VViViD XPO Gunmetal Grey Carbon Fiber 5 Feet x 1 Foot Car Wrap Vinyl Roll with Air Release Technology

I am a Novice with vinyl wrap and have not used any other brand besides VViViD so I can not make a comparison. For my project, I wrapped several interior pieces of new vehicle and used a couple types of VViViD vinyl. Each one of them appeared to be high quality and the Carbon Fiber pattern looks and feels authentic. It was very easy and forgiving to work with. I watched a couple how-to videos found on the internet and only had two failures that had to be done a second time. The redo's were not the fault of the product but rather my inexperience using the product. This wrap can be stretched a lot without deforming the Carbon Fiber pattern if you do it carefully and it sticks very well without the use of a primer. If you do find yourself needing to redo a wrapped piece but are not able to rewrap it then, at least remove the wrap from the piece. I decided to rewrap a piece about a week later and discovered the bonding material is very good. The vinyl does peel off later but the longer it is attached, the better it bonds. I had to spend extra time cleaning the glue off prior to rewrapping. The other item I decided to redo, I removed the wrap within a couple hours after wrapping and it came off with no issues and without leaving any glue behind. The end result looks great. I have had several people see the vehicle for the first time and thought it was original equipment. I am very happy with this product and find myself wanting to wrap everything.

I love the way you can work with this and it is forgiving. The colors is very nice. Air bubbles just disappear. Love this. Get a good heat gun and you'll love using this. I've used a lot of Vvivid products. They are always top quality. 5 of 5 every time!

It's a good product overall. Looks good on the car if you get it done right. Takes getting used to. I'd buy extra and try some of the easier things you want to do first. Applying heat makes it more flexible but it starts sticking fast. Too much heat and it blisters. You go from stretch to blister quickly if you use a heat gun so beware. Go easy with the heat. A regular hair dryer will work but is slow going. Doing panels and trim on the car isn't bad. Interior is pretty good. Doing wheels other than the flat part is difficult. I've done 2 sets of wheels now and it takes some time and doesn't like compound curves. I had to cover major areas then cut strips and shapes and apply in the areas not covered. Since it is a carbon fiber look you can line it up so it appears to flow. For what I wanted the cost is fine. Doing a full vehicle would be expensive and very time consuming. You'd have a lot of waste. All in all I'm glad I got it. The nice thing is when you don't like it you can just peel it off. Much easier to remove than Plastidip. Make sure your surface prep is done really well or you'll have places it won't want to stick. I think some surface prep material to help adhesion wouldn't be a bad idea but may make it painful to remove later. Sooner or later this stuff is going to come off.

im writing to hopefully help others with discerning the actual color.. without reference to any other color.. you would call this a dark silver out of the box, i know i did.. but once compared to an actual vvivid silver vinyl you can see the difference. see pictures . wrapped the door mirror covers of a silver gray scion. the middle picture is the silver vinyl vs this Gunmetal grey and finally the silver vs gunmetal vs black. i tired to show them in different light because does change depening on how it hits. hope this helps. Oh.. the vinyl works great... im absolutely no installer so someone else can maybe better review that.. this is my first install on what " I " would call a complex part.. only other things i have wrapped are laptops.. which a pretty much flat and pretty hard to mess up..

This is my first hood wrap. From highway driving my hood has a ton of paint chips and paint peeling. My wife said: THAT'S ENOUGH!!! So I bought this wrap. Cons: The wrap came in a long thin box and was bent. In the picture, you can see the impact on the wrap. I would have returned it but it is an old car and we just want to hide the hood imperfections. You can also see that when unrolling the wrap that there are creases that are outside of the bent area. If you are working alone and have not done this before you will most likely get frustrated (but this is not the wraps fault). I used some primer spray paint (and had it dry over a day) and when pulling back the wrap to re-adjust, it did pull up some of the paint from the primer. Be aware of this if you are looking for perfection as the paint is stuck to the wrap and may cause a small imperfection when laid back down on the car. Pros: The wrap seems thick. I had my two kids help and we were able to peel back the wrap MULTIPLE times and re-lay when getting rid of air pockets or lines. The wrap showed no signs of weakening (or tearing). This is what I liked most about the wrap. The 5'x7' was enough for my hood with enough play on each side (if you have a larger hood this may be a tighter fit). It accomplished my goal of making my hood look better. Summary: I would have given it a 4 but the product came in damaged. This could be protected by having a possible thicker box or a cardboard core inside the wrap rolling. If I was looking closer to perfection I would have returned the wrap for one that was not creased. The wrap itself was thick and able to accomplish the task at hand. While you can still see some imperfections in the front of the hood (not the wraps fault) the wrap makes the car look a lot better and I have even received compliments from strangers. Hope this review helps you

I could not wrap what I wanted. My vinyl application skills are very poor. The product is very nice but I could not get it on to the complex curves of a motorcycle gas tank. If you are new to wrapping, get plenty as you may end up making several tries. Fairly sticky ... seemed about right. If you can get it on without wrinkles it will look great.

Maybe I got a bad batch, but there is barely any tackiness and/or stickiness. This wrap literally falls off! I precleaned my interior parts so that they were oil free, peeled the backing off of a strip that I cut, placed it onto the part I wished to wrap and immediately knew this product was trash. It looks good and it is a bit stiffer than I would prefer, but IT WILL NOT STICK TO ANYTHING!!! I had my heat gun ready to go but I never got that far. This product is stiffer than it is sticky. I overlapped the edges by a whole centimeter and this product pops off of smooth, flat, clean surfaces. I simply cannot use it. Ease of use gets a 1 star due to failing to stay in place and stick as I worked the edges. Durability gets a 1 start as, well, the product immediately fell off.

Makes a difference

Nice item

Excellent product the shipping was fast and the installation was very smooth Took a little longer to install them expected but totally worth it

Excellent product. As advertised and arrived on time. Highly recommended. Will purchase again

Easy to install and looks great.

The venal wrap was exactly what was needed for my program.