
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Croatia.
๐ Cut like a pro, finish like a boss.
The DAMO V25 1-inch Full Bullnose Diamond Hand Profile Wheel is a premium coarse grit router bit engineered for shaping and smoothing granite, marble, concrete, and countertops. Featuring vacuum brazed diamond technology and a universal 5/8-11 thread, it delivers fast, precise bullnose edges with wet or dry application at optimal speeds of 3,500-4,000 RPM. Trusted by professionals for durability and clean cuts.
| ASIN | B083CPTNXJ |
| Best Sellers Rank | #254,457 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #424 in Edge Treatment & Grooving Router Bits |
| Brand | DAMO |
| Brand Name | DAMO |
| Customer Reviews | 4.6 out of 5 stars 156 Reviews |
| Cut Type | Round-Over Cut |
| Cutting Diameter | 1 Inches |
| Cutting Length | 1 Inches |
| Item Diameter | 25 Millimeters |
| Manufacturer | DAMO Diamond Tools LLC. |
| Material | Matal, Diamond |
| Material Type | Matal, Diamond |
| Model | BPV25P1 |
| Number of Flutes | 2 |
| Part Number | BPV25P1 |
| Size | 1 inch diameter x 1 inch length |
| Size Name | 1 inch diameter x 1 inch length |
| Unit Count | 1.0 Count |
S**O
Worked better than I had expected.
We purchased a new fridge to replace the old one that came with the house when it started to fail. We noticed that the other fridge was jammed in to the space and didnt have very good clearance, in fact the old fridge had creases on the sides. So after removing the old fridge and before installing the new fridge we decided to cut back the granite counters a bit but wanted to keep the same rounded look. This product cut through the granite far better, faster, and cleanly than we expected. Well worth the price.
C**D
quick
Loved how fast this cut into the granite edge. made short work of it. Took a lot of sanding after to get out the marks left behind. However I only intended to use it one time anyway. A pro would know that well in advance. Great tool
J**R
Works great
Small dispute with my pool builder over what gets bullnose and what does not. So I did it myself. Did about 120', took about 2 hours and the bit still has life. It makes a huge mess but that was expected. When I ground the travertine, it left the bullnose slightly white - pro tip- used WD-40 on it and made it look like factory edge.
A**C
Cuts great
Cuts travertine with ease
M**Y
Made my own Bullnose
I purchased this to make my own bullnose after my granite guy told me it would be $500 for him to do it. Worked great! you will also need a polishing kit to finish the edge.
V**L
Great tool to make your own Granite countertop bullnose edge
Bought this diamond profiler and used it to make my own bullnose edge on a granite counter top. It is somewhat pricey, but still better than paying a granite guy a few hundred bucks to do it. - First cut off a strip of granite about 1.5" wide - "glue" this strip to the underside of the countertop using granite epoxy, clamp it down and let it dry - Grind the edge into bullnose shape with the hand profile attached to a variable speed angle grinder - Finish of the end result with diamond polishing pads for a shiny finish The profiler tools even gives a nice rounded edge on the countertop corner, let it slide over the corner around the edge.
A**.
Super legit!
I was hoping that for the price I wouldn't be disappointed. This, combined with the Damo 4" polisher and pads, a small wet saw, another 7 in diamond bladed skil saw, some epoxy and clamps was just what I needed to make my own damn good looking bullnose edge on 3/4 granite. I've only done about 3 lineal feet of bullnose with this so far, but this thing shows no wear whatsoever. Keep the rpms pretty low. In the pic, the factory edge is the left edge. The edge I did with this is the right side.
J**Y
Heavy Duty
Pros: This is a relatively inexpensive alternative for anyone who wants to grind a bull-nose edge on a granite countertop. You can attach it to a heavy-duty drill. Cons: Still, it is somewhat expensive. Comment: It is a difficult process and I wouldn't recommend it unless you have an angle grinder or angle drill. Even then, it is a lot of work because you will need to make many, passes to grind down the granite edge. Also, unless you have a angle grinder specifically made for wet applications, you will want to use a garden hose to keep the work area wet which is very messy and a possible electronic shock hazard.
J**N
Fluted quartzite bit lasted the long haul
Used this bit to bull nose 84 quartzite strips and if you donโt know that is a test of performance. Worked great. Have used other similar bits and this one did not disappoint. Center feed water was a must and left the finish in a 80 grit that was exactly as I expected. The shipping to Canada was slow but out of there control so make sure you add a week or more to your expected shipping if it is needed on a deadline. Supplier was great to deal with and quick to respond to my questions. Itโs a great product.
Trustpilot
2 weeks ago
3 weeks ago