Description
- Battery Terminal: Adaptive charging current regulation, charging current up to 5A. OUT 2 port (orange USB) (With data transmission charging line, one of the following protocols can successfully communicate the handshake)
- Working Voltage: Support 4.20V, 4.35V, 4.40V, 4.50V battery (The first charge to 99% will be slower to 100%, because the identification battery can reach a safe voltage, please be patient; Basically imported 3800mAh cut-off voltage is 4.5V; 3600mAh is 4.4V; 3400mAh is 4.35V; 3200mAh is 4.3V; domestic batteries of 2800mAh and below generally have a cut-off voltage of 4.2V;)
- Discharge Specification: Support line compensation, synchronous switch discharge 5V/2A efficiency up to 95% Multiple protection, high reliability: Built-in input overvoltage and undervoltage protection; Integrated output overcurrent, overvoltage, short circuit protection; Self-contained battery overcharge, over discharge, overcurrent protection Built-in IC over temperature protection; Integrated charge and discharge battery temperature NTC protection.
- ESD 4KV, input (including CC pin) withstand voltage 25V Power: 18W (dual USB output + TYPE-C port / Android port dual input solution) OUT 1 port output: 5V/3A; OUT 2 port output (orange USB): 5V/3A, 9V/2A, 12V/1.5A (supports 5V side charging); IN input (micro Android port): 5V/3A, 9V/2A; Type-C port output: 5V/3A, 9V/2A, 12V/1.5A (supports PD protocol output); Type-C port input: 5V/3A, 9V/2A, 12V/1.5A.
- Other Functions: Long press to turn on the flashlight, double-click to close the output; install the reverse to not burn the motherboard. Battery requirements: flat head without protection board 18650 battery (65MM long), internal resistance 60 milliohms, discharge 2C or more; fast charging power, using the disassemble battery will affect the experience.
Integrated QC2.0/QC3.0 Qualcomm input/output fast charge protocol               Integrated FCP Huawei, AFC Samsung input/output fast charging protocolIntegrated MTK PE+ 1.1&2.0 Meizu, SGCP Spreadtrum Output Fast Charge ProtocolIntegrated USB C DRP protocol, support input / output fast chargeIntegrated USB Power Delivery (PD2.0/3.0) protocolSupport PD2.0/3.0 input/output protocolSupport USB C PD3.0 PPS output protocolPPS supports 5~11V, 20mV/step output voltage position                Integrated hardware bidirectional tag codec (BMC) protocol                Integrated Physical Layer Protocol (PHY)Integrated hardware CRCSupport Hard Reset This is a DIY Power Bank Case Kit, you need to assemble it by yourself, and the battery is not included !!! No Battery is included, Only Power Bank CaseProduct List: 1*8 section 18650 charging treasure shell
