Traxxas 3678 Wheelie Bar Assembly for Traxxas 2WD Electric Vehicles

Installs easy and works great. Quite necessary for a two wheel drive RC truck!

So I have a Traxxas Rustler 4x4, and if you have one too, you've surely noticed that the stock wheelie bar is extremely flexible, making it difficult to have stable wheelies. On Traxxas's website, they had a Rustler write up that uses this wheelie bar and a few other components to mount this on the Rustler. This wheelie bar has a solid mount rather than the flexible stock one, and the wheelie bar height is adjustable by unclipping it on the "bar" its on and moving it up and down. Absolutely awesome for setting it low to prevent high wheelies or "launch flipping" and being much more in control of wheelies. One thing I had found is that in rougher terrain if the back end of the car comes down on the bar sometimes it will unclip from adjustment bar and lay on the ground behind the car, I solved this by getting a soft velcro cable wrap and using that to "lock" the bar in the position I want it in, works perfect with no issues and is well worth the money. Major upgrade to the stock wheelie bar!

Durable, fit was perfect and works great. No issues at all. Hardware works and instructions are easy to understand. Great add on for anyone who needs a wheelie bar. I fit this on a rustler 2wd with onyx brushless upgrade and had no issues at all

Welllllll how should I say this...... I bought this product on the 10th of January. I installed this part on my Rustler and took it out for a spin. The part were great it's a lot bigger than you think it is and I had it on my truck in less than 20 minutes. Later I went out for speed run got my car up to about 50 gave it full throttle and it's not the Willy bar causing my rear axle to break today January 15th. I am going to contact the seller to see if I can get a new one if not I will be buying a new one. So as you can see I am 50 50 on this part but it does make your car look really good and it does work I also bought the aftermarket blue wheels by Traxxas that goes on it with the rubber tires so I guess I got an extra set of those now imma just tell you buy at your own risk and make sure that you operate your car on a smooth surface.

Good product

An absolute must AFAIC! An OEM accessory designed to keep your expensive 2WD Traxxas stadium racer (Stampede, Rustler, etc.) from flipping under hard acceleration AND acts as a protective bumper (wheelie bar section is removable for use as a stand-alone bumper as well) for the expensive and fragile drive components (motor, gearbox, suspension, etc) located in the rear of the vehicle. Perfect fit and supplied with all needed hardware and detailed illustrated instructions. Made from the same HD nylon that the chassis is made of. Three-position adjustable wheelie height, with optional upgraded wheels/tires available in various colors. I installed this, along with the RPM wide bumper on my Nephew's Rustler that I got them for Christmas 2015, and it immediately began paying dividends. I immediately smacked the thing into several walls, at a decent clip in both directions, and it held up beautifully. It also allows for great extended power wheelies without fear of flip-over. Well-worth the small outlay for all the protection it provides! HIGHLY RECOMMENDED!

Works

I honestly don't understand the 5 star ratings of this product. We have 2 of these, one on mine and my sons Rustler VXL's. I just don't understand the design of this thing. One side pops off all of the time (yeah the side without the screw) this then turns your Traxxas truck into a tiller. You will be constantly stopping and picking grass and sticks out of the wheelie bar. Soon after we got them on I found myself using zip ties to keep the wheelie bar adjustment in place as it would constantly pop off. To me that is some serious design flaws. Finally yesterday the one long screw in the bottom tore threw the hole it goes into BECAUSE it has so much pressure on it from only having one screw..not one on both sides. This has been an issue since this thing came out and Traxxas doesn't seem to want to fix it or redesign it so if you want this one you will be stuck with these issues as well. I shouldn't have to modify anything made for my truck just to make it do what it is advertised to do. A big company like Traxxas can do better than this.

Exccellent product. Original traxxas part. happy with the purchase

Delivered quickly and got this with the RPM Wide Front Bumper. It was fairly easy to install. You have to remove two screws from the transmission area, which is kind of tight for one of the screws. Otherwise, to install it afterwards was quick. It'll be a good for wheelies and as an extended rear bumper.

Prodotto originale traxxas

Con un poco de bricolaje y un par de bridas, he conseguido instalarlo en un HSP Brontosaurus 94111. Aguanta muy bien y es muy sólido. Además permite varias posiciones según desee el usuario. Perfecto.

Parfait