Flux Core Gasless MIG Wire, E71T-GS Mild Carbon Steel .035-Inch Diameter 10-Pound, Strong ABS Plastic Spool Welding Wire

I used this in my Harbor Freight 120V mig welder. I typically weld my mower deck, trailer side rails, and mild steel1/4". This works better than HFT brand mig welding wire. Package is thick durable and air tight. Treat your self, buy this affordable quality wire. Don't let me catch you welding in shorts and sneakers. Don't weld indoors. Protect your health. With all the money you are saving by doing it DIY, you can now get the proper PPE right here on Amazon. Happy Welding.

New spool for a new flux core welder. It feeds smoothly, without binding or unspooling, and burns well. I'm still tweaking the welder, but at this point it seems to have a good melting point and welds with decent spatter control and no tip burn or fouling. As we know, the versatility of flux core makes it preferable to stick or gas-shielded welding for some positions, and outdoors where wind can affect the gas. Right out of the box it seems a bit brittle, but I've found 0.030 flux core to often be that way. By the time it's loaded and run through the cable it's fine - just handle it gently until then. This wire comes vacuum-packaged in a foil wrapper to protect it from rust and contamination. Better packaging than some competitors, which can arrive with light surface rust or oxidation that can affect the quality of welds. And the price is right - about half the price you'll see at the big home improvement stores. Based on the many positive reviews, this might just be the preferred wire for beginners and for experienced welder alike. One thing I wonder about is the thickness of the spool itself. On my new welder it seemed to have a little extra thickness, enough that the spool, tension spring, spacer, and washers left too little room for the tightener wingnut to engage the spindle's threads. Might be an isolated problem, but if so you'll need to find a workaround.

I was not sure if this was going to be a wise purchase since I had never used anything but Amercan name brand flux core wire in my Lincoln welder. What an amazing suprise the first time I used this YESWELDER flux core wire, it works great! It came well packaged, you could not ask for better protection for shipping or long term storage. This flux core wire welds amazing well, even over not so clean metal and leaves a strong durable weld. This flux core wire flows really well, very low splatter, and makes it easy to set heat levels. The spool fit my machine better than than the OEM spools.

welds as good as any wire I have had in the past. Great price and packaging !! I will buy the 10lb spool next time to save even more money !!

I am a newbie to welding, but man is this stuff good! Ive tried a few others and they just do not stand up to this! Especially price-wise, this is simply amazing! Who would have thought that a brand named "yeswelder" would make such high quality wire!

some of the best wire ive used with my harbor freight mig welder, low splatter. worked really good at higher amperages, the higher the amperage went the less it would splatter,

Noticably less spatter than the usual name brands . Don't know about tensile strength but liking the welding performance.

This almost what the orange store charges.

وصلت وقمت بتجربتها مباشرة، ممتازة جداًً وسريعة في التلحيم، وقمت بتجربة في السابق لشركة Lincoln و Blue Demon ولم اجد فرق بينهم في العمل . هذه افضل بكثير من حيث نفس العمل والسعر والكمية . انصح بها

Muy buen producto. Excelente adhesión al metal _acero al carbono_ Alto rendimiento, bajo en proyecciones. De fácil uso y eficaz. Bajo en vapores al momento de soldar. Lo recomiendo. Tiempo llegó en tiempo y forma. Gracias.

Good wire for me being DIYer

Excelente material para el trabajo que realizo, si complace mis expectativas de lo que esperaba del microalambre

My new report: the better miller machine does VERY well now with the flux core wire AFTER I realized that my welders polarity was reversed!!! I was ready to give up on the Miller and go back to my cheaper Lincoln. I’m glad I found out about the possibility of it being a polarity issue and I swapped the ground and gun wiring. Because of the current quality of weld, the packaging, clean wire, smooth quiet feed, and reasonable price, I’m changing to 5 star. ——————— old review below—————- welds nicely but wow, what a LOT OF SPLATTER!! I tried multiple settings, and it's NOT just because the wire feed was too fast. I ran this with my new Miller 141 and lincoln flux core wire through my Lincoln 140 welder on the same metal and the difference was NIGHT AND DAY! Virtually NO splatter with the Lincoln wire and TONS of large splatter with the Yeswelder wire! This splatter could NOT just be wired off either, must be ground.