Sanus Soundbar Mount For TV Mount Bracket - Height & Depth Adjust, Moves In-Sync With TV, Supports Sound Bars Up To 20 lbs - SASB1-B1

Easy to install. Order before you attach mount to TV to save steps. Seems sturdy snd did what was expected. Be aware the cord hiding requires more cord/cable than came out the box with TV and sound bar.

Easy to install and great quality.

The only one that worked for my situation out of the three I tried. I didn't want to see any wires between soundbar and tv. I also did not want to see brackets extending upward from under the soundbar to the front of it that two other brands had. My soundbar has rear keyholes for wall mounting. This item included option to use them Thus you can't see any wire or any mounting hardware. And the mounts are easily adjustable to rise or lower soundbar or to adjust how far forward or back you want it to be relative to the front of your tv. It was worth the $25 higher price.

This mount is quite expensive for the build quality, which is mediocre. It did not support the weight of our soundbar - a Klipsch Flexus Core 300 - and required a visit to the hardware store to purchase extra, unsightly clamps to secure its support bars, since they otherwise continuously slid down from the weight. The built in system to secure the bars in place is plastic plus springs and does nothing. Pretty ridiculous given the price. Try harder guys, this thing is crapola.

Not easy. Had to remove TV from wall mount. Since construction did install we had to figure out how to drop TV from mount without breakage. Then had to remove mount from TV and test screw lengths for proper fit. Glad many extra screws were provided. Also redid mount due to soundbar size. Leveling was easy due to friction setting. My size TV the sound bar stuck down about 4 inches lower than I wanted. Still good product, fit easy would purchase again.

Good design and fairly simple installation (~1 hr). After installation, the Samsung Q990c sound bar (17 lb) slowly sank to the ground under its own weight. Spent another hour fiddling with the locking mechanism to try to keep it in place. In the end, I fabricated my own locking mechanism from scrap wood and U bolts to hold the rods in place vertically. Everything is working now but wouldn't buy this product again. Manufacturer could improve product by fabricating a metal locking piece with a set screw to slide over the rod and lock everything in place for sound bars closer to 20 lbs. Total time spent was ~3 hours installing and fabricating supports.

Mounted a Sony sound bar below 65” LG OLED TV (TV wall mount is Sanus BLT3). Easy to follow instructions are very comprehensive. Final adjustment tweaks to position sound bar was simple. Sound bar had 2 keyhole mounting slots on its backside, so I used the supplied knob type keyhole fasteners. 2 thumbs up!!

LG 65" , JBL 1000 soundbar, and a Sanus full motion TV Mount from Costco. Easy to install.

It claims to hold a 20 lbs soundbar, but it cannot hold the weight of a Sony HT-A7000 which is less than 20 lbs. The mounting arms are flimsy, held to the mount only at a single point, and so bend under weight. Only suitable for small soundbars.

Wyglada nieźle ale pod cieżkim soundbarem ciutke się ugina na blaszkach. Jednak w porównaniu do innych rozwiązań jest bardzo silny i stabilny dla cięzkich belek.

It has been quite an effort for me to find the right soundbar mount. As the title states, after trying two other highly rated mounts, I found this one from Sanus to be the best. It not only fit my application the best, but it also has a superior design and construction to the other two most commonly found mounts, in my opinion (this: https://www.amazon.co.uk/gp/product/B01DKOR2TE/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 and this: https://www.amazon.co.uk/gp/product/B077Z7SPTM/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1). I will caveat that last statement by saying that if you have a TV that is mounted VERY flush to the wall with a "no gap" mount, such as The Frame from Samsung, then this Sanus soundbar mount is not for you, as it will create a gap of roughly 16mm between the back of your TV and your TV mount. This is because the Sanus mount gets attached directly to the back of the TV, then the standard TV wall mount bracket goes on top of it. If you have a flush mount TV to the wall, then I would recommend you look at the other two soundbar options in my links above, as they will only increase your TV-to-wall mount gap by 2mm at most . . . or potentially not at all if you can fix them to some unused VESA mounts on your TV. This is the ONLY REASON I would recommend any other soundbar mount, though. Note that the mount in the first link WILL NOT work on a 75" TV, as they're too small, and the mount in the second link WILL work on a 75" TV, but the sound bar is a bit "floppy" and the arms stick out a lot from beyond the soundbar and doesn't look very good. My 75" Samsung Q95T TV is on a Tranquil Mount, which allows it to pull down from above the fireplace, so there is a lot of space behind it. I also have a large soundbar (Samsung Q900T) and I wanted it to be recessed behind my TV so that the front of the soundbar was as flush with the front of the TV as possible. This Sanus mount is the only one I've found that can properly accept the depth of my soundbar without making it stick out WAY beyond the screen. In the photos, I have the mount set for maximum depth, but my Q900T still sticks out a bit. The depth of my soundbar is 138mm, and it overhangs by 28mm, so if you have a soundbar that is 110mm or smaller, then you'd be able to get it completely flush with the front of your TV screen . . . if that's important to you. Just remember that you'll need to have that kind of space between your wall and TV, though, if you plan to mount the soundbar towards the back. The build quality of this mount is very good. My soundbar seems to be much more securely mounted with the Sanus than with the other two mounts I tried. Height adjustment is dead simple and infinitely adjustable to literally any height. This is something that was VERY finicky on the other two mounts I tried and was highly aggravating for me. Installation is fairly straightforward, but you will have to fully remove your wall mount from the back of your TV, which is something you didn't necessarily have to do with the other two mounts I tried. A plethora of hardware is supplied, but my only complaint is that I wish the VESA mounting bolts would have been supplied in length increments of 5mm instead of 10mm. I ended up having to use a few washers on the M8 x 40mm bolts, as the 30mm ones were too short. 35mm would have been perfect. In closing, as long as you have a gap of 20mm or so between your TV and wall right now, then this is 100% the soundbar mount you should buy. It's design and build quality is far better than others on the market, and it works very well with larger TV sizes (75"+). Although other mounts say they can fit a 75" TV, I did not find this to be true, especially with the curved, fixed arm version. The big bonus with this Sanus mount is that the depth is adjustable. Because of my large soundbar, this was a must for me. After trying the other mounts on the market that are not depth adjustable, the back of my soundbar was flush with the back of my TV, and this meant that because of it's size, it looked absolutely ridiculous. That being said, even if you don't need the depth adjustability, I would still opt for this Sanus over all other mounts on the market.

works perfectly with Sanus VLT7-B2

great for my setup ,required modification to met my needs. I'm exspens in fabrication and instalation. Chose this bracket design for the adjustability and least flimsy to other brackets.