Eryone Ultra Silk Filament PLA1.75mm,3D Printing PLA Filament +/-0.03mm for 3D Printer and 3D Pen, 1kg (2.2lbs)/Roll Copper

Amazing looking filament. Prints smoothly without an issue and barely any visible layer lines at thin layers. Love the colour gradient. This model produced a bit of stringing but that's to be expected. Quick blast from a heat gun and it came out perfect. Such good filament for the money would definitely buy again

I have used Eryone a few times before and it has always given me a good reliable standard of print and I think there silk rainbow filament is no different. I printed this filament at 195 degrees without any issues. If there are any issues with the prints its normally my user error which can be removed with a little fine tuning of retraction etc which is normal when you change filaments as they use different additives. The things I look for in good filament when I get it is a consistency of the thickness of the filament which in this case should be 1.75mm. You can see this filament is within the tolerances they claim and I measured multiple places along the filament and it remained pretty consistent. (I have added a picture to support that) The 2nd thing I look for is how the filament lays down on that critical first layer. The rainbow filament is beautiful when it lays down on the bed (I printed at a bed temp of 50 degrees) but don't take my word for it check out the added picture. In general you can see from the images the smooth shiny surface you would expect from a silk filament and I have added some pictures so you can see the colour change and what you can expect when you print this filament. If I had any negatives it would be that I felt I was missing the blues from the picture showed however this is a very minor issue and may have been just my one roll. One further thing I would mention with Eryone is there great customer service. I have had a bad roll from so many companies usually due to moisture and it can happen to any company you buy from. What I would expect from a good filament company is that the company replaces that roll if its very bad without fuss (although I will normally try a dryer first) Eryone have always had for me one of the best responsive and easiest customer service to deal with. This is an easy choice to buy this filament and if its on one of there deals snap it up and have fun printing it.

Lovely colour tones! It's worth noting that the colour doesn't seem to change with view angle and seems a little random but overall I love it. Very smooth silk finish!

Pretty good fillament! The print quality at first was ehhh not good at all but its way better now works like a charm! Adhesion is also pretty good but i recommend using glue just incase! It does snap easily but thats fine And one late things is that the colour changes really slowly still a really great fillament hreat for the money a little bummed out that the shipping was £5

I needed a multi-coloured PLA - and this one looked good and when printed the material looks good - but I would not buy this again - it is trouble - it is very very delicate with getting the settings correct for it - but impossible to do any large-ish print with it - it is either kinked on the roll or automatically kinks coming off the roll and then it jams in the extruder - no matter what machine I use or anything - I had to hand-feed it into the extruder and yes it appeared to come off the roll with kinks which will jam the extruder - I had to cut out and join to remove the kinks. I changed to a different manufacturer - problem completely gone …. Sorry…. Maybe I got a bad roll ?

Purchased reluctantly after having issues with other brands silk PLA and i must say i was pleasantly surprised. This printed like a dream and although slightly more brittle (as expected) than normal PLA it was still quite tough, also compared to other brands i have used this produced very little stringing. I am V impressed and will be purchasing other colours in this brand. The colour was perfect too (i used it for an Iron man helmet).

The product purchased is Copper SILK PLA Filament 1.75 mm SHIPPING, PACKAGING AND PACKAGING: The product arrived within 18 hours of ordering, the Eryone branded filament box was contained inside a classic Amazon cardboard box. The filament is a silk PLA in copper colour, the product looks to be of a good quality. The flexibility of the filament is very good and has been perfectly preserved in its hermetic packaging with moisture absorbent. The filament, measured at several points, always measured 1.75mm. This PLA silk is characterized by a very glossy and smooth print compared to standard PLA filaments. IN USE: The quality of the filament is excellent, a really high grade, this makes printing quality shiny prints a joy. Loading the filament was easy with extrusion being very accurate and consistent. The machine I used for the printing is the Eryone ER20. First I printed a temperature calibration tower (with fan on the nozzle). According to the test I set the print temperature to 195. I then printed the classic Benchy without any problems and went on to print the Julia Vase #011 - Heatwave with a great finish. The material is perfect for this type of print! The results, as shown in the photos, are excellent and the quality of the filament is very high, the smoothness and polished effect makes the printing look very professional, with very little post production you can get beautiful results. CONCLUSIONS: The quality of the filament is very high, the silk PLA gives a fantastic finished print requiring little or no post processing, the colour and sheen is stunning. If your looking for a quality silk PLA 1.75mm then I recommend the Eryone product.

I was looking for some PLA filament that was slightly different and came across this Eryone Ultra Silk. I have seen Eryone filament used before and heard good things about it, and some other reviews mentioned how good the colours are, so I decided to purchase. I was not disappointed. As soon as I opened the box the colour was amazing. The filament was wound lovely on the spool as well, and was vacuum sealed with the desiccant sachet inside. I opened up the sealed bag and then you could truly see the colour and how amazing it looked. I loaded it straight into my MK2S and sliced the boat benchy. I always use this for new filament to see if I need to make any additional little tweaks. I left all my settings the same HE210 HB55, and started the print off. During the entire print 1hr35min there was no issues with this filament extruding, popping or even little strings appearing. It printed not far from flawlessly. I took the print to show the wife, 1st thing she said "That is an Amazing Colour". The photos do not do it justice, but you can see the shine in the second photo pardon the hand. So would I recommend this filament. Yes I would. Why? Colour, Packaging, No Issues experienced. I will definitely look at adding the other Ultra Silk Colours to my Filament collection. Also if this filament is anything to go by, then I will try additional Eryone Filaments as well.

Perfect! Makes a smooth, shiny print. We love it!

Ho acquistato più rotoli stampandoci diversi oggetti d'arredo come le placchette per gli interruttori di casa, vasi ed anche dei portachiavi. Tutti senza problemi tenendo sempre a mente che i colori Silk hanno una minore aderenza tra i layer. Tra tutti i colori che ho stampato il Dark Gold è il mio preferito^^

Bra silversilk filament, lättprintat, behöver inte kompenseras

Ich habe schon einige Rainbow-Filamente ausprobiert, aber dieses hier von ERYONE sticht wirklich heraus – der Glanz ist beeindruckend und der Farbverlauf kommt extrem lebendig rüber. Die Farben wechseln schnell genug, sodass man selbst bei kleineren Modellen deutlich mehrere Töne sieht, was bei vielen anderen Filamenten nicht der Fall ist. Der Druck lief absolut problemlos. Die Maßhaltigkeit liegt sehr stabil bei ±0,03 mm und ich hatte keinerlei Probleme mit Verstopfungen oder schlechter Layerhaftung. Das Filament ließ sich direkt ohne große Anpassungen auf meinem Standard-PLA-Profil drucken. Auch die Oberflächenqualität ist top – die Teile sehen fast aus wie poliert. Was mir besonders gefällt, ist der „Ultra Shiny“-Effekt. Das Filament hat diesen seidigen Glanz, der vor allem bei dekorativen Objekten richtig was hermacht. Ich habe eine Vase und einige Schriftzüge gedruckt, die sehen aus, als wären sie aus lackiertem Kunststoff. Natürlich ist der schnelle Farbverlauf Geschmackssache – wer sehr gezielt bestimmte Farbbereiche einsetzen will, muss etwas experimentieren. Aber für kreative, auffällige Modelle oder Geschenke ist dieses Filament ideal. Ich bin absolut zufrieden und werde es definitiv wieder bestellen.

Ottimo filamento