RF803G Retrofit Gray EPDM Pipe Flashing Boot/Jack 3-1/4"-10" OD
Product ID: 192045832
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Croatia.
#803 Gray Dektite Retrofit EPDM Flexible Pipe Flashing (RF803G)-Continuous Service Temperature Ranges of -58F to 239 F (EPDM)-Flashing Base Diameter is 14-1/2" - Pipe Boot Fits 3-1/4" to 10" Outside Pipe Diameter-Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors-EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing Easily-Fasten Aluminum Collar To Metal Roof With Metal Roofing Screws Every 1-1/2"-Where the Height of Pipe is Difficult to Reach or Existing Obstruction Blocks Top of Pipe;-Flashing Can Be Cut Along the Seam and Resealed With Provided Clips-If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack-Reduces Building Maintenance Due To The Long Life of the Dektite Product-Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents-20 Year Manufacturer's Warranty Against Manufacturing Defects Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees)On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter PipeCaution: This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated. Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May OccurFor single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications Review: Very pleased - I bought two of these to seal my two chimneys after installing a new metal roof. The base is very easy to form to the ribs of the metal roof, and it has starter indentations for the screws. The graduations in the rubber are easy to see, and it cuts easily. I did use a caulk to seal the underside where it impacts the roof, but I am not sure it was necessary. The rubber fits very snuggly around the pipe. I have no issue with leaks. Great product, Review: Used for sauna chimney - I made the mistake last time of getting the wrong type of silicone that wasn’t heat resistant and it ended up 🔥 . I also only uses a single wall chimney, which obviously did not work. But this go around I splurged and I haven’t had any issues. Really simple to use. Super satisfying to cut the ring. Just make sure you don’t cut too deep, right? You can always cut more, but you want that snug fit.
| ASIN | B07ZZH871B |
| Best Sellers Rank | #218,021 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #131 in Roof Flashings |
| Brand | Dektite |
| Brand Name | Dektite |
| Color | Gray |
| Compatible Material | Metal |
| Customer Reviews | 4.7 out of 5 stars 633 Reviews |
| Item Dimensions | 14.5 x 14.5 x 6 inches |
| Item Form | Liquid |
| Item Highlight | Retrofit boot installs around existing pipes; cut & reseal with clips; -58F to 239F EPDM; aluminum collar; 20-yr warranty |
| Item dimensions L x W x H | 14.5 x 14.5 x 6 inches |
| Manufacturer | Deks Dektite Pipe Boot Flashing |
| Material | EPDM |
| Material Type | EPDM |
| Model | DEKRF803G |
| Number of Items | 1 |
| Part Number | DEKRF803G |
| Style | Compact |
| Style Name | Compact |
| Unit Count | 1 Count |
| Water Resistance Level | Water Resistant |
K**R
Very pleased
I bought two of these to seal my two chimneys after installing a new metal roof. The base is very easy to form to the ribs of the metal roof, and it has starter indentations for the screws. The graduations in the rubber are easy to see, and it cuts easily. I did use a caulk to seal the underside where it impacts the roof, but I am not sure it was necessary. The rubber fits very snuggly around the pipe. I have no issue with leaks. Great product,
N**Y
Used for sauna chimney
I made the mistake last time of getting the wrong type of silicone that wasn’t heat resistant and it ended up 🔥 . I also only uses a single wall chimney, which obviously did not work. But this go around I splurged and I haven’t had any issues. Really simple to use. Super satisfying to cut the ring. Just make sure you don’t cut too deep, right? You can always cut more, but you want that snug fit.
A**R
BEST PRODUCT OUT THERE FOR INSULATED CHIMNEY
EASY TO INSTALL AND 100% WEATHERTIGHT WHEN INSTALLED CORRECTLY. COSTS A LITTLE MORE THAN COMPARED TO SOME OTHER OPTIONS BUT TOTALLY WORTH IT! VERY PLEASED
N**R
Does The Job
Got these for my tiny home. Easy to install but when I got them one was slightly bent on the metal part but easy enough to fix. Recommend. Will save you money over others and this works just fine.
R**.
Working great
made sealing the wood stove chimney to the metal roof a breeze
T**S
Great Product!
We installed a wood stove in our shipping container home this past weekend. We needed a rain stopper as with shipping container roofs there is not a slope to help with the rain runoff. We use a DuraVent triple-wall chimney and a DuraVent ceiling box on the inside. We cut the 10" diameter hole, inserted the chimney, and then worked on the roofing boot. This DekTite boot is incredible. I used a LocTite sealant around the chimney/hole and then used a silicon caulking under the rim. I used self-drilling screws in the container roof to mold the boot around our roof contours. I then used another bead of silicon caulking around the edge of the rim. Luckily, the boot was in place yesterday as the rain came last night. NO Leaking at all! Great Product!
L**S
Fits tight
#5 for 4-8" pipe. I needed this for 4 inch B vent (4.5" O.D.). Thought I'd damage it getting it started and without useing water as a lubricant I never would have got it pulled down two feet to the roof (9-12 pitch steel roof). Seems to be up to the task.
M**R
Perfect solution for putting wood stove in garage.
Be sure to use triple wall insulated pipe for going thru the roof or you will melt the flashing. DuraVent 6DP-24 DuraPlus Triple-Wall Chimney Pipe; For Wood Stoves, Fireplaces, Furnaces, Boilers, Stoves, Ranges, Water Heaters and Appliances Fueled by Wood, Oil, Coal or Gas, 6" Diameter x 24"
R**R
Great product
Came just as described was easy to install.
L**Z
Not a pretty color but great for high temp installation
Worked as expected. Easy install on a 12/12 metal Roof
N**E
It works seems good quality
Yup it works
A**R
Nice water proof seal for my woodstove chimney.
This product worked well for me. It was easy to trim to the proper diameter I needed and was a very flexible material which seemed to seal well against the chimney and roof of my hunting trailer. I used it to seal my woodstove insulated chimney which I put in my hunting trailer to heat it as my furnace failed last season. time will tell how good the product is but so far everything looks great.
D**S
Quality material
Quality material, easy markings for cutting to correct size, easy to install with pliable base.
Trustpilot
3 weeks ago
1 month ago