Aqua Select Cove Molding for 15 ft Round Above Ground Pools | Includes: (12) 46" Inch Sections | Easy Peel & Stick Installation | Durable Foam Construction Adds Pool Liner Protection

I should have purchased this product two liners ago. The strips formed to my 16' oval nicely. As soon as I stuck them to my pool wall they adhered very well and have not slipped away from where I attached them. My liner seems to have a much better fit as well, nice and snug from the floor to the top of the pool wall.

We have moles in our yard that dug under the pool and bit holes into the liner. We got 2 quotes to have someone replace our liner neither of which included the liner pad or cove, both were well over $3,000 for a 31' round above ground pool. We decided to try it ourselves. In addition to the cove we also bought the gorilla pad and put that in as well. We then installed our new liner. The entire process only took a day to complete and cost under $700. I would definitely recommend this product.

Great way to make a nice consistent cove. Installed on a new 30’ round pool. After reading the reviews on “bad adhesive” I decided to clean the part of the wall where the cove would be installed to be sure there would be no dust, sand or contaminants hindering the adherence of the cove. But once I took them out of the box I could see an obvious defect in the glue and it became obvious why adhesion could be a problem and it was. Installed on an 80deg day in the sun and they started to peel off the wall. Emailed customer care(WITH PHOTOS!) prior to installation after opening the box and seeing the problem. Was told it was fine.Looks to me there is a manufacturing defect and it's a problem. So my order was obviously defective and wasn’t offered a replacement or even a partial refund because I had to duct tape 97 feet of cove to the wall.

When our pool liner was destroyed by some animal leaving claw marks, we had to order a new one. When we took out that liner, we found that the original "professional" installer did NOT put any lining or pool cove in! So we ordered the 48 inch Peel and Stick Pool Cove for 24' Round Above Ground Pools and we were not disappointed! It arrived quickly and the packaging was in good shape. It was easy to install and we're pretty positive that it will last for a long time. Highly recommend!

They stuck initially but after I started installing the liner I noticed they were pulling away from the wall. I ended up having to duct tape all of them to the wall. If not for that I would give them 5 stars. It was a lot of work and extra money for 3 rolls of tape. In the end they work and look great.

Worked well, we bought this and had a few leftover (after installing in our 18X33). Stick well, hopefully will cut down on our hole near the corner issue we were experiencing with a graded alcove.

This made life easy, forget the sand cove and do this. Remove the worry of a perfect cove. We used for a 15’ round and it went great. If your at this point go ahead and just duck tape them for extra measure but the sticky back is strong if your surface is clean and you push hard to set it. Make sure to firmly place against each other so there aren’t gaps.

These were a great purchase. We did use the peel & stick, but we also placed a small strip of duct tape to hold these to the wall for additional hold. Nothing too crazy because the water weight will hold those down. Glad we choose to use these.