Furinno PASIR 3-Tier Storage Shelves Bookcase, Book Shelf, Sonoma Oak

Unless it arrived damaged I truly cannot understand many of the negative reviews. This Furinno Pasir 3-Tier Open Shelf, Steam Beech arrived in a solid box, undamaged. It was very easy to assemble. Once assembled it appears very sturdy. Excellent value. If you follow the simple instructions carefully - screw tightly(!) and tack the back in correctly and firmly(!) around the edge and into the side and top panels (not the shelves as 'Vicki' did) - it leaves a very sturdy case, for under £24. With just 3 Parts (Part 1/3 = the 16 screws and Part 2/3 = the 22 tacks) what took me the longest to figure out was that Part 3/3 - the black clip thing - is not to attach to the bookcase, but instead a very helpful tack holder to help you tack the tacks into the backboard straight, and at the precise distance from the edge. Wonderful little tool! I feel pretty certain that if I stick to the recommended max. weight, this will remain sturdy for years to come. Once built this 3-tier measures exactly 24.0 cm Deep x 59.9 cm Wide x 80.1 cm High (so very close to but not quite as described at 24.6D x 57.7W x 80H).

Easy assembly instructions & looks good & stable.

As others have stated the boards are thinner than other makes so care must be taken when screwing together also the shelves are only black on 1 side, not like the 3d image, once built look okay for the price

Easy to assemble. Good sized shelves makes it practical and versatile. Finally got those piles of books off the floor

The reason for 3 stars is because one of the shelves only fit one way and it was the chipboard way up . Just as well was painting it .

Great little bookshelf, just what I needed and my son put together in about 30 minutes. He used the handy little tool for the tacks and it went together no problem It’s sits perfectly on top of my little cupboard

This was really easy to put together, took me around 30/40 minutes on my own and I’m not much of a DIYer. Really looks great and is sturdy. I use it for my books and with my PS5 on top.

Very, very disappointed. Flimsy, poorly finished. The shelves were only partly covered in white melamine. Therefore, it can only be used one way- As this was to be displayed quite high on a wall, the only way was to install it upside down so you couldn’t see the bare chipboard from below. Obviously this means a rough finish for the books to stand on. No possibility of adjusting the shelves , so many of my books don’t fit. The material used was so thin that the backing pins were very difficult to put in- they just kept splitting the thin chipboard. If I hadn’t already started assembling I would have sent it back - it may just be dumped in my garage now. Definitely not worth the money. See pics for my attempt to display the books. Not even white plastic screw covers were provided. Very poor value.

ممتاز جدا مقاسه وشكلة وتقفيل كان في خبطه صغيرة في الجنب بس اجمالا ممتاز

The best!

I can finally update this one. I’m increasing review to 5 stars with details to follow. They have very polite customer service members. They are slow. And apologized each time for the delay. I can’t put that all on them because honestly I just expected them to ignore the request and never respond. So pleasantly surprised. They actually responded to my follow up email. It was confusing and I thought they were sending me a label to return it. And then the next time I emailed back because they forgot or it slipped out before they sealed the package the little tiny dowels. So I had to wait another week for it. Both times the packing was superb. Guys. It blew my mind. They took care of it like they were sending it to grandma. This time I waited to get a 2nd pair of hands to help hold it steady for assembly. It’s solid. It’s sturdy. And I’m very pleased with the end result. Between the excellent service and the care taken in mailing the replacement items without making me even pay s&h? Full stars. I forgot to add pics after assembly so just showing on its planned home (another shelf). The backing piece unfolds and held together with tape tape when unfolded. I added extra tape along with the middle to help for long term. And I colored over the small gap with black permanent marker to avoid the light coming through being obvious. That is something I’ve learned over previous years of diy. It's been just over 2 weeks since this was delivered. I started assembly the weekend it was delivered. As part of the instructions, you assemble the various items in a specific order. I've include a closeup of Step 1 & 2 where you have the middle part of this bookshelf (the "H"). The steps aren't complicated, but they could use more details. The line in the "H", requires 4 wooden dowels to be connected, and those in turn to be connected to the end pieces. I cannot stress how delicate they are until its all stable. Well, at least I assume it will be stable. I'm still waiting on the replacement parts. While connecting the 2 outer edges to the dowels, the wobble factor was under anticipated. I'm embarrassed to admit that the dowels broke instantly when the 2nd one was attached, and I'd let go of the other side. Picture the attempt - trying to save one side, and the other side also becomes precariously balanced, and end up both becoming unstable. I was able to remove 2 of the broken dowels, and I might have been able to salvage the part "G", but the other side, the 2 holes are completely filled. I don't have a drill, and even if I did, I'd need the 4 replacement dowels. I'd have paid extra to have it delivered fully assembled -- why isn't that even an option? Anyhow - if you end up like me just needing something on the smaller side to help corral some desktop clutter, the feel of the parts is well cheap, but I'd think they'd be stable enough for the weight specified. The all black will hide a variety of sins. I even bought screw covers after reading in the reviews that would have been a nice touch to make it look nicer. The cons: --Pet peeve, always the directions are really light on details. And why do you have so many items to do in each step, instead of separate steps? --Well, Amazon directed me to the website product support of the manufacturer. It wasn't too difficult to fill out the lengthy questionnaire. Just be prepared, I recommend if you're on your phone, switch over to pc or laptop. --Timeframe for responses - took a week for them to respond, asking for more photos. I responded today, so guessing it will be another week for them to respond, either with another question, or a request to pay for the shipping & addtl parts. --Length of time waiting - I'm this close to throwing it all out. Waiting so long for this to be resolved is annoying. Do I salvage my time, and wait, or do I throw it out now, and buy something else for the more instant gratification? $40.00 isn't a deal breaker, but still, in this economy? You don't want to just throw it away no matter the irritation. The Pros: --The price is fine. I'd have paid more for it fully assembled. Why isn't this an option? that ANYone offers? --Items are lightweight, and as described. The material is pressed wood, so it does 'feel' cheaper when you look at it. --While I did complain about the instructions, these are better than many I've seen, in that the size of the photos could be easily viewed. --Each of the items were clearly labeled - this is something that is often missed, so kudos to the manufacturer - very neat and organized. Summary Well, this is one of those that I have to wait & update. If there isn't too much more of a delay, and the parts are replaced with only cheap fees, then I'll likely be happy and upgrade the review. For now, I'm on the fence with rating. Part of this is on me (I didn't fully understand the directions, and when it started to fall apart, overreacted when fumbling to save it, and items broke). Why can 't I go with half stars?

カウンター下に置きたくて購入しました。天板とカウンターの隙間に卓上カレンダー等が置けてちょうどいい。

tout était parfait