MOUNTUP Dual Monitor Stand for Desk, Monitor Arms for 2 Monitors 32 27 24 22 Inches, Height Adjustable Double Monitor Mount, VESA Mount with C-Clamp & Grommet Base, Holds 4.4-17.6lbs

Freaking love it. This stand was easy to put together, it looks really nice and feels very sturdy. You can move your monitors in all of the directions and get them situated perfectly.

Sturdy and holds the monitor really good. Easy to set up and move. I have a 32 inch curved monitor and a 27 inch monitor which I decided to have it portrait. Without the monitors I'd say its really light weight. The arms extends really far you just cant double stack it on top of one another. the black finish matches really well with my black table.

I've been using the MOUNTUP Dual Monitor Stand with one monitor (still waiting on my second one to arrive), and overall I'm satisfied with it for the price. It fit well on my desk and feels stable during normal use with no major wobbling or sagging once adjusted properly.Installation was straightforward, and the arms offer decent flexibility for positioning both monitors. The height and angle adjustments make it easy to create a comfortable setup, and it definitely helps free up desk space compared to traditional monitor stands.That said, the build quality is a bit of a mixed bag. The stand uses a combination of metal and plastic parts, and some of the plastic components feel cheaper than I expected. It gets the job done, but it doesn't have the premium feel of higher end monitor arms. The cable management covers also seem somewhat fragile, so I'd recommend being careful when removing or reinstalling them.For the price, however, it's hard to complain too much. The metal structure provides adequate support, it holds my monitors securely, and it looks clean once installed. If you're looking for a budget-friendly dual monitor mount and don't expect top tier materials, this is a solid option that offers good value for money.Overall: sturdy enough for everyday use, easy to set up, and a worthwhile purchase if you're trying to improve your desk setup without spending a lot.

I love this monitor stand. It's easy to set up and I have my desk pushed back pretty far. It only needs like less than 5 inches clearance from the wall. The arms fold back and out nicely so it doesn't take up your entire desk area. The arms and mounting hardware keep it ever sturdy and stable. They don't bounce around or shake at all. You can position the monitor horizontal or vertical and to adjust the motions, the Allen key they give you lets you easily turn the pressor sensor to tighten or loosen so you can tilt or keep in place.

This mount is perfect for my setup. The arms can basically go flat/line up with the back of the table, which works great for shallow tables. They also extend for deeper tables too. It seems super sturdy and flexible at the same time. The instructions were pretty easy to follow and everything came together perfectly. The price is great and totally worth it.

These monitor arms are great. While the setup process takes a bit to get it exactly right, it's easy to mount monitors on and they look really nice once everything's set. They seem really sturdy and the tension setting is really easy to dial in to get that exact right balance between stability and movability. The white also looks really nice on a black-and-white setup.Two very minor complaints with these arms - they do not include any sort of mounting plate to spread out the pressure on your desk from two mounted monitors. I had to buy two separate aluminum plates for the top and bottom of the desk, since it would have definitely pushed into the particle board and caused a permanent indent if I had not. The bottom is especially an issue - the mounting clamp only has about a 1" diameter metal plate attached to a screw that would have punched a hole into the desk had I not bought reinforcement plates.My second complaint is with the cable management covers - it includes two separate cable covers for the upper arms, and the tabs that attach them to the arms are really weak. I clipped it on and took it off three times during the setup process, and each time one of the tabs snapped off to the point where I just had to throw the whole thing away and use a velcro tie. So if you plan to use the separate cable hiders, just make sure you have your cables 100% set before you clip them on, because they might break when you remove them.Besides those two minor complaints, these arms work very well and look great.

Update 05/24/2025After having this mount for a while, I'm starting to have more issues. My monitors are on the heavier side 10 lbs each and they mount on the bottom center, rather than the usual which is centered on the back of the monitor. About every week I notice that they start to tip down and if I re-adjust they just tip again. I cannot tighten the screw anymore but if I over tighten it I can make it last again for another week before repeating. It's only going to last so long before the threads on the bolt are shot.Original review:Overall a pretty good monitor mount, the components feel solid and the materials are good quality. The instructions were easy to follow and get it setup. I do notice that when I type on my desk the arms / monitors shake a little bit and I can't adjust the tension any more so they are a little loose. I mounted it using the grommet mount, so it might be more sturdy if you use the c clamp but my desk isn't setup in a way that I can. I got it while it was on sale for $20 off so no complaints, I don't think I would keep it if I had paid full price for it though.

This Duel Monitor Stand is very strong and can be adjusted well. I was able to fit in two 32" monitors with no problem. In addition, the monitors did experience some weight issues but all it needs is the tightening of the screws that come with instructions. From that, it literally only took under 1 minute to adjust the tightness of the arm.I bought this product due to the small desk space and three monitor set up that I will be getting (the third monitor should be coming soon). I would say it is perfect for people who are going to place their arm with the monitor on their desks and leave it alone for a while. Just like other arms in Amazon, moving them can definitely wear down the arm and it is very inadvisable to change position every day.I also like how the cables are able to be hidden inside the arm and this is certainly useful for a minimalistic setup.Overall, it does its job if you do not fiddle with the arm too much and aesthetically it looks great for its price. I really recommend it! I will keep everyone updated on how the arm is doing in the coming months.If people are wondering what is my monitor, here it is:LG 32GN63T-B 32'' Ultragear QHD 165Hz HDR10 MonitorHopefully, this helps you all!

価格安いのに、かなり頑丈。３２インチを横画面、２７インチを縦画面で使用しているが全く問題無し

This is the best.Just like how I wanted perfect with my setup.As long as you organise properly the setup looks super good.Installation was bit confusing but not hard.Feels durable and heavy.The size is perfect for my desk.I can pretty much adjust it to my needs however I like.Absolutely love it.

Perfect

Funciona bien, buena calidad, relación precio

Sturdy