Eastman Vacuum Breaker Repair Kit, 45417

Works for smaller diameter Fusan parts replacement

This was perfect for my repair and easy to install. Great value, durable, and fits great. Hand-tight and no leaks. My hose faucet was leaking due to a freeze and this part was just what I needed. I think there are different thread sizes out there, but this one was what I needed for a new home.

Purchased this for a FUSAN spigot, similar to one pictured in other reviews (which was helpful). It installed easy and the valve works great. The only problem was it leaked (spurted a stream of water) when the spigot was open and the hose nozzle was closed. Trying different levels of torque when tightening I could see the o-ring twisting and losing shape. Perhaps they should use a heavier gauge o-ring? In any event, I redid the connection using PTFE Thread seal tape (white teflon), available at most hardware stores. Normally this tape would not be needed for this type of compression fitting but It has lasted for a number of weeks so far with no problem.

I recieved the kit in a day early as side. Came in a good package and kit was not damaged. It took maybe 5 minutes to take one out and new one. Fit perfect and no leaks when turning on water. Easy to install and the money value is good. Better thane buying new out side faucet.

Excellent thank you

Replaced old device with the Eastman product in 5 minutes and totally stopped the leak

I have a 'matching' faucet that looks exactly like the others reported here, but the new valve leaks after installation... Like others I'm replacing a vacuum breaker whose plastic vent cover simply disintegrated from sun and weather exposure after 15+ years. The pop-up valve itself still worked correctly - no leaks, but I wanted to replace it with one that had a nice metal vent cap so I would not have to worry about it for another 15+ years. Unfortunately, the new design with the screw-on vent cap does not work with my spigot. Where the old top washer that seals the valve frame to the spigot had a 'flat' profile and a suitable 'thread free' section in which the washer sits, the new valve uses a true 'O' ring and there is no 'thread free' slot for the 'O' ring to expand into for a leak-free fit. The female thread portion of the spigot itself has a flat top profile. Perhaps if the old faucet had a slightly curved profile, the new 'O' ring style might have properly sealed. For now I'm going to see if I can find a suitable plastic medicine bottle cap to slip over the old style valve. Really the cap is only needed to protect the nylon frame and rubber washers from exposure to the UV sun rays from deterioration.

I bought this kit to repair the vacuum pieces on my outdoor frost free faucet. Turns out, the only piece that fit was the small "washer" that pops up in the center. The cap had different thread, the vacuum piece had different threads and were not usable. But the problem was the wornout pop up. So, I used my old cap, old vacuum piece and the new pop up and my leak was fixed. If you can find the pop up separately, you can save some money. But bottom line.....my faucet doesn't leak anymore.

I purchased the Eastman 45417 Vacuum Breaker Repair Kit, and it worked perfectly for my needs. The kit was easy to install, and it fixed the issue with my old vacuum breaker without any hassle. The parts are well-made, and the instructions were clear and straightforward. It saved me from having to replace the entire unit, making it a cost-effective solution. Overall, I’m very satisfied with this product and highly recommend it for anyone needing a quick and reliable repair.

I don't know the model number of my frost-proof sillcock. It was imported by Home Hardware Stores Limited according to the installation document. "Asse-1019A" and "NSF 61G" are stamped on the faucet but these are standard names. I found out this parts using the photo of silver colored metal cap as a lead. It fitted my faucet perfectly. A small inner packing is hardly installed properly so I fixed and embedded it in the small hole of the plastic cap using plumber's silicon grease and screwed the cap into the faucet. The sillcock works perfectly without leaks. Thank you CAKKAM STOR for supplying this kits.

Worked like a charm.

Just installed it to day, leaked at first removed it aligned the poppet again slowly pressure it and yeah it worked great.

Took the old one out, put this in and the leak is gone! Never had to deal with this before, very happy for how easy it was and didn't have to get a plumber in.