OwnMy 80mm x 24mm Luggage Suitcase Replacement Wheels, Rubber Swivel Caster Wheels Bearings Repair Kits, A Set of 2

These replacement luggage wheels are at least as good, if not better, than those you are replacing. High quality rubber and heavy duty bearings make these quiet and smooth with no pulling to one side. Amazon ships the new wheels, new axles, parts, and 2 hex tools in a ziplock. Two sizes of axles and extra washers are included so you can install the wheels and not have any drift or wobble. The axle hex screws even have a dab of loctite. My twenty year old TravelPro had wheels with cracking rubber and the manufacturer no longer provided parts. I used a pair of calipers and a straight edge ruler to measure the old wheels. It is important that you get the measurements correct to within a few millimeters. For removal and replacement, I needed a hand-held drill to drill out the old axles, a philips screwdriver, pair of pliers, pair of 4 inch vise-grips, a sorting tray, some blue tape, about 2 1/2 hours, and plenty of patience. Your experience will vary and if you are not the "handy" type, or if your luggage is really cheap, this will not be your best solution. I spent approximately $15 and my spare time, saving the cost of new luggage.

These wheels were the perfect replacements for my 21yr old Jansport rolling backpack's wheels that basically just crumbled away. As a matter of fact, these provide for a smoother roll than the original ones. Size was the exact match and instructions/installation super easy and quick! Hoping to get another 21yrs out of this backpack! Baby's got new shoes!

Bought these for a well used older Victorinox roller bag from which the rubber ring around one wheel simply disintegrated. I contacted Victorinox for a replacement and was told they no longer carry the part. (Disappointing for premium priced company that prides itself on quality.) I was given the name of a luggage repair business 1500 miles away which, when I called was told they would not sell the wheels but I could pay for shipping the bag to them and they would repair it. (Likely cost as much as a new bag.)Amazon to the rescue! Although not designed as a direct replacement because the Victorinox bearing had a deeper design, I was able to use the wheels by putting a washer between the wheel and the bag. Works great, rolls smoothly and quietly. Thanks again Amazon and MyOwn.

It's impossible to provide for all instances of needs, but this one comes close. In my case, replacing the damaged wheel on my 2-wheel drag along suitcase purchased from AAA a while back was the challenge. I had to grind off the axle fasteners on my suitcase and purchase a "long enough" axle made up of a machine bolt with lock washers and a nut. I fabricated a shaft extension to provide a "shoulder" for the new wheel (to allow the new wheel free to spin on its bearings. I put everything together and the new wheel works as well as the old one. With a little imagination and creativity I made this item work for my needs. The quality of this product is excellent. It just was not flexible enough to fit my need without some additional engineering and a trip to my hardware store.

My daughter has a Jansport Driver 8 that she used for less than a year and on the first day of the new school year, the tread on the tires already started to peel off! Jansport has a limited lifetime warranty but you have to send the backpack back; she needed it for school so that wasn’t an option. Found this item recommended on a Reddit thread for people with the same issue and I highly recommend it! A quick 5 minute replacement using a Phillips screwdriver and she’s got a smoother rolling backpack. Great value, the size is perfect for the wheel well. There is no noise when she walks with her backpack! I used 3 washers (included) to prevent the wheel rubbing against the inside of the wheel well. No need to buy another backpack!

Ordered the wheels for our Jansport rolling backpack. It’s easy to replace and works really well afterwards. This option is way better than going through Jansport’s lengthy claim process.Make sure to reuse the screw of the Jansport’s backpack. The ones with this order is slightly shorter than Jansport’s.

Recently, in the airport (of course) the original 15-year-old wheels on my carry-on started delaminating, thus making that loud clack-uh-clack-uh-clack noise while rolling down the concourse. These replacements were a perfect fit, easy to install, and make my carry-on roll like brand new. Very happy with these.

The wheels themselves seem sturdy and durable and they were relatively easy to install…but that’s the end of it. The axel mechanism is faulty in that the nuts holding the wheels need to be so tight in order to keep the wheel from wobbling and the bolt from loosening, that the axel assembly actually gets hot to the touch from the friction. I found this out after my first trip to the airport after changing the old wheels for the new. I noticed that the wheels seemed to be wobbling. Luckily I brought the Allen wrench provided, but when I went to touch the outside of the axel, I literally had to jerk my hand away, the axel was so hot. Incredibly poor design. Would never recommend this product to anyone except to someone I didn’t like very much.

Fitted on my Osprey Sojourn 80. Despite OEM wheels being 90mm, they still worked well.

These worked perfect on my Rick Steves mini carry on luggage…I ended up replacing the wheels on both of our carry ons even though only one really needed it.

High quality product that was easily installed to repair wheels on rolling luggage.

Wasnt sure about that they would fit but they were easy to chnage, worked great, replaced an old wheel and suit case is like new again, thank you.

It fits amazingly!