FH Group Car Seat Cover Cushion - Rear Seat Covers for Cars Trucks SUV, Faux Leather Car Seat Cushions, Waterproof Car Seat Cover Cushion, Universal Fit Car Seat protector Rear Set Black

Just installed FH Group seat "mats". I generally do research, or watch vids from other costumers to find a way for installation. I saw the vids on FH Group website; I saw nothing on installation for 2015 Dodge Challenger. Pro: Nice looking product, well made. Con: comes with no instructions. You may not think you need instruction with this, but wait until you get to the hooks that attach to lower part of mat. The "slitted plastic discs" are another obstacle. This is a one piece mat as shown. On the 2015 Challenger, the head bolster is a tight fit. When sliding cover over stock headrest, take your time and work it top to bottom slowly. Mine did't rip, but I thought it might. Pull center of mat to where car seat and back fold> TIP: install slitted plastic discs before beginning installation. Make sure to install elastic straps on mats into opposing slits in disc. The straps won't fit all the through where seat folds forward on the 2015 Challenger. You will have to push disc through fold area of seat and turn disc up slightly for it to hold on place. To secure bottom of mat, first pull open center of metal clip so you can install elastic band attached to base of mat.(I did anyway) Make sure clips are facing downward. HERE IS THE HARD PART. I have power seats...you will have to find something to attach clips, to. RECOMMENDATION: look under seat to locate all wires, sensors, and motors used to operate power to seat. DO NOT ATTACH CLIP TO THESE. Look under seat and operate seat adjustment controls to identify moving parts...DO NOT ATTACH CLIPS TO THIS!!!. There is a black mounting bar under seat with a silver motor attached. Hook clips under bar and over. When you hook clips to bar, the hook end will be facing up for easy installation.WATCH THAT YOU DON"T CATCH A WIRE UNDER SEAT. If you hooked clip facing up on initial installation, just twist elastic strap. This should't take 30 minutes to install both mats. I just had to figure it out.If these instructions sound confusing, try to put covers on a 2015 Challenger without them...I am sure it can be done.I give a 5 on product, a 3 on installation, and a 4 on fit to 2015 Challenger. Hope this helped. UPDATE: The fit is much better the more you sit on mats. I also noticed on my 2015 Challenger, the back seats have a headrest and contours similar the front seats. I am 95% sure these will work on the backseat because they are mats. From looking at it, I believe bolster on mats will fit much easier over the back headrest than on the fronts. I am going to order another set for the backseats of my Challenger. If you can get the fronts to work, the back looks to be E-Z. Nothing follows/// Revised: Second set of covers arrived and have already installed. Second time around is easier. I installed these on the backseat of my 2015 Challenger, Seat fit perfect. Had to work with headrest a bit. Back headrest is slightly smaller than the front, but it worked, I change my review to 5 stars. Thank you FH Group.

I have a 2005 Mini Cooper and the front seats were looking rough. Leather was getting worn out and the red fabric on the seats was stained no matter how many times I cleaned them. So I looked on Amazon for seat covers and found a whole set (front & back seats) for less than $30. Read the reviews and most were unhappy with them so looked into seat cushions and found these. $57, almost double the price but had better reviews so I bought them. No instructions but it's easy to figure out. Pull the straps thru the base of your seat and connect them with a plastic thingy that comes with. Take metal hooks and attach to the straps at the bottom and hook to the bar under your seat. Be careful not to bend the hooks too much when feeding the strap into it....they break really easy! Pull the top over the headrest and click the strap and your done. Quality is nice and it actually is thick enough to give you some cushion. Very comfortable and they have gripping material on the back so the cushions don't slide around. The material is breathable so it actually helps keep the seats cooler in the summer. All around two thumbs up for appearance, durability and quality. Pay more money for these....it's worth it!!!

Best things about these covers are the material quality and the sharp look. As with any universal car product you can't expect a perfect fit. In my Mazda CX-3 the covers are shallow towards the bottom of the back rest and spill over the side near the top. Not a deal-breaker by any means, but with a manilla-colored underside it's a tad ugly from the back. Installation was easy enough, I suppose. Searched around for an install video and found a similar product that gave me the right idea. I'd say the securing strap system isn't incredible. Cover is a bit loose in sections and restricts the headrest if you want the cover to lay flat and look good. Bottom line: for $43 it's a steal and I got more than I expected.

After buying a new car with cloth seats, I wanted to firstly protect the seats, but also do it in a way that looked good. I tried a cloth cover but it looked really ugly because of stretching awkwardly over the shape of the seat, and catching lint and dust. I knew that the only solution was leatherette that was made to conform to the shape. I looked at custom options and would have gone that way if there was no other option. The drawback was that it would cost over $500. Worth it to protect cloth seats? Depends on who you ask, but certainly for me, as I like to keep my cars for a long time. At the same time I like to be really frugal and calculated with my money. I found this option for under $60 for a pair. I did have to swap out a set because of awkward stitching on one (line was not straight causing an odd looking bend), but otherwise the cover fit great. While I would have also liked full coverage on the sides there were definitely some pros to this design. Its very easy to lay over and adjust. Plastic tabs that come with the set allow you to loop the middle through the middle of the car seat, letting it sit without sliding off. I was also concerned about feeling overheated or sweaty due to the leatherette, however, the perforations and foam inner made this a non-issue most of the time. I was also concerned about the leatherette feeling very cold in cold weather. However, it warms up quickly. I am very pleased with this product and have also purchased a pair for my dad's car after he was also impressed with the set. The only better option for me would be a full custom made set, so there is really nothing better for the price.

The cover material is of good quality but the straps to hold the covers down is very weak. I broke about half of them trying to get a good fit on the bench seat of my XT6

I cant find a best thing to say about these. They are comfortable, the protection of the seats are excellent, they are stylish, and reasonably priced. They did fit my van bucket seats without the removable headrests. Probably not recommended they are a little snug on the headrest, but they do fit. There was nothing to secure the straps to under my seat that was close enough for the straps to reach. I bought some small bungee cords at Walmart in the automotive dept. I took a strap from opposite corners and made an X under my seat to secure the straps. This helps hold the front in place as well as the back in the crevice of the seat.

I debated buying this for a while for my 07 Acura TL and I am not upset about the final product. It looks great for seat covers but it does raise you up a little in the seat. The fit isn't going to be perfect but compared to my ripped up seat I'm very happy with it. Still not sure how the seat heater for my car will work with it but it does well in the sun even though it is black. Installation instructions are literally on the Amazon page and it was really straight forward. Hardest part was finding a place under the seat to clip the front hooks onto that wasn't affected by how you moved the seat. I feel like it could be cheaper than it is more around the $60 range but all in all worth the money spent. I will update if something bad happens or if I magically fall in love with it for some reason.

These my 2016 Kia Soul with some imperfections I can live with. I will admit the front pocket is a bit useless and the clips provided did not help much. I needed to buy some "S" hooks to get the elastic straps taught enough but not so much to tear the straps from the covers themselves. You can judge for yourself from the pictures provided on how they look. Over time they should mold to my seat and body form much better then when first installed. Will have to see. Overall, for the amount of money spent I think the quality is good and comfortable. I did not feel them sliding under me so that is a good sign. . Durability is a question only time will tell. I am not an abusive person nor do I keep any objects in my pants back pockets so your mileage might vary.

Absolutely love these seat covers. Great quality, easy to install, and they do what they're supposed to do… protect the seats in our new 2019 CRV. Watching a quick video online made the installation fast and simple! Also love the bit of blue, and that they don't block airbag deployment. Would have preferred if they'd had an option for a very thin line of blue, but these are great, and it's nice to have some color. You won't be disappointed... and such a great price.

Arrived early! Easy install, superb fit and very sharp look. Comfortable and cool! Well constructed.

Muy buena relación calidad precio y buen ajuste, se ven bastante bien en interiores y cubren perfectamente protegiendo vehículo nuevo. Fáciles de colocar, ajustar y también de limpiar. Son impermeables y resistentes a derrames. Lo único criticable es el color "crema" de la tela del forro interior, mejoraria si fuese en negro.

Ajustan a la perfeccion, son faciles de limpiar y se ven genial.

Fácil de instalar buen material y cómodo