were a touch brighter. That said, for what they cost, it’s hard to complain. A budget-friendly way to add a bit of flair to your setup!

I love this product. It works perfectly, power being supplied from the USB on the rear of the TV. Comes on with the TV and goes off with it if you leave it on via the remote. Colours are great but depending on your wall colour will depend which you choose. I tend to pick one and leave it alone. Take some time to get it fitted equally over the back and sides. If you don't, the light will produce patches and not look great. Two things with regards to the remote sensor. Firstly, placing it so it's not under tension with the power cable is required. Just get it so it naturally sits flat on the rear of the TV. If not, the adhesive let's go after a few hours on this part, the rest remains fine though. If you set it so it sits flat, it stays stuck. Secondly, you don't have to have the sensor showing below the TV. I tested this before I fitted it. I thought it would look naff with that showing but I need not have worried, it works fine with the remote. The colour is not adaptive. You set a colour and it says that colour. It does not change with the TV picture like some standard features of some TVs. I know it may be obvious but just to confirm that.

My main telly is a 55" Sony 4K UHD HDR etc. etc. I recently bought a 42" Philips model which has "Ambilight" for the conservatory and I really like it. After checking out various options I chose this 2m LED TV Backlight USB Bias Lighting with 16 Colors and 4 Dynamic Mode for 40 to 60 Inch HDTV to fit on my Sony TV. The kit arrived quickly in a surprisingly small box. The kit comprises four LED strips, which were connected together in the box and so have to be separated, the remote sensor is attached to the end of one strip, three connecting ribbon cables, four spacing brackets, USB cable and easy to follow instructions with a useful troubleshooting section. After cleaning the surface at the rear of the TV and deciding where to fit the spacing brackets for the LED strips I went ahead and fitted the strips themselves, making sure all the direction arrows were pointing in the same direction. I did have to lift one strip at the top of the TV to reposition it slightly and the adhesive backing is showing no signs of coming unstuck. I then connected the small remote sensor to a spare USB port on the TV and switched on. The remote control works perfectly even though the remote sensor is out of sight on the rear of the TV. One thing I did find though was that one of the strips was showing a different colour to the other three. I checked the troubleshooting guide and realised I had reversed the polarity of one of the strips. This was easily rectified by disconnecting the strip, turning the plug on the ribbon cable over, reconnecting it and Bingo! All working. My TV is on a stand and sits about 18" from the wall, which is white in colour. The LEDs, even on their lowest setting still cast a pleasant hue. I prefer the 'smooth' dynamic setting which cycles through all available colours. This kit does not have the facility to follow the colours of the picture or the beat of music like the Philips Ambilight does. Such aftermarket kits are available which use a camera mounted on the TV, to monitor the colours on the screen and adjusts the LED's accordingly. I didn't want or need that level of funcionality. I love the simplicity of this kit and the pleasing results it gives. For less than a tenner, I think this is a no brainer upgrade.

Finde diese led Lichter toll ein Fernseher in der Wohnung fehlt noch aber wird auch bald bestellt

Ganz ok

Super einfach hinterm Fernseher an zu bringen und gemütlich beim Fernsehen schauen

Hab das komplett angeklebt am TV angesteckt und jetzt funktioniert die Empfängereinheit nicht. Kann ich auch abgerollt und angeklebt schlecht zurücksenden.

Gefallen hat mir die Helligkeit und das einfache anbringen an den TV. Wasser aber garnicht funktioniert hat ist das umschalten aus der Ferne mit der Fernbedienung. Der Empfänger ist hinterm tv und es kommt einfach kein Signal an außer wenn ich mich 20cm davor stelle, aber das bringt mir nichts wenn ich fürs umschalten immer wieder aufstehen muss.